Roland STUDIO-CAPTURE Owner's manual

Type
Owner's manual

Roland STUDIO-CAPTURE: Your Gateway to Professional Audio Creation

Roland STUDIO-CAPTURE is a high-performance USB audio interface that empowers you to record and produce music with exceptional clarity and versatility. With its pristine sound quality, comprehensive connectivity options, and user-friendly design, STUDIO-CAPTURE is the ideal choice for musicians, producers, and content creators seeking a reliable and feature-rich audio interface.

Key Features:

  • Superior Audio Quality: Experience pristine sound reproduction with support for up to 24-bit/192kHz audio resolution, ensuring your recordings capture every nuance and detail.

Roland STUDIO-CAPTURE: Your Gateway to Professional Audio Creation

Roland STUDIO-CAPTURE is a high-performance USB audio interface that empowers you to record and produce music with exceptional clarity and versatility. With its pristine sound quality, comprehensive connectivity options, and user-friendly design, STUDIO-CAPTURE is the ideal choice for musicians, producers, and content creators seeking a reliable and feature-rich audio interface.

Key Features:

  • Superior Audio Quality: Experience pristine sound reproduction with support for up to 24-bit/192kHz audio resolution, ensuring your recordings capture every nuance and detail.
You must attach the ferrite core before using the STUDIO-CAPTURE
If you are connecting a digital device to the COAXIAL IN (15/16) jack, you must attach the included
ferrite core.
This is for the purpose of preventing electromagnetic noise; do not remove it.
1. Attach the ferrite core to the coaxial cable.
STUDIO-CAPTURE
Ferrite core
Coaxial cable
Digital device
* You must attach the ferrite core near the plug that is
connected to the STUDIO-CAPTURE.
2. Press the halves together until they click shut.
* Be careful not to pinch your ngers when attaching the ferrite core.
* Do not damage the cable by pinching it excessively with the ferrite core.
MEMO
If the cable included with your digital device is thin, the attached ferrite core may slide along
the cable. If so, use a band or adhesive tape to fasten the ferrite core in place. One such band is
included.
Band for fastening the core
To prevent accidental ingestion of the ferrite core and the band, always keep them out of the reach of
small children.
Attaching the Ferrite Core
STUDIO-CAPTURE
Copyright © 2013 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of
ROLAND CORPORATION.
* 5 1 0 0 0 3 4 4 5 7 - 0 1 *
お使い必ずアを付けい。
COAXIAL IN(15/16)端子にデジタル機器をつなぐときは、付属のフェライト・コアを
取り付けてください。
電磁ノイズ防止用ですので取り外さないでください。
1.
フェライト・コアをコアキシャル・ケーブルに取り付けます。
STUDIO-CAPTURE
フェライト・コア
コアキシャル・ケーブル
デジタル機器
必ず、STUDIO-CAPTURE側のプラグの間近に取り付
けてください。
2.
カチッと音がするまで押し込みます。
フェライト・コアを取り付けるとき、指などを挟まないようにご注意ください。
フェライト・コアを閉めるとき、ケーブルを無理に挟まないでください。
お使いのデジタル機器に付属のコアキシャル・ケーブルが細い場合、取り付けたフェラ
イト・コアが緩んで動いてしまうことがあります。このような場合は、バンドやテープ
などで固定してください。固定用のバンドは 1 本付属しています。
固定用バンド
フェライト・コアとバンドはお子様が誤って飲み込んだりすることのないよう手の届かないとこ
ろへ保管してください。
の取付け
STUDIO-CAPTURE
© 2013 ローランド株式会社
本書の一部、もしくは全部を無断で複写・転載することを禁じます。
  • Page 1 1
  • Page 2 2

Roland STUDIO-CAPTURE Owner's manual

Type
Owner's manual

Roland STUDIO-CAPTURE: Your Gateway to Professional Audio Creation

Roland STUDIO-CAPTURE is a high-performance USB audio interface that empowers you to record and produce music with exceptional clarity and versatility. With its pristine sound quality, comprehensive connectivity options, and user-friendly design, STUDIO-CAPTURE is the ideal choice for musicians, producers, and content creators seeking a reliable and feature-rich audio interface.

Key Features:

  • Superior Audio Quality: Experience pristine sound reproduction with support for up to 24-bit/192kHz audio resolution, ensuring your recordings capture every nuance and detail.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages