Snapper 63178 User manual

Snapper
Brand
Snapper
Model
63178
Type
User manual

This manual is also suitable for

Snapper 7063178 is a windshield kit designed for utility vehicles. It includes a welded muffler kit for improved performance and noise reduction. The kit includes all the necessary hardware for installation, including bolts, nuts, washers, and brackets. The windshield is made of durable materials to withstand outdoor elements and provide protection from wind, rain, and debris. The muffler kit helps to reduce noise and emissions, making the vehicle more environmentally friendly and quieter to operate.

Snapper 7063178 is a windshield kit designed for utility vehicles. It includes a welded muffler kit for improved performance and noise reduction. The kit includes all the necessary hardware for installation, including bolts, nuts, washers, and brackets. The windshield is made of durable materials to withstand outdoor elements and provide protection from wind, rain, and debris. The muffler kit helps to reduce noise and emissions, making the vehicle more environmentally friendly and quieter to operate.

Parts Manual fo
r
Revision 1,
WINDSHIELD KIT (UTILITY VEHICLE)
COPYRIGHT
©
2005
McDonough, GA, 30253 U.S.A.
TP 400-5030-1-AT-N
8/5/2005
Manual No. 7063178
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
MODEL
6317
8
706317
8
Table Of Content
s
TP 400-5030-1-AT-N
Manual No. 7063178WINDSHIELD KIT (UTILITY VEHICLE)
3
PAGE GROUP
4
Grounds Cruiser Windshield Kit w/Muffler
Grounds Cruiser Windshield Kit w/Muffler
TP 400-5030-1-AT-N
Manual No. 7063178 WINDSHIELD KIT (UTILITY VEHICLE)
4
Grounds Cruiser Windshield Kit w/Muffler
Footnotes:
TP 400-5030-1-AT-N
Manual No. 7063178WINDSHIELD KIT (UTILITY VEHICLE)
5
Part No Descri
p
tionItem Qt
y
Note
1 7073906 1 WINDSHIELD, Grounds Cruiser
2 7073907 1 BRACKET, LH Windshield Mount
3 7073908 1 BRACKET, RH Windshield Mount
4 7073909 1 BRACKET, Lower Windshield Frame
5 7073910 1 BRACKET, LH Windshield Frame
6 7073911 1 BRACKET, RH Windshield Frame
7 7073960 1 WIND GUARD, Rubber
8 7090986 20 BOLT, 1/4-20 x 1” Hex Flange Lock
9 7090596 11 BOLT, 1/4-20 x 5/8” Hex Flange Lock, GR5
10 7091603 27 NUT, 1/4-20 Hex Nyloc
11 7091584 4 NUT, 1/4-20 Hex Flange Lock, GR5
12 7091294 17 WASHER, 1/4” Flat
-- 7073976 1 INSTRUCTION SHEET, Windshield Kit not shown
-- 7063337 1 KIT, Welded Muffler, Utility Vehicle includes 3 items shown below
13 7075732 1 MUFFLER, Welded, Utility Vehicle Muffler comes with spark
arrestor, clamp and screw
installed.
14 7075739 1 GASKET, Kawasaki Exhaust
-- 7075733 1 INSTRUCTIONS, Welded Muffler, Utility Vehicle not shown
NOTE: Install muffler kit 63337 before operating machine with windshield.
Parts Manual fo
r
WINDSHIELD KIT (UTILITY VEHICLE)
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
Revision 1,
COPYRIGHT
©
2005
TP 400-5030-1-AT-N
8/5/2005
Manual No. 7063178
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
McDonough, GA, 30253 U.S.A.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Snapper 63178 User manual

Snapper
Brand
Snapper
Model
63178
Type
User manual
This manual is also suitable for

Snapper 7063178 is a windshield kit designed for utility vehicles. It includes a welded muffler kit for improved performance and noise reduction. The kit includes all the necessary hardware for installation, including bolts, nuts, washers, and brackets. The windshield is made of durable materials to withstand outdoor elements and provide protection from wind, rain, and debris. The muffler kit helps to reduce noise and emissions, making the vehicle more environmentally friendly and quieter to operate.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents