White Mountain Hearth Renegade 40 Glass Removal Owner's manual

White Mountain Hearth
Brand
White Mountain Hearth
Model
Renegade 40 Glass Removal
Type
Owner's manual

This manual is also suitable for

34758-3-0317 Page 1Empire Comfort Systems Inc. • Belleville, IL
3. Use the Glass Latch Tool to grip the latch bar and pry
it over the Glass Frame hook anges. Tilt the Glass
Frame towards you and pull upwards to remove it from
the unit. (See Figure 3)
GLASS
LATCH
TOOL
GLASS
LATCH
(4 PLACES)
LA
TCH
LATCH
LATCH
Figure 3
1. The Glass Latch Tool is shipped with the unit attached
to the left-hand side. Un-screw the Glass Latch tool
from the unit. Replace screw removed after tool
removal. (See Figure 1)
GLASS LATCH TOOL
SHIPPED ATTACHED
TO UNIT
Figure 1
2. Lift barrier screen and pull towards you.
Figure 2
CAUTION
Glass clips are tightly sprung. If the latch tool slips off of the
latch while pulling, injury may occur. Ensure that the latch
tool is completely hooked around the glass latch before
trying to disengage the glass clips from the glass assembly.
GLASS FRAME REMOVAL
GAS-FIRED
  • Page 1 1

White Mountain Hearth Renegade 40 Glass Removal Owner's manual

White Mountain Hearth
Brand
White Mountain Hearth
Model
Renegade 40 Glass Removal
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents