LG XBOOM GO PL5 Owner's manual

Type
Owner's manual

This manual is also suitable for

OWNER’S MANUAL
High Power
Speaker System
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
FJ5
*MFL70040803*
www.lg.com
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
NOTICE: For safety marking information including
product identication and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
Getting Started 3
Getting Started
1
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specication page of this owner’s manual
to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or re. Periodically
examine the cord of your device, and if its appearance
indicates damage or deterioration, unplug it,
discontinue use of the device, and have the cord
replaced with an exact replacement part by an
authorized service center. Protect the power cord
from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the device.
This device is equipped with a portable battery or
accumulator.
How to Safely remove the battery or the battery
pack from the equipment: To remove the old
battery or battery pack, follow the assembly steps
in reverse order. To prevent contamination of the
environment and bring on possible threat to human
and animal health, the old battery or the battery
put it in the appropriate container at designated
collection points. Do not dispose of batteries
or battery pack together with other waste. It is
recommended that you use local, free reimbursement
systems batteries and accumulators. The battery
shall not be exposed to excessive heat such as
sunshine, re or the like.
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
Symbols
~
Refers to alternating current (AC).
0
Refers to direct current (DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
Table of Contents4
Table of Contents
1 Getting Started
2 Safety Information
6 Unique Features
7 Playable file Requirement
7 Music file requirement
7 Compatible USB Devices
7 USB device requirement
8 Remote control
10 Top panel
11 Front panel / Rear panel
12 How to place the unit
2 Connecting
13 AC Power Cord Connection
14 Optional Equipment Connection
14 AUX IN Connection
14 Listening to music from your external device
14 USB Connection
3 Operating
15 Basic Operations
15 USB Operations
16 Selecting a folder and an MP3/WMA file
17 Deleting a file/folder or format
18 Using BLUETOOTH® wireless technology
18 Listening to music stored on the Bluetooth
devices
21 Using the Music Flow Bluetooth App
21 About “Music Flow Bluetooth” App
21 Install “Music Flow Bluetooth” App onto
Your Bluetooth Device
22 Activate Bluetooth with “Music Flow
Bluetooth” App
23 Sound adjustment
23 Setting the sound mode
24 JUKE BOX Playback
25 Other Operations
25 Turn off the sound temporarily
25 Displaying file information
(ID3 TAG)
25 DEMO
26 Using Microphone
28 LIGHTING
28 Auto power down
29 AUTO POWER On
29 Auto function change
30 LG Sound Sync
31 WIRELESS PARTY LINK Connection
Table of Contents 5
1
2
3
4
5
4 Troubleshooting
32 Troubleshooting
5 Appendix
33 General specifications
34 Trademarks and Licenses
34 Maintenance
34 Handling the Unit
Getting Started6
Getting Started
1
Unique Features
BLUETOOTH®
Listens to music stored on your Bluetooth device.
Music Flow Bluetooth
Music Flow Bluetooth is an app designed to let you
take control of some of LG’s latest audio devices.
(Page 21)
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync. (Page 30)
Getting Started 7
Getting Started
1
Playable file
Requirement
Music file requirement
MP3/WMA le compatibility with this unit is limited
as follows.
y Sampling frequency: within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
y Bit rate: within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
y Maximum les : 2,000
y Maximum folders : 200
y File extensions: “.mp3”/ “.wma”
y Certain MP3/WMA les may not be played
depending on the type or format of the le.
Compatible USB Devices
y MP3 Player: Flash type MP3 player.
y USB Flash Drive:
Devices that support USB2.0 or USB1.1.
y The USB function of this unit does not support all
USB devices.
USB device requirement
y Devices which require additional program
installation when you have connected it to a
computer, are not supported.
y Do not extract the USB device while in operation.
y For a large capacity USB, it may take longer than a
few minute to be searched.
y To prevent data loss, back up all data.
y If you use a USB extension cable or USB hub, the
USB device is not recognized.
y Using NTFS le system is not supported. (Only FAT
(16/ 32) le system is supported.)
y This unit recognizes up to 2,000 les.
y External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
y USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
y Some USB may not work with this unit.
Getting Started8
Getting Started
1
Remote control
Replacement of battery
Remove the battery cover on the rear of the remote
control, and insert the battery with 4 and 5
matched correctly.
• • • • • • • • • • • • • • a • • • • • • • • • • • • •
1 (Standby): Turns the power on or off.
F (Function): Selects the function and input source.
Input source / Function Display
USB USB
AUX input AUX
Bluetooth BT
LG Sound Sync (Wireless) LG TV
VOL (Volume) +/- : Adjusts speaker volume.
(Mute): Mutes the sound.
SOUND EFFECT: Chooses sound impressions.
FOLDER W/S: Searches for a folder of MP3/WMA
les. When a USB containing MP3/WMA les in
several folders is being played, press FOLDER W/S
to select the folder you want to play.
Getting Started 9
Getting Started
1
• • • • • • • • • • • • • • b • • • • • • • • • • • • •
C/V (Skip/Search):
- Skips backward or forward.
- Searches for a section within a le.
N (Play/Pause): Starts or pauses playback.
REPEAT: Listens to your les repeatedly or randomly.
INFO:
- Sees information about your music. An MP3 le
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time infor mation.
- Sees Bluetooth device name of the unit in BT
READY.
- Sees the name of connected all Bluetooth device
in Bluetooth mode.
- In status of WIRELESS PARTY LINK connection,
device name of SLAVE (Secondary) unit appears
in the MASTER (Primary) unit and device name
of MASTER (Primary) unit appears in the SLAVE
(Secondary) unit.
JUKEBOX:
- Selects JUKE BOX mode. (Page 24)
- Makes JUKE BOX list.
LIGHTING: Selects the lighting effects.
VOCAL EFFECTS: Selects various voice lters (vocal
effects) mode.
DELETE:
- Deletes MP3/WMA les. (Page 17)
- Deletes a song on the JUKE BOX list.
Getting Started10
Getting Started
1
Top panel
a USB Port
You can play sound les by connecting the USB
device.
b
1 (Standby)
Turns the power on or off.
KEY CHANGER
Changes the key to suit your vocal range.
VOICE CANCELLER
You can reduce the vocal tones during music
playback from various input sources.
ECHO/DEMO
- Selects ECHO mode.
- In power off status, if you press ECHO/DEMO,
shows DEMO mode.
c
LIGHTING
Selects the lighting effects.
d
MIC (Microphone) VOL. (Volume)
Select to adjust microphone volume.
(Adjust microphone volume by rotating
MASTER VOLUME / MULTI JOG.)
e
VOCAL EFFECTS
Selects voice filters (vocal effects) mode.
f BASS BLAST
Press to select BASS effect directly.
g MASTER VOLUME / MULTI JOG
- Adjust speaker volume.
- Adjust microphone volume.
- Selects lighting mode.
- Selects voice filters (vocal effects) mode.
h
F (Function)
Selects the function and input source.
Input source / Function Display
USB USB
AUX input AUX
Bluetooth BT
LG Sound Sync (Wireless) LG TV
U (Skip/Search)
- Skips forward.
- Searches for a section within a le.
T (Play/Pause)
Starts or pauses playback.
Y (Skip/Search)
- Skips backward.
- Searches for a section within a le.
WIRELESS LINK
- Selects MASTER (Primary) or SLAVE
(Secondary) on WIRELESS PARTY LINK mode.
- Enable or disable WIRELESS PARTY LINK mode.
i
Display window
a
b
c d e f
h
i
g
Getting Started 11
Getting Started
1
a MIC (Microphone) jack
b Remote sensor
AC IN
ANTENNA
AUX IN
L
R
c Handle
d AC IN socket
e AUX IN (L/R)
Connect an auxiliary device.
Front panel / Rear panel
a
d
e
b
c
Getting Started12
Getting Started
1
How to place the unit
Automatically optimize the sound
It helps automatically optimize the sound to suit the
installation conditions (Horizontal or Vertical).
If the installation method is changed
(‘Horizontal Vertical’ or ‘Vertical Horizontal’),
it is indicated by ‘VERTICAL MODE’ or ‘HORIZON
MODE’ in the display panel.
On the horizon mode, you can hear the stereo
sound and on the vertical mode, the sound
transforms into a mono signal.
,
Note
y Do not sit on the unit or push the unit.
Otherwise it may result in malfunction
and cause personal injury and/or property
damage.
y Do not place the unit in an unstable position.
Place the unit at a safe distance from a child’s
reach.
y Be careful so that the unit does not fall
down. Otherwise it may result in malfunction
and cause personal injury and/or property
damage.
y Watch out for the foot when you lay the unit
in horizontally.
>
Caution
Vertical
Horizon
RightLeft
2 Connecting
Connecting 13
Connecting
2
AC Power Cord
Connection
1. Connect one end of the AC power cord (included)
to the AC IN socket.
AUX IN
L
R
2. Plug the other end into the wall outlet.
Unplug the AC power cord from the wall outlet
if you do not to use for an extended period of
time.
,
Note
Connecting14
Connecting
2
Optional Equipment
Connection
AUX IN Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN (L/R) connector.
DVD, Blu-ray player etc.
Audio cable
White
Red
Listening to music from your
external device
The unit can be used to play music from many types
of external devices.
1. Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1.
3. Press F to select AUX function.
4. Turn on the external device and start it playing.
USB Connection
Connect a USB device (or MP3 player, etc.) to the
USB port on the unit.
USB device
Removing the USB device from the unit :
1. Choose a different function.
2. Remove the USB device from the unit.
,
Note
3 Operating
Operating 15
Operating
3
Basic Operations
USB Operations
1. Connect the USB device to the USB port.
2. Select USB function by pressing F.
To Do this
Playback
Press N on the remote control or
T on the unit.
Pause
Press N on the remote control or
T on the unit during playback.
Searching
for a section
within a le
Press and hold C/V on the
remote control or Y/U on the
unit during playback and release it at
the point you want to listen to.
Skipping to
the next/
previous le
Press V on the remote control
or U on the unit to go to the
next le.
Playing less than 2 seconds, press
C on the remote control or Y
on the unit to go to the previous le.
Playing after 3 seconds, press C
on the remote control or Y on
the unit to go to the beginning of
the le.
Playing
repeatedly or
randomly
Press REPEAT on the remote
control repeatedly.
y The display changes in the following order.
USB
*RPT 1
RPT**DIR
RPT ALL
RANDOM
OFF
*RPT : Repeat
**DIR : Directory
y When you play JUKE BOX list, only RPT 1 and
RPT ALL are available.
y Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
,
Note
Operating16
Operating
3
Selecting a folder and
an MP3/WMA file
1. Press FOLDER W/S repeatedly
on the remote
control
until a desired folder appears.
2. Press
N
to play it. The first file of folder will be
played.
y USB Folders/Files are recognized as below.
y If there is no le in a folder, the folder will not
appear.
y Folders will be presented as the following
order;
ROOT
FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
y File will be played from $ le No.1 to $ le
No.14 one by one.
y Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
y *ROOT: The rst screen you can see when a
computer recognize the USB is “ROOT”.
,
Note
Operating 17
Operating
3
Deleting a file/folder or format
You can delete a le or folder on your USB or you can
format the USB.
1. Select USB function by pressing F.
2. - Deletes le: Select the le you want to delete
and select “DEL FILE” by pressing DELETE on
the remote control.
- Deletes folder: Select the folder you want to
delete and select “DEL DIR” by pressing DELETE
on the remote control.
- Formats USB: Select “FORMAT” by pressing
DELETE on the remote control to format the
USB device.
3. To delete file/folder or format, press and hold
DELETE on the remote control.
y Do not extract the USB device during
operation, (such as play, delete, etc.).
y Regular back up is recommended to prevent
data loss.
y The delete function may not be supported
according to the USB status. (lock, etc.)
>
Caution
Operating18
Operating
3
Using BLUETOOTH®
wireless technology
About Bluetooth
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges.
A mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
y Available Devices : Smart phone, MP3, Notebook,
etc.
y Version : 4.0
y Codec : SBC
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain proles.
This unit is compatible with following prole.
A2DP (Advanced Audio Distribution Prole)
Listening to music stored on the
Bluetooth devices
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make
sure the Bluetooth feature is activated on your
Bluetooth device. Refer to your Bluetooth devices
user guide. Once a pairing operation is performed, it
does not need to be performed again.
1. Turn on the unit.
When Bluetooth connection lock is activated,
you can search Bluetooth device in BT function.
,
Note
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG FJ5 (XX)”.
y XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see “LG FJ5 (08)
on your Bluetooth device.
y Depending on the Bluetooth device type,
some devices may have a different pairing
process. Enter the PIN code (0000) as
needed.
y You can connect this unit with up to 3
Bluetooth devices simultaneously using the
same method as described above, only in the
Bluetooth function.
y The multi pairing connection is only
supported on Android devices. (Multi pairing
connection may not be supported depending
on the connected device specications.)
y Removable/detachable Bluetooth devices
(Ex: Dongle etc.) will not support multi
pairing.
,
Note
Operating 19
Operating
3
3. When this unit is successfully connected with
your Bluetooth device, “PAIRED” appears on the
display window and change to Bluetooth device
name soon. Then “BT” will appear on the display
window.
y "PAIRED" will momentarily appear on the
display when you connect other devices for
multi pairing.
y If the device name is unavailable, “_” will be
displayed.
,
Note
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth devices user guide.
y When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance close.
However, it may not work well in certain
situations as described below:
- There is a obstacle between the unit and
the Bluetooth device.
- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
y You should connect your Bluetooth device to
this unit again when you restart it.
y Even if this unit connected up to 3 Bluetooth
devices in the Bluetooth mode, you can play
and control music by using only one of the
connected devices.
,
Note
Controls connected Bluetooth device
You can control connected Bluetooth device by the
unit; play, pause, stop, skip.
y Only Android OS and iOS is available to use
this function.
y This function may not be supported
depending on the Bluetooth device, or
operated differently.
,
Note
Bluetooth connection lock (BT LOCK)
You can limit Bluetooth connections to only
BT (Bluetooth) and LG TV function to prevent
unintended Bluetooth connections.
To turn this function On, press and hold N on
the remote control or T on the unit for about 5
seconds in BT (Bluetooth) function.
“BT LOCK” appears then you can limit Bluetooth
connections.
To turn off this function, press and hold N on
the remote control or T on the unit for about 5
seconds in BT (Bluetooth) function.
“BT UNLOCK” appears.
Operating20
Operating
3
y The sound may be interrupted when the
connection has interference from other
electronic devices.
y Depending on the type of the device, you may
not be able to use the Bluetooth function.
y You can enjoy wireless system using phone,
MP3, Notebook, etc.
y The more distance between the unit and
the Bluetooth device, the lower the sound
quality becomes.
y Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets too far from the unit.
y When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
y When a Bluetooth device is not connected,
“BT READY” appears on the display window.
y When you use the Bluetooth function,
adjust the volume to a proper level on the
Bluetooth device.
y If a Bluetooth device is connected when
using LG TV, LG TV is disconnected and the
Bluetooth device is connected.
y When you connect a Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
y The Bluetooth connection will be
disconnected when you change the
Bluetooth function to the others. In “Music
Flow Bluetooth” app connection, only
one device which you are playing keeps
Bluetooth connection. You can control the
Bluetooth device with this unit but you
cannot use sound output.
y When entering the Bluetooth function, this
unit automatically connects to Bluetooth
the last device which was connected. (Auto
connection may not be supported depending
on the connected device specications.)
,
Note
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35

LG XBOOM GO PL5 Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI