Premier SX-3209MU User manual

Brand: Premier

Model: SX-3209MU

Category: CD players

Type: User manual

INSTRUCTION MANUAL

PORTABLE AM/FM CD/MP3 WITH USB BOOMBOX PLAYER

SX-3209MU

DEAR CUSTOMER

Congratulations for your purchase!

Please read this manual carefully, and keep it for future reference.

If you need extra support, please write to [email protected]

P-1

CAUTION

RISK OF ELECTRIC

SHOCK, DO NOT

OPEN

Caution: To reduce the risk of electric shock do not open

this device, there are not serviceable parts for customers.

Please refer any maintenance or repair to qualified

personnel.

This sign means the existence of dangerous voltage at

the inside of the unit, which states a risk of electric shock.

This sign means that there are important instructions of

operation and handling in the manual that comes

with this

device.

PREMIER CUSTOMER SERVICE

Venezuela: 0800 – ELECTRIC (353-2874)

Colombia: 01-900-331-PEJC (7352)

Panama: 300-5185

Website www.premiermundo.com

E-mail: [email protected]

NOTE

This unit may be submitted to changes in specifications, characteristics and/or operation without prior

notice to the user, in order to continue improving and developing its technology.

P-2

TABLE OF CONTENTS

1. Getting Started

a. Introduction ……………………………………………………………………………………

b. Location of Controls (top, speaker, right, left) …………………………………………….

c. AC Operation …..……………………………………………………………………………. 5

d. Battery Operation ………………………………...………………………………………….

e. Antenna ……………………………………………………………………………………….

2. Operational Instructions

a. Listening to the Radio……….………………………..…….......................………………. 6

b. Listening to CDs and MP3 Playback ………………………………………………………

c. Audio CD Playback and MP3 Playback ……………………………………………………

d. Play/Pause Mode ………………….…………………………………………………………

e. Skip and Search Mode ………………………………………………………………………

f. Repeat Mode …………………………………………………………………………………

g. Random Play Mode …………………………………...……………………………………..

h. Intro Play Mode ……………………………………………….……………………………...

i. Program Mode ………………………………………………………………………………..

j. Playing Other Audio Devices ……………………………………………………………….

3. Maintenance & Specifications

a. Notes on CDs………………………………………………………………………………….

b. Cleaning the Lens…………………………………………………………………………….

c. Cleaning the Cabinet…………………………………………………………………………

d. Troubleshooting Guide……………………………………………………………………….

e. Technical Specifications……………………………………………………………………...

P-3

GETTING STARTED

Thank you for purchasing the CD/MP3 Boombox Player. Unpack the unit and make sure to put aside

all accessories so they will not be lost. We recommend that you retain the original carton and

packaging materials for future use, should you transport or ship the unit in the future.

Portable stereo audio system

• Fully Programmable CD/MP3 Player

• Supports CD/MP3 / CD-R / CD-RW / USB

• LCD Display with backlight

• Analog AM / FM Radio with digital display

• Supports Repeat 1, Repeat All , Random and Intro

• Skip & Search CD Play Functions

• Telescoping FM Antenna

• Folding Handle

• 3.5mm built in AUX/MP3-IN jack

What’s included

• Portable CD Boom box

• Instruction manual

P-4

GETTING STARTED

Location of Controls

1 2 3 4 5 6 7 8 9 10 11 12 13 2 14 15

P-5

GETTING STARTED

Location of Controls-continued

1. HANDLE 9. LCD SCREEN

2. SPEAKERS 10. PLAY / PAUSE / USB BUTTON

3. FM ANTENNA 11. FOLD+/10+ BUTTON

4. VOLUME CONTROL KNOB 12. F-SKIP BUTTON

5. MODE/PROG./REPEAT/RAM BUTTON 13. TUNING KNOB

6. B-SKIP BUTTON 14. CD DOOR

7. FOLD-/10- BUTTON 15. FUNCTION SWITCH

8. STOP BUTTON 16. AUX / MP3-IN JACK

AC Operation

Before operating the unit, make sure that the voltage on the unit corresponds to the voltage of your

local area. Unravel the AC Line Cord; insert one end into an AC socket on the unit and the other end

into a standard AC outlet.

1. In case of malfunction due to electrostatic discharge (ESD), reset the unit by reconnecting the AC

cord again to resume to normal operation.

2. When not in use, unplug the AC power cord from the AC power socket.

Battery Operation

Disconnect the AC Cord. Open the BATTERY COMPARTMENT and insert 8 x UM-2/C batteries (not

included) making sure that the battery polarity (+/-) is observed.

Remove the batteries if the unit will not be used for a long period of time.

Antenna

For best FM reception, fully extend the FM ANTENNA. For AM reception, the unit has a built-in

antenna, turn the whole unit for best reception.

P-6

OPERATING INSTRUCTIONS

LISTENING TO THE RADIO

Slide the FUNCTION SWITCH to the AM or FM position. Turn the TUNING KNOB to your desired radio

station. Adjust the sound level by rotating the VOLUME CONTROL KNOB. To turn off the radio, simply

slide the FUNCTION SWITCH to OFF position.

Note: Radio frequency is shown on the Display.

LISTENING TO CDs DISC

Open the CD DOOR, place a CD disc into the CD COMPARTMENT and close the CD DOOR. Set the

FUNCTION SWITCH to the CD/AUX/MP3-IN/USB position. Adjust the sound level by rotating the

VOLUME CONTROL KNOB.

Note: Before playing a CD make sure the CD DOOR is properly closed.

LISTENING TO MP3 PLAYBACK

Open the CD DOOR, place a MP3 playback disc into the CD COMPARTMENT and close the CD

DOOR. Set the FUNCTION SWITCH to the CD/AUX/MP3-IN/USB position. Adjust the sound level by

rotating the VOLUME CONTROL KNOB.

Note: Before playing a MP3 playback disc make sure the CD DOOR is properly closed.

AUDIO CD PLAYBACK

1. When the CD DOOR is closed and a CD is inside, the total number

of the tracks in the disc show on the LCD SCREEN and will enter

Stop mode. The CD indicator will always show on the LCD SCREEN

when the unit is in CD mode.

2. If there has no disc inside, the LCD SCREEN will show “ d” and

remain in Stop mode.

3. If the CD DOOR is not closed, the LCD SCREEN will show “OP”.

PLAY/PAUSE MODE

1. When the PLAY/PAUSE/USB BUTTON is pressed during CD stop

mode, the first track will play. The Play Indicator “” will show on the

LCD SCREEN. The LCD SCREEN will also show the number of

the track playing.

2. For interruption while the CD is playing, press the CD PLAY/PAUSE/

USB BUTTON once. Playback is now paused, the Play Indicator “”

and the number of track will blink continuously on the LCD SCREEN.

3. Though the sound stops, the disc will continue to spin. To re-start playback, press the

PLAY/PAUSE/USB BUTTON again. The music will start from the exact position where it was

interrupted.

P-7

OPERATING INSTRUCTIONS

AUDIO CD PLAYBACK-CONTINUED

PLAY/PAUSE MODE-CONTINUED

4. To stop the CD, press the STOP BUTTON once in Play or Pause mode. The LCD SCREEN will

show the total number of tracks on the disc again.

5. To turn off the unit, slide the FUNCTION SWITCH to OFF position.

AUDIO MP3 PLAYBACK

1. When the CD DOOR is closed and a MP3 playback disc is inside,

the total number of the tracks in the disc show on the LCD SCREEN

and will enter Stop mode. The MP3 indicator will always show on the

LCD SCREEN when the SX-3209MU is in MP3 mode.

2. If there has no disc inside, the LCD SCREEN will show “ d” and

remain in Stop mode.

3. If the CD DOOR is not closed, the LCD SCREEN will show “OP”.

PLAY/PAUSE MODE

1. When the PLAY/PAUSE/USB BUTTON is pressed during MP3 stop

Mode, the first track will play. The Play Indicator “” will show on the

LCD SCREEN. The LCD SCREEN will also show the number of the

track playing and the folder.

2. For interruption while the MP3 playback disc is playing, press the CD

PLAY/PAUSE/USB BUTTON once. Playback is now paused, the Play

Indicator “” and the number of track will blink continuously on the

LCD SCREEN.

3. Though the sound stops, the disc will continue to spin. To re-start playback, press the

PLAY/PAUSE/USB BUTTON again. The music will start from the exact position where it was

interrupted.

4. To stop the MP3 playback, press the STOP BUTTON once in Play or

Pause mode. The LCD SCREEN will show the total number of tracks

on the disc again.

5. To turn off the unit, slide the FUNCTION SWITCH to OFF position.

Noted: In MP3 Play mode, the MP3 file no. will appears on display every

5 seconds.

P-8

OPERATING INSTRUCTIONS

AUDIO CD PLAYBACK

Skip and Search Mode

1. In play or pause mode, when CD F-SKIP  or CD B-SKIP  BUTTON is pressed once, the player

will advance to the next track or return to the beginning of the track.

2. During play mode, when CD F-SKIP  or CD B-SKIP  BUTTON is pressed and held, it will

search the track with audible high-speed forward or backward playback.

AUDIO MP3 PLAYBACK

Skip and Search Mode

1. In play or pause mode, when MP3 F-SKIP  or MP3 B-SKIP  BUTTON is pressed once, the

player will advance to the next track or return to the beginning of the track.

2. During play mode, when MP3 F-SKIP  or MP3 B-SKIP  BUTTON is pressed and held, it will

search the track with audible high-speed forward or backward playback.

3. For the MP3 play or stop mode, when FOLD+/10+  or FOLD-/10-  BUTTON is pressed once,

the player will advance to the next 10 tracks or return to the beginning of the 10 tracks.

Skip and Search Folder(MP3) Mode

4. When the MP3 play mode, press the MODE/PROG./REPEAT/RAM BUTTON twice, the ALBUM

REP. indicator show on the LCD SCREEN. when pressing and held FOLD+/10+  or FOLD-/10-

 BUTTON, the folder will advance to the next or return to the beginning of the folder.

REPEAT MODE(CD)

1. Repeat 1:

When the CD play mode, press the MODE/PROG./REPEAT/RAM

BUTTON once, the REP. indicator show on the LCD SCREEN.

This single track of music will be repeated.

2. Repeat All:

When the CD play mode, press the MODE BUTTON twice, the

REP. ALL indicator show on the LCD SCREEN. The whole disc will

be played continuously.

3. To cancel the Repeat Function

Press the MODE/PROG./REPEAT/RAM BUTTON repeatedly until the Repeat Indicator

disappears from the LCD SCREEN.

REPEAT MODE(MP3)

1. Repeat 1:

When the MP3 play mode, press the MODE/PROG./REPEAT/RAM

BUTTON once, the REP. indicator show on the LCD SCREEN. This

single track of music will be repeated.

2. Repeat All:

When the MP3 play mode, press the MODE/PROG./REPEAT/RAM

BUTTON three times, the REP. ALL indicator show on the LCD

SCREEN. The whole disc will be played continuously.

P-9

OPERATING INSTRUCTIONS

AUDIO MP3 PLAYBACK-CONTINUED

REPEAT MODE-CONTINUED

3. Repeat Album:

When the MP3 play mode, press the MODE/PROG./REPEAT/RAM BUTTON twice, the

REP. ALBUM indicator will show on the LCD SCREEN. The whole folder of the MP3 music will be

played continuously.

4. To cancel the Repeat Function

Press the MODE/PROG./REPEAT/RAM BUTTON repeatedly until the Repeat Indicator disappears

from the LCD SCREEN.

RANDOM PLAY MODE

This feature allows the track on the disc to be played in random order.

1. In CD play mode, press the MODE/PROG.REPEAT/RAM BUTTON three

times.The RANDOM indicator will show on the LCD SCREEN and all

music will play in random order.

2. To cancel the Random play function, press the MODE/PROG./REPEAT/RAM BUTTON repeatedly

until the RANDOM indicator will disappear from the LCD SCREEN.

INTRO PLAY MODE

This feature allows each of the tracks on the disc to be played only 10 seconds for the next song.

1. In CD play mode, press the MODE/PROG./REPEAT/RAM BUTTON four times. The INTRO

indicator will show on the LCD SCREEN and each file will play only 10 seconds for each song.

2. To cancel the Intro play function, press the MODE/PROG./REPEAT/RAM BUTTON again.

The INTRO indicator will disappear from the LCD SCREEN.

Note: This function cannot work during MP3 disc Playback.

PROGRAM MODE(CD)

1. During the CD stop mode, press the MODE/PROG./REPEAT/RAM

BUTTON once. The PROGRAM indicator will blink continuously and the

number of Program to be memorized starts from the first program “ ” on the LCD SCREEN.

2. Press the CD F-SKIP  or B-SKIP  BUTTON or CD FOLD -/10- or FOLD +/10+ BUTTON to

your desired musical track, the LCD SCREEN will show the appropriate track number. Press the

MODE/PROG./REPEAT/RAM BUTTON again to store this track in memory.

3. Repeat above procedure until all desired tracks have been programmed.

For CD playback, a total of 20 tracks can be stored in memory.

Press the CD PLAY/PAUSE/USB BUTTON once to start the program playback

and the Program Indicator “” will show on the LCD screen.

P-10

OPERATING INSTRUCTIONS

Audio MP3 Playback-continued

Program Mode(CD)-Continued

4. To check the program you have stored after complete programming

during CD stop mode, then press the CD F-SKIP  BUTTON once,

The LCD SCREEN will show the first programmed track number.

Repeat above procedure to read all the programmed memory.

5. To cancel the programmed memory:

• During the CD stop mode, press the CD STOP BUTTON once, or

• Open the CD DOOR during the CD stop mode.

The Program Indicator will disappear from the LCD SCREEN.

Program Mode(MP3)

1. During the MP3 playback stop mode, press the MODE/PROG./

REPEAT/RAM BUTTON once. The PROGRAM indicator will blink

continuously and the number of Program to be memorized starts from

the first program “ ” on the LCD SCREEN.

2. Press the F-SKIP  or B-SKIP  BUTTON or FOLD -/10- or FOLD +/10+ BUTTON to your desired

musical track, the LCD SCREEN will show the appropriate track number. Press the

MODE/PROG./REPEAT/RAM BUTTON again to store this track in memory.

3. Repeat above procedure until all desired tracks have been programmed. For CD playback, a total of

99 tracks can be stored in memory.

4. Press the MP3 PLAY/PAUSE/USB BUTTON once to start the program

playback and the Program Indicator “” will show on the LCD screen.

5. To check the program you have stored after complete programming.

During MP3 stop mode, then press the MP3 F-SKIP  BUTTON once,

The LCD SCREEN will show the first programmed track number.

Repeat above procedure to read all the programmed memory.

6. To cancel the programmed memory:

• During the MP3 stop mode, press the CD STOP BUTTON once, or

• Open the CD DOOR during the MP3 stop mode.

The Program Indicator will disappear from the LCD SCREEN.

7. External memory Media Operation (USB)

• Prepare the player for the External Memory media operation.

• Insert a USB date traveler into the USB port, set the function switch

to the CD/AUX/MP3-IN/USB.

• The USB shows in the LCD and after the USB is successfully detected

and read, the track number as a total shows in the LCD.

P-11

Note: During CD or MP3 playback is inside, when press and hold the PLAY/PAUSE/USB BUTTON,

CD/MP3 mode will automatically change to the USB mode.

Playing Other Audio Devices

The SX-3209MU features an AUX/MP3-IN jack to facilitate playback from other audio devices (MP3

players, computers) through 3.5mm plug.

1. Insert a 3.5mm plug and cable (not included) into the AUX/MP3-IN jack in the back of the unit.

2. Slide the FUNCTION SWITCH to CD / AUX / MP3-IN / USB. If device is plugged into the

AUX/MP3-IN jack, the LCD Screen will read “AU.”

3. Turn the additional device on and follow the playback instructions found in its owner’s manual.

4. Do discontinue playback of additional devices, slide the FUNCTION SWITCH to OFF.

Note: When an audio device is plugged into this unit while a CD is playing, CD playback will stop

automatically and switch to AUX/MP3-IN mode.

MAINTENANCE

NOTES ON CDs

1. Before playing, clean the CD with a cleaning cloth. Wipe the CD from

the center out to the ends.

2. Do not use solvents such as benzine, thinner, commercially available

cleaners or anti-static spray intended for vinyl LPs.

3. Do not expose the CD to direct sunlight or heat sources such as hot air ducts. Do not expose to

direct sunlight, nor leave CDs in a car, as there can be a considerable rise in temperature.

4. Do not stick paper or sticker on the CD. Do not scratch, dirt or fingerprints on the CD, for it may

cause tracking error.

Cleaning the lens

If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a

commercially available lens cleaner.

Cleaning the cabinet

Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent

solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or

benzine.

P-12

TROUBLESHOOTING GUIDE

When the instructions in this manual are followed, this unit should function properly. However, if any of

the following difficulties occur and cannot be corrected by the user or if a problem arises that is not

mentioned here, please contact PREMIER Customer Service or a qualified service technician.

1. Unit Does Not Play

• Unit may be disconnected from power source (No AC connection or batteries). Check connection.

• Disc is not correctly set. CDs should be inserted label side up.

• Disc is scratched or dirty. Please clean.

• The lens is dirty. Wipe clean gently with soft, dry cloth. Follow the instructions of the lens cleaner.

• There is moisture on the lens wait an hour and try again.

2. No Sound, Distorted Sound or Feedback

• Ensure plugs are inserted firmly.

• Wipe off plugs with clean cloth.

• Disc is scratched or dirty. Please clean.

• Volume control is turned down. Please increase.

3. Radio Reception is Unclear

• Radio station frequency may be weak. Adjust antenna.

Technical Specifications

• Audio Output: 1.2W

RMS

(L) + 1.2W

RMS

(R)

o Total: 2.4W

RMS

/ 4.8W

PEAK

/ 360W

PMPO

• Frequency Range

o AM: 530kHz – 1700kHz

o FM: 88MHz – 108MHz

• Connectivity

o 3.5mm AUX/MP3-IN jack

• Power Requirement

o AC 110V~220V, 60Hz~50Hz

o Battery: 12V (8 x “C” size or UM2 batteries, not included)

• Power Consumption: ≤ 15W

• Unit Dimensions (W x H x D): 11.6” x 4.7” x 8.9” (295mm x 120mm x 227mm)

• Unit Weight: 4.67Lbs (2.1kg)

P-13

CIRCUIT DIAGRAM

P-14

P-15

Premier SX-3209MU User manual

Brand: Premier

Model: SX-3209MU

Category: CD players

Type: User manual

Download PDF

report

Premier SX-3209MU User manual

Premier SX-3209MU User manual

Related papers

Other documents