Miller INTELLIMATE DW Owner's manual

Category
Welding System
Type
Owner's manual

This manual is also suitable for

Miller INTELLIMATE DW is an interface control that allows an INTELLIMATIC S-52M, S-54M, D-52M, or D-54M wire feeder, or SS-12M, SS-16M, DS-12M, or DS-16M SWINGARC to be used with a DELTAWELD series welding power source. It provides the following capabilities:

  • Changing DIP switch positions inside the INTELLIMATIC wire feeder
  • Installation of the interface control
  • Interface cable connections
  • 115 volts/contactor control connections
  • Voltage control connection
  • Current relay (reed switch) connections and installation
  • Pilot light
  • Operation
  • Shutting down
  • Inspection and upkeep
  • Overload protection

Miller INTELLIMATE DW is an interface control that allows an INTELLIMATIC S-52M, S-54M, D-52M, or D-54M wire feeder, or SS-12M, SS-16M, DS-12M, or DS-16M SWINGARC to be used with a DELTAWELD series welding power source. It provides the following capabilities:

  • Changing DIP switch positions inside the INTELLIMATIC wire feeder
  • Installation of the interface control
  • Interface cable connections
  • 115 volts/contactor control connections
  • Voltage control connection
  • Current relay (reed switch) connections and installation
  • Pilot light
  • Operation
  • Shutting down
  • Inspection and upkeep
  • Overload protection
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Miller INTELLIMATE DW Owner's manual

Category
Welding System
Type
Owner's manual
This manual is also suitable for

Miller INTELLIMATE DW is an interface control that allows an INTELLIMATIC S-52M, S-54M, D-52M, or D-54M wire feeder, or SS-12M, SS-16M, DS-12M, or DS-16M SWINGARC to be used with a DELTAWELD series welding power source. It provides the following capabilities:

  • Changing DIP switch positions inside the INTELLIMATIC wire feeder
  • Installation of the interface control
  • Interface cable connections
  • 115 volts/contactor control connections
  • Voltage control connection
  • Current relay (reed switch) connections and installation
  • Pilot light
  • Operation
  • Shutting down
  • Inspection and upkeep
  • Overload protection

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI