2. DigiTech
  3. RP360

DigiTech RP360, RP360 XP, RP360V-01, RP360XPV-01 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the DigiTech RP360 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INCLUDED ITEMS: •RP PROCESSOR •POWER SUPPLY •QUICK START GUIDE •SAFETY INSTRUCTION SHEET
Quick Start Guide
RP360 / RP360 XP
GUITAR MULTI-EFFECTS PROCESSOR
CONNECT
Amp 1 Amp 2
Guitar
Harman PS0913DC
Power Supply
Portable
Music Player
Headphones
Volume/Expression
Pedal (RP360 only)
Footswitch
Computer
Or
Optional
NOTE: Outputs can run in mono or stereo. Press the
SYSTEM BUTTON and set the OUTPUT MODE accordingly.
1
INCLUDED ITEMS: •RP PROCESSOR •POWER SUPPLY •QUICK START GUIDE •SAFETY INSTRUCTION SHEETDOWNLOAD THE OWNER’S MANUAL AT DIGITECH.COM
5036028-A
Quick Start Guide
50XXXX-A
Quick Start Guide
RP360 / RP360 XP
GUITAR MULTI-EFFECTS PROCESSOR
SELECT ENCODER
EDIT KNOBS
DOWN FOOTSWITCH
UP FOOTSWITCH
STORE BUTTON
DRUMS BUTTON
SYSTEM BUTTON
LOOPER FOOTSWITCH
TuNE
• Press and hold the UP and DOWN
FOOTSWITCHES to enter the tuner.
• Tune your guitar.
• Press any FOOTSWITCH to exit the
tuner.
SELECT
PRESET
• Press the UP or DOWN
FOOTSWITCH to navigate presets.
CuSTOMIZE
PRESET
• Press the SELECT ENCODER to
enter the Edit menu.
• Turn the SELECT ENCODER to
select the eect to edit.
• Press the SELECT ENCODER
repeatedly to navigate parameter
pages for the selected eect.
• Turn the EDIT KNOBS to edit the
on-screen parameters.
• Press the STORE BUTTON twice to
store the changes to a preset.
ACTIVATE
DRuMS
• Press the DRUMS BUTTON twice to
activate the built-in drums.
RECORD
LOOP
• Press the LOOPER FOOTSWITCH to
arm recording then start playing.
• Press the LOOPER FOOTSWITCH
again to start loop playback.
• Press the LOOPER FOOTSWITCH
again to add an overdub.
• Press the LOOPER FOOTSWITCH
twice to stop playback.
• Press and hold the LOOPER
FOOTSWITCH
to clear the loop.
2
3
4
5
6
/