BrandMotion ADAS-1020v1 Installation guide

Brand: BrandMotion

Model: ADAS-1020v1

Type: Installation guide

! INSTALLATION!INSTRUCTIONS!

ADAS-1020 Instructions 1-10-18 Page 1 of 2

ADAS+ Seat Belt Vibration Alert Module

(Kit # ADAS-1020)

Please read thoroughly before starting installation and check that kit contents are complete.

Items Included in the Kit:

Tools & Supplies Needed:

Seat Belt Vibration Alert Module

These instructions

Wire strippers

Wire cutters

Electrical tape

Zip ties

Plastic panel removal tools

Digital Volt Meter / BCM safe test light

Screwdriver

Socket set

Wrench

Safety Precautions:

• Work in well ventilated area that is clear of obstructions.

• Secure vehicle with tire chucks in both front and rear of tires.

• Turn vehicle accessories OFF and ensure ignition key is in OFF position.

• Wear safety goggles and snug fitting clothes.

• Use tools only for their intended purpose and which are in good repair.

• Only perform this task if confidence, skill, and physical ability permit.

NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color

instructions, as well as an installation video, please visit www.brandmotion.com

! INSTALLATION!INSTRUCTIONS!

ADAS-1020 Instructions 1-10-18 Page 2 of 2

1. The white plug on the vibration module

plugs into the connector on the HUB from

the main ADAS-100 unit marked vibrator.

2. The module can be mounted 2 ways.

2a. Insert the module into the black cloth

sleeve and attach to the vehicle seat belt.

Attach the belt that DOSE NOT move or

retract.

Take caution not to pinch the cable

in the track from the seat.

2b. Cut a small slit in the bottom seat foam

from under the seat. Be careful not to cut

the seat cover be going all the way through.

Insert the module into the foam and secure

module to foam. Run the cable with any

factory harnesses and secure with zip ties.

Take caution not to pinch the cable in the

track from the seat.

The switch on the module will change the

output of the vibration.

1-low

2-medium

3-high

BrandMotion ADAS-1020v1 Installation guide

BrandMotion ADAS-1020v1 Installation guide

BrandMotion ADAS-1020v1 Installation guide

Related papers

Other documents