Miller KA000000 is a power supply adapter that provides 115 volts AC power when only 230 volts AC power is available at the installation site. It can be mounted to the top or side of a welding power source or secured to the floor. The adapter has a 10 ft. (3 m) two conductor and ground power cord and is designed to be operated from a single-phase, 60 Hertz, AC power supply with a line voltage of 230 volts. It features overload protection with a fuse located on the rear of the adapter. The unit is capable of delivering 1.3 amperes maximum at 115 volts AC output.