Miller KJ29 Owner's manual

Miller
Brand
Miller
Model
KJ29
Type
Owner's manual

This manual is also suitable for

Miller KJ29 is a versatile running gear designed to enhance the portability and functionality of your welding power source. It features sturdy construction, ensuring stability and durability. The running gear includes two 10-inch wheels for smooth maneuvering, providing ease of movement even on rough surfaces. Additionally, it comes equipped with a bottle support for securing gas cylinders, keeping them稳固and organized.

Miller KJ29 is a versatile running gear designed to enhance the portability and functionality of your welding power source. It features sturdy construction, ensuring stability and durability. The running gear includes two 10-inch wheels for smooth maneuvering, providing ease of movement even on rough surfaces. Additionally, it comes equipped with a bottle support for securing gas cylinders, keeping them稳固and organized.

OWNER’S MANUAL
FORM: OM-632 191 281C
April 2001
No. 28 (043 861) And No. 32 (194 997) Running Gear
ELECTRIC SHOCK can kill.
• Do not touch live electrical parts.
• Turn Off welding power source and input disconnect
device.
• Disconnect input power conductors from
deenergized supply BEFORE moving welding
power source.
CYLINDERS can explode if damaged.
• Keep cylinders away from welding and other
electrical circuits.
• Never touch cylinder with welding electrode.
• Always secure cylinder to running gear, wall, or
other stationary support.
FALLING EQUIPMENT can cause injury
and damage.
• Use proper equipment to lift and support unit.
• Use lifting forks long enough to extend out opposite
side of base.
• Do not put any body part under unit while lifting.
WARNING
Ref. miscwarn1.1 6/98
ST-802 192/ ST-802 191
Tools Needed:
3/8 in
Part
No.
Item
No.
Description (Qty)
1 191 166 Handle, LH (1) (No. 28 RG)
1 204 295 Handle, LH (1) (No. 32 RG)
2 108 942 Screw, 1/4-20 x 1-1/4 (4)
3 191 164 Bottle Support (1)
4 Existing Screw, 1/4-20 x 1/2slffmg
5 168 663 Hook Spring, Snap (3)
6 602 387 Chain (2)
7 191 158 Bottle Tray (1)
8 121 614 Retaining Ring (2)
9 163 463 Wheel, 10 in (2)
10 602 250 Washer, 3/4 flat (4)
11 191 167 Axle (1)
12 168 247 Caster, Swivel 5 in (2)
13 191 163 Caster Mounting Bracket (1)
14 167 788 Nut, 3/8-16 wshr (8)
15 601 965 Screw, 3/8-16 x 1 (12)
16 191 165 Handle, RH (1) (No. 28 RG)
16 204 296 Handle, RH (1) (No. 32 RG)
Be sure to provide Model when ordering
replacement parts.
8
9
10
Remove paint from axle grooves (11)
before installing retaining rings (8).
Optional
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Route hoses and
cords as shown to
prevent damage
and shock hazards.
11
Remove and discard
the four end caps and
eight screws before
installing caster bracket
(13) and bottle tray (7).
Remove and retain existing hardware
(4) before installing handles (1) and
bottle support (3).
Use hardware re-
tained from handle
installation to install
caster mounting
bracket (13) to base
of power source.
Use the four supplied screws (4) to
install bottle tray (7) to the welding
power source base
15
  • Page 1 1

Miller KJ29 Owner's manual

Miller
Brand
Miller
Model
KJ29
Type
Owner's manual
This manual is also suitable for

Miller KJ29 is a versatile running gear designed to enhance the portability and functionality of your welding power source. It features sturdy construction, ensuring stability and durability. The running gear includes two 10-inch wheels for smooth maneuvering, providing ease of movement even on rough surfaces. Additionally, it comes equipped with a bottle support for securing gas cylinders, keeping them稳固and organized.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents