2. Sony
  3. VRD-VC10

Sony VRD-VC10 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Sony VRD-VC10 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Quick Start Guide
Sony Corporation 2004 Printed in China
2-514-545-11 (1)
7819900950
Synchronized Recording
2
3
4
1
5 6
Press [STOP] to stop recording.
Recording is completed. Eject the
disc.
Turn on the drive and insert a disc.
Press [REC] to standby for
recording.
Eject button
When you start playback on the video
device, recording starts automatically.
Recording pauses automatically when you
stop playback on the video device.
Press [SYNC] to display “SYNC”
and press [INPUT SELECT] to
display “VIDEO.”
Connect a video camera or VCR.
If the connected device has an S VIDEO
jack, use an S video cable.
QUICK REFERENCE
Stop Recording
Press “STOP”
If DVD+R is used, DVDirect will ask “Finalize?”
when ejecting
S to select [Yes] c F
Note
Finalize disc makes it compatible with DVD players.
Finalized disc cannot be incrementally written.
Erase all contents of a disc. This function only works with
DVD+RW.
Resulting disc starts the playback upon insertion to a DVD
player.
Writes in chapter breaks at set time interval (5, 10, 15min,
none)
Note
Refer to Instruction manual for more information.
3 41 2
Manual Recording
5 6
Press [INPUT SELECT]
to display “VIDEO.”
Connect a video camera or VCR.
If the connected device has an S VIDEO
jack, use an S video cable.
Eject button
Turn on the drive and insert a disc. Set the video device to the
playback pause mode.
Press [STOP] to stop recording,
and stop playback on the video
device.
Recording is completed. Eject the
disc.
Start playback on the video
device, and press [REC] to
start recording.
Function
Finalize disc
Erase All
Auto Play
Auto Chaptering
Operation
Press F until “Finalize?” c S to select [Yes]
c F c S to select [Yes] c F
Press F until “Erase All?” c S to select [Yes]
c F c S to select [Yes] c F
Press F until “Auto Play?” c S to select [Yes]
c F
Press F until “Auto Chp” c S to select
desired time c F
Start Recording
Press “REC” to standby for incoming signal c start the source
(VCR etc.) When signal is detected recording starts.
Press “REC” c start the source (VCR etc.)
SYNC
ON
OFF
Legend
F FUNCTION/ENTER button
S SELECT button
/