GE JXS56SS Installation guide

GE
Brand
GE
Model
JXS56SS
Type
Installation guide

This manual is also suitable for

GE JXS56SS is a heavy-duty wall-mount range hood that will effectively remove smoke, steam, and odors from your kitchen. With a maximum airflow of 600 CFM, this range hood can handle even the most demanding cooking conditions. The range hood also features three fan speeds, so you can choose the right amount of ventilation for your needs. The halogen lighting provides bright task lighting for your cooktop, and the dishwasher-safe filters make cleanup a breeze.

Here are some of the benefits of using the GE JXS56SS range hood:

  • Effectively removes smoke, steam, and odors from your kitchen
  • Three fan speeds provide the right amount of ventilation for your needs

GE JXS56SS is a heavy-duty wall-mount range hood that will effectively remove smoke, steam, and odors from your kitchen. With a maximum airflow of 600 CFM, this range hood can handle even the most demanding cooking conditions. The range hood also features three fan speeds, so you can choose the right amount of ventilation for your needs. The halogen lighting provides bright task lighting for your cooktop, and the dishwasher-safe filters make cleanup a breeze.

Here are some of the benefits of using the GE JXS56SS range hood:

  • Effectively removes smoke, steam, and odors from your kitchen
  • Three fan speeds provide the right amount of ventilation for your needs
Installation
Instructions
TOOLS YOU NEEDKIT CONTENTS
1 – Filler Panel
2 – Screws
2 – Washers
Filler Panel
For 15” Deep Cabinets
31-2000041 07-16 GEA
Safety Glasses
Philips
Screwdriver
IMPORTANT: Filler panel must be installed onto the hood before the hood is installed onto the cabinet.
1
Remove the protective film from the filler panel
and use care to prevent scratching the brushed
stainless steel surface.
2
The filler panel has a thin edge which contacts
the wall behind the hood. Be careful about how
much force you use to make the filler panel
edge contact the wall behind the hood to prevent
damage to the wall.
3
The filler panel is mounted using two screws
and washers. Align the filler panel with the lower
surface of the hood and start the screw into the
hole in the filler panel. There is clearance in the
holes in the hood so that you can make the filler
panel align with the lower surface of the hood.
Tighten the screws once you confirm the filler
panel aligns with the hood lower surface.
4
Before mounting the hood to cabinet, fasten
wood piece to wall to back-up the filler panel
(see picture below).
NOTE: The filler panel will protrude slightly from
the side of the hood.
NOTE: Use caulk if desired to trim out to wall.
Gloves
Filler Panel
Use caulk if
desired to trim
out to wall.
Fasten wood
piece supplied
by installer to
wall to back-up
the filler panel
Cooktop
or Range
Hood
15” Cabinet
Hood
Screw
Filler Panel
Washer
Instrucciones
de Instalación
HERRAMIENTAS QUE NECESITARÁCONTENIDOS DEL KIT
1 – Panel de Relleno
2 – Tornillos
2 – Arandelas
31-2000041 07-16 GEA
Gafas de
Seguridad
Destornillador
Phillips
IMPORTANTE: El panel de relleno debe ser instalado en la campana antes de que esta última sea instalada en el gabinete.
1
Retire la película protectora del panel de relleno y
tenga cuidado a fin de evitar rayar la superficie de
acero inoxidable cepillada.
2
El panel de relleno posee un extremo Delgado que
tiene contacto con la pared trasera de la campana.
Tenga cuidado en relación a cuánta fuerza usará
para hacer que el extremo del panel de relleno tome
contacto con la pared que está detrás de la campana,
a fin de evitar daños sobre la pared.
3
El panel de relleno se debe montar usando dos
tornillos y arandelas. Alinee el panel de relleno con la
superficie inferior de la campana y coloque el tornillo en
el agujero del panel de relleno. Hay un espacio en los
agujeros de la campana para poder hacer que el panel
de relleno quede alineado con la superficie inferior de
la campana. Ajuste los tornillos una vez que confirme
que el panel de relleno está alineado con la superficie
inferior de la campana.
4
Antes de montar la campana en el gabinete, ajuste la
pieza de madera a la pared para darle soporte al panel
de relleno (vez la siguiente imagen).
NOTA: El panel de relleno quedará levemente
pronunciado en relación al costado de la campana.
NOTA: Use masilla para que quede recortado sobre
la pared.
Guantes
Panel de Relleno
Use masilla para
que quede recortado
sobre la pared.
Ajuste a la
pared la pieza
de madera
suministrada por
el instalador,
para darle
soporte al panel
de relleno.
Superficie
de Cocción
o Cocina
Campana
Gabinete de 15”
Campana
Tornillo
Panel de Relleno
Arandela
Panel de Relleno
Para Gabinetes de 15” de Profundidad
  • Page 1 1
  • Page 2 2

GE JXS56SS Installation guide

GE
Brand
GE
Model
JXS56SS
Type
Installation guide
This manual is also suitable for

GE JXS56SS is a heavy-duty wall-mount range hood that will effectively remove smoke, steam, and odors from your kitchen. With a maximum airflow of 600 CFM, this range hood can handle even the most demanding cooking conditions. The range hood also features three fan speeds, so you can choose the right amount of ventilation for your needs. The halogen lighting provides bright task lighting for your cooktop, and the dishwasher-safe filters make cleanup a breeze.

Here are some of the benefits of using the GE JXS56SS range hood:

  • Effectively removes smoke, steam, and odors from your kitchen
  • Three fan speeds provide the right amount of ventilation for your needs
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents