Black Box RM399-R2 Specification

Category
Rack accessories
Type
Specification

This manual is also suitable for

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
Customer
Support
Information
February 2010
MT1000A-85-R4
BL A C K B OX
®
Use this high-capacity shelf to mount a heavy
server.
Fixed Vented Server Shelf for 19" or 23" Rails
RM399-R2
RM403-R2
RM410-R2
RM589-R2
Specifications
Maximum Mounting Depth — RM399-R2, RM589-R2: 26" (66.1 cm);
RM403-R2: 33" (83.8 cm);
RM410-R2: 34" (86.4 cm)
Size RM399-R2: 0.88"H x 17.5"W x 22.25"D (2.2 x 44.5 x 56.5 cm);
RM403-R2: 0.88"H x 17.5"W x 27.25"D (2.2 x 44.5 x 69.2 cm);
RM410-R2: 0.88"H x 17.5"W x 30"D (2.2 x 44.5 x 76.2 cm);
RM589-R2: 0.88"H x 21.5"W x 22.25"D (2.2 x 54.6 x 56.5 cm)
Weight Capacity RM399-R2: 200 lb. (90.9 kg);
RM403-R2: 150 lb. (68.2 kg);
RM410: 150 lb. (68.2 kg);
RM589: 150 lb. (68.2 kg)
To continue, turn this page over
BL A C K BOX
®
FREE, live, 24/7 Tech Support is just 30 seconds away.
724-746-5500 | blackbox.com
© Copyright 2012. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box
®
and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any third-party
trademarks appearing in this publication are acknowledged to be the property of their respective owners.
RM399-R2, rev. 2
What‘s included
Your package should contain the following items. If anything is missing or damaged, contact Black Box Technical Support
at 724-746-5500 or info@blackbox.com.
Fixed Vented Server Shelf for 19" or 23" Rails
(4) mounting ears with (10) adjustment screws
(8) M6 cage nuts and screws
(8) 10-32 mounting screws
(8) 12-24 mounting screws
This specification sheet covers four models of Fixed, Vented Shelves (RM399-R2, RM403-R2, RM410-R2, and RM589-R2) for use
with data cabinets.
Each of these shelves has four “mounting ears“: two at the front and two at the back. To mount one of them in the cabinet, first
tilt the shelf far enough sideways to get past the cabinet’s rails, then maneuver it through the cabinet until its front and rear
mounting ears are even with the cabinet’s front and rear rails. Straighten the shelf back to level so that its front ears are flush
against the front of the cabinet’s front rails and its rear ears are flush against the back of the cabinet’s rear rails. Align the holes in
the mounting ears with an appropriate set of holes in the cabinet’s rails, then secure the shelf to the rails using the included
mounting hardware.
  • Page 1 1
  • Page 2 2

Black Box RM399-R2 Specification

Category
Rack accessories
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI