Grizzly T1247 Owner's manual

Brand: Grizzly

Model: T1247

Type: Owner's manual

Grizzly T1247: This is a versatile and precise angle table with a swivel base, suitable for a wide range of applications. It is commonly used for inspection and layout of workpieces, as well as for precision operations such as boring, drilling, grinding, and milling. The T1247 comes fully assembled and features a durable construction with a 7" x 5" table size that provides ample workspace. Its angle and rotary scales are graduated in precise 1-degree increments, enabling accurate adjustments and measurements.

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T1247

7" x 5" ANGLE TABLE

W/SWIVEL BASE

INSTRUCTIONS

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 02/18) #TK19591 PRINTED IN CHINA

V1.04.18

Figure 1. Model T1247 controls and

components.

Crank

Handle

Tilt

Angle

Scale

T-Slots

Swivel

Lock Nut

(1 of 2)

Swivel

Angle

Scale

Mounting

Slot

(1 of 2)

Tilt Lock

Bolt

(1 of 2)

Lubrication & Maintenance

1. Lubricate all moving parts frequently with

light machine oil.

2. Wipe a thin layer of general purpose oil on

table and other non-painted surfaces when

not in use to help prevent rust.

The Model T1247 requires minimal care for proper

operation. Use a shop rag or stiff brush and min-

eral spirits to remove milling debris before lubri-

cating table.

Items Needed Qty

T26685 or ISO32 Equivalent Oil........ As Needed

Mineral Spirits .................................... As Needed

Shop Rags ......................................... As Needed

Stiff Clean Brush ............................................... 1

To maintain and lubricate T1247:

3. Change swivel angle by loosening (2) swivel

lock nuts (see Figure 1) and rotating angle

table by hand. Tighten lock nuts when adjust-

ment is complete.

The Model T1247 Angle Table with Swivel Base is

used for inspection and layout jobs, as well as for

boring, drilling, grinding, and milling operations.

It comes fully assembled. The angle and rotary

scales are graduated in 1˚ increments. All three

T-slots are

⁄8", and the table size is 7" x 5". The

crank handle fits on either side of the table.

Introduction

Setup & Operation

The Model T1247 has two mounting slots in its

base. Use suitable T-bolts and fasteners or acces-

sory clamps to attach the Model T1247 to a milling

machine table.

Items Needed Qty

T-Bolts (Size Varies, Not Included) .................... 2

Hex Nuts (Size Varies, Not Included) ................ 2

Flat Washers (Size Varies, Not Included) .......... 2

Accessory Clamps (Not Included) ..................... 2

Open-End Wrench

⁄8" ....................................... 1

To set up and operate T1247:

1. Secure Model T1247 to milling machine table

with suitable fasteners or accessory clamps

using the two mounting slots (see Figure 1).

2. Adjust table angle by loosening (2) tilt

lock bolts and turning crank handle

(see Figure 1). Tighten lock bolts when angle

adjustment is complete.

Wear safety glasses during

the entire setup and opera-

tion process!

-2-

T1247 Angle Table w/Swivel Base (Mfd. 02/18)

T1247 Parts Breakdown

REF PART # DESCRIPTION REF PART # DESCRIPTION

1 PT1247001 TABLE 10 PT1247010 FLAT WASHER 10MM

2 PT1247002 BEARING BLOCK 11 PT1247011 HEX NUT M10-1.5

3 PT1247003 HEX BOLT M6-1 X 18 12 PT1247012 FLAT WASHER 10MM

4 PT1247004 BALL BEARING 6001ZZ 13 PT1247013 HEX BOLT M10-1.5 X 30

5 PT1247005 WORM GEAR SHAFT 14 PT1247014 CONNECTING BASE

6 PT1247006 CRANK HANDLE 15 PT1247015 HEX BOLT M10-1.5 X 30

7 PT1247007 SWIVEL PIN 16 PT1247016 CURVED CLAMPING BLOCK

8 PT1247008 SWIVEL BASE 17 PT1247017 ANGLE BASE

9 PT1247009 T-BOLT M10-1.5 X 30 18 PT1247018 ANGLE SCALE

Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here

are available for purchase. Call (800) 523-4777 or visit our online parts store at www.grizzly.com to check for availability.

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

Grizzly T1247 Owner's manual

Grizzly T1247 Owner's manual

Grizzly T1247 Owner's manual

Related papers