Grizzly T27946 Owner's manual

Brand: Grizzly

Model: T27946

Type: Owner's manual

Grizzly T27946 is a 4-Drawer Rolling Tool Cabinet that provides ample storage space for your tools and equipment. Its sturdy construction ensures durability, while its smooth-rolling casters allow for easy mobility. With a weight capacity of up to 800 lbs, this cabinet can handle even the heaviest of tools. The individual drawers can hold up to 200 lbs each, providing ample space for organizing and storing your tools. The locking mechanism ensures the safety of your tools, while the included keys provide convenient access.

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T27946

4-DRAWER ROLLING

TOOL CABINET

INSTRUCTIONS

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 05/17) #JH18537 PRINTED IN CHINA

Introduction

The Model T27946 4-Drawer Rolling Tool Cabinet

requires some assembly. Follow the instructions

below for assembly, operation, and maintenance.

Inventory Qty

• Tool Cabinet with Drawers ........................... 1

• Keys ............................................................. 2

• Fixed Casters .............................................. 2

• Swivel Casters w/Brake ............................... 2

• Slot Head Screws M8-1.25 x 12 ................ 16

• Flat Washers 8mm .................................... 16

• Lock Washers 8mm ................................... 16

Figure 1. Model T27946.

• To reduce risk of crushing injuries from

tool cabinet tipping over on you:

— Do not stand on cabinet or in drawers.

— Only open one drawer at a time.

— Only move or transport cabinet with all

drawers closed and locked.

• Do not exceed weight capacities:

— Max individual drawer weight limit

is 200 lbs.

— Max total tool cabinet weight limit

(including contents) is 800 lbs.

• To prevent accidental rolling, always lock

caster brakes after moving cabinet.

• Do not allow children to have unsupervised

access to cabinet.

V2.05.17

Assembly

The Model T27946 comes with two fixed casters

and two swivel casters with brakes.

To install casters:

1. With help from another person, lay cabinet

upside down on floor (see Figure 2).

Note: We recommend sweeping the floor

clean and laying down a piece of cardboard

or a blanket to prevent scratching the finish

during this step.

-2-

T27946 Tool Cabinet (Mfd. 05/17)

Maintenance

• Use a soft, clean cloth and soapy water (use

regular dish soap) to remove grease, dirt, or

oil. Do not use solvents or flammable clean-

ing liquids.

• Lubricate drawer slides as needed with dry

lubricant.

• Lubricate lock annually with graphite.

Removing & Installing Drawers

To remove a drawer:

1. Fully extend drawer and remove contents.

2. Push left locking tabs (see Figure 4) down

and hold, then pull right locking tabs up and

hold.

Note: Each drawer features two guides per

side.

3. Remove drawer from drawer slide, (see

Figure 4).

The drawers can be removed and re-installed if

necessary.

Figure 4. Location of drawer locking tabs.

Drawer

Runner

4. To re-install drawer, extend drawer slides out

all the way, insert drawer runners into slides,

and close drawer entirely. Locking tabs will

click in place as drawer is closed, which will

fully attach drawer to slides.

Locking Drawers

Use the included keys to secure the drawers.

Drawers will only lock when completely closed.

Locking Tabs

Locking Caster

Two casters can be locked to keep tool cabinet

from moving.

To lock caster, press down on caster lock tab (see

Figure 3). To unlock caster, press down on caster

unlock tab.

Figure 3. Location and operation of caster lock

(1 of 2).

Caster Lock

Lock Tab

Unlock

Tab

2. Attach each caster using (4) M8-1.25 x 12

slot head screws, (4) 8mm flat washers, and

(4) 8mm lock washers (see Figure 2).

Ensure swivel casters with brake are mount-

ed on the same short side of the cabinet, and

fixed casters are mounted on opposite side,

then return cabinet to upright position.

Figure 2. Installing caster wheels on base.

T27946 Tool Cabinet (Mfd. 05/17)

-3-

Parts Breakdown & List

2V2

REF PART # DESCRIPTION REF PART # DESCRIPTION

1 PT27946001 CABINET BODY 10 PT27946010 LOCK W/2 KEYS

2V2 PT27946002V2 CASTER, LOCKING V2.05.17 11 PT27946011 TOUCH-UP PAINT, GLOSSY BLACK

3 PT27946003 DRAWER SLIDE 20" 12 PT27946012 TOUCH-UP PAINT, RED

4 PT27946004 DRAWER 6" 13 PT27946013 WARNING LABEL

5 PT27946005 DRAWER HANDLE 14 PT27946014 QR CODE LABEL

6 PT27946006 DRAWER HANDLE CAP 15 PT27946015 GRIZZLY.COM LABEL, GOLD

7 PT27946007 DRAWER LINER 16 PT27946016 SLOT HD SCR M8-1.25 X 20

8 PT27946008 FLAT HD SCR M4-.7 X 8 17 PT27946017 LOCK WASHER 8MM

9 PT27946009 CASTER, NON-LOCKING 18 PT27946018 FLAT WASHER 8MM

Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here

are available for purchase. Call (800) 523-4777 or visit our online parts store at www.grizzly.com to check for availability.

Grizzly Cabinet Series

T27947

T27952

T27951

T27948

T27953

T27950T27949

The T27946 4-Drawer Rolling Tool Cabinet is part of our heavy-duty 10-piece storage set. These modular

cabinets will enhance storage and workspace in the shop or garage, and they can be mixed and matched

to create a variety of storage solutions.

Grizzly T27946 Owner's manual

Grizzly T27946 Owner's manual

Grizzly T27946 Owner's manual

Related papers

Other documents