Tripp Lite SK10TG User manual

Tripp Lite
Brand
Tripp Lite
Model
SK10TG
Category
Surge protectors
Type
User manual

This manual is also suitable for

Tripp Lite SK10TG is a surge suppressor with a built-in timer that helps make connected devices more energy efficient. It features a 350-joule surge protection rating, which helps to protect your devices from power surges and spikes. The SK10TG also has a low power consumption operation that saves energy when not in use.

The SK10TG is easy to use. Simply plug it into a standard 3-pin power outlet and then plug your device into the SK10TG. You can then select the desired countdown time using the switch located on the left side of the SK10TG. Once the countdown timer reaches zero, the SK10TG will power down and the LED will turn off.

Tripp Lite SK10TG is a surge suppressor with a built-in timer that helps make connected devices more energy efficient. It features a 350-joule surge protection rating, which helps to protect your devices from power surges and spikes. The SK10TG also has a low power consumption operation that saves energy when not in use.

The SK10TG is easy to use. Simply plug it into a standard 3-pin power outlet and then plug your device into the SK10TG. You can then select the desired countdown time using the switch located on the left side of the SK10TG. Once the countdown timer reaches zero, the SK10TG will power down and the LED will turn off.

Surge Suppressor User Manual
Quick Setup GuideFeatures Quick Setup Guide Quick Setup Guide
www.tripplite.com/support
SK10TG
A
On / Off Button
B
Time Selector
C
LED Surge Protection
Indicator
D
LED Power Light
E
Device Outlet
A
B
C
D
E
1
Plug Surge Suppressor into any standard 3-pin
power outlet. It’s best to plug Surge Suppressor into
the top socket of a power outlet
so as not to obstruct
use of the second
outlet.
2
Plug a household device into the
Surge Suppressor.
3
Select your desired countdown time using the switch
located on the left side of your Surge Suppressor.
Recommended countdown settings for the
following devices:
• 1 HOUR: Hot Coil Items – hair straighteners,
clothes irons, soldering irons, toaster ovens,
coffee makers, fans.
• 3 HOURS: Mobile Electronics – chargers, mobile
phones, MP3 players, cameras.
• 6 HOURS: Chargers for Large Cordless Devices –
handheld vacuum cleaners, cordless drills.
12-12-080.indd 1 3/4/2013 12:17:29 PM
4
Push the start button on the top
of your Surge Suppressor.
Once you’ve done this, the
LED will illuminate red and
power will flow to your attached device.
NOTE: The On / Off button can turn off the unit any
time during operation.
5
Once the countdown timer reaches zero, your Surge
Suppressor will power down and the LED will turn
off. NOTE: When sitting idle the Surge Suppressor
uses no power.
Quick Setup Guide Quick Setup Guide Product Features Troubleshooting Specifications
NOTE: You can change your
countdown time setting at
any time during operation.
• Timer selection switch (1, 3 or 6 hours):
Helps make connected devices more energy efficient
• On / Off push button
• Red LED indicator lights when Surge Suppressor
is active
• Standard 3-pin power outlet compliant
• Does not obstruct the lower outlet of a standard 3-pin
power outlet when plugged into the top outlet
• Low power consumption operation saves energy
• 350-joule surge protection
When using the Surge Suppressor,
my device does not fully charge.
Make sure you have selected an appropriate time period
for the device you are trying to charge by referring to
step 3 of the Quick Setup Guide, or simply increase the
time period selected on the Surge Suppressor.
• Continuous Duty Electrical Rating:
120V~/15A /60Hz/1800W
• Standby Power Consumption: 0.75W
• Surge Protection:
1) Voltage Protective Rating: 400V
2) Max. Surge Voltage: 6000V
3) Max. Spike Current: 6500A
4) Response Timer: <1 nanosecond
Safety Information
• Important: Use indoors in a dry location.
• Contains no user-serviceable parts; do not open.
12-12-080 93-327D
12-12-080.indd 2 3/4/2013 12:17:29 PM
  • Page 1 1
  • Page 2 2

Tripp Lite SK10TG User manual

Tripp Lite
Brand
Tripp Lite
Model
SK10TG
Category
Surge protectors
Type
User manual
This manual is also suitable for

Tripp Lite SK10TG is a surge suppressor with a built-in timer that helps make connected devices more energy efficient. It features a 350-joule surge protection rating, which helps to protect your devices from power surges and spikes. The SK10TG also has a low power consumption operation that saves energy when not in use.

The SK10TG is easy to use. Simply plug it into a standard 3-pin power outlet and then plug your device into the SK10TG. You can then select the desired countdown time using the switch located on the left side of the SK10TG. Once the countdown timer reaches zero, the SK10TG will power down and the LED will turn off.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents