![](//vs1.manuzoid.com/store/data-gzf/51af2a5a0bd5ffd88634c2b32e31060f/2/000772611.htmlex.zip/bg2.jpg)
QUICK REFERENCE
Stop Recording
Press “STOP”
If DVD+R is used, DVDirect will ask “Finalize?”
when ejecting
S to select [Yes] c F
Note
Finalize disc makes it compatible with DVD players.
Finalized disc cannot be incrementally written.
Erase all contents of a disc. This function only works with
DVD+RW.
Resulting disc starts the playback upon insertion to a DVD
player.
Writes in chapter breaks at set time interval (5, 10, 15min,
none)
Note
Refer to Instruction manual for more information.
3 41 2
Manual Recording
5 6
Press [INPUT SELECT]
to display “VIDEO.”
Connect a video camera or VCR.
If the connected device has an S VIDEO
jack, use an S video cable.
Eject button
Turn on the drive and insert a disc. Set the video device to the
playback pause mode.
Press [STOP] to stop recording,
and stop playback on the video
device.
Recording is completed. Eject the
disc.
Start playback on the video
device, and press [REC] to
start recording.
Function
Finalize disc
Erase All
Auto Play
Auto Chaptering
Operation
Press F until “Finalize?” c S to select [Yes]
c F c S to select [Yes] c F
Press F until “Erase All?” c S to select [Yes]
c F c S to select [Yes] c F
Press F until “Auto Play?” c S to select [Yes]
c F
Press F until “Auto Chp” c S to select
desired time c F
Start Recording
Press “REC” to standby for incoming signal c start the source
(VCR etc.) When signal is detected recording starts.
Press “REC” c start the source (VCR etc.)
SYNC
ON
OFF
Legend
F FUNCTION/ENTER button
S SELECT button