Triton Systems TDM Owner's manual

TDN 07103-00170

TDM-200 EXTENSION BRACKET INSTALLATION

! Pull the release pin (under tray) and rotate the turntable 180° clockwise. Release pin and lock turntable

in place. This is the “SERVICE” position (cassettes will be facing out when installed).

! Install the tray extension bracket and secure with two (2) pan head screws provided. Pull the release pin

and rotate the turntable 180° counterclockwise. This is the “OPERATE” position (cassettes will be

towards the rear).

DERIUQERSLOOT

revirdwercSspillihP

tiKtekcarBnoisnetxE002-MDT

)46100-00260N/P(

DEILPPUSSTRAP

REBMUNTRAP NOITPIRCSED YTITNAUQ

11810-11030noisnetxEyssAyarT002-MDT1

46100-45020

)rehsawhtoottxe/w("4/1x23-6#,daeHnaP,wercS2

07100-30170noit

allatsnItekcarBnoisnetxE002-MDT1

Download PDF