Omega OM-90 Series Owner's manual

OM-90 SERIES

Portable Temperature and

Humidity Data Loggers

e-mail: [email protected]

For latest product manuals:

www.omegamanual.info

Shop online at

omega.com

For complete product manual:

www.omega.com/manuals/manualpdf/M5440.pdf

Revision 1.0.4 Page 2

OM‐90SeriesDataLoggers

QuickReferenceGuide

(ModelsOM‐91&OM‐92)

Description

TheOM‐90Seriesareportable,batteryoperated,temperature

andhumiditydataloggersabletostore65,520samplesofboth

temperatureandhumidityalongwithatimestamp.Thedata

loggerrunsoffofaCR2450coincellba tterythatenablesitto

runforover4years.

ThisQuickReference

Guidegetsyoustartedwiththelogger

withthemostbasicfunctionstohaveyouupandrunningwith

yourloggerinamatterofminutes.

TheOM‐90Seriestodaycomesintwoversions;OM‐91isa

temperatureonlyversionandOM‐92isatemperatureand

humidity

logger.Thisquickreferenceguideappliesforboth

versions.

BatteryInstallation

Thedataloggerrunsfromastandardcoincellbattery.WerecommendaCR2450620mAHCoincellbattery.

TherearedifferentmanufacturersbutagoodoneisPanasonicCR‐2450/G1AN.Youcanfinditeasilyonthe

webfromdifferentplacessuchaswww.digikey.comandwww2.mouser.com.Thekeythingisto

choosea

CR2450batterywithhighcapacitysincethiswilltranslateintoalongerloggerbatterylife.

Firstremovethedataloggercoverbyunscrewingthetwofastenerscrews(#1Philips)attherearofthe

logger.



Revision 1.0.4 Page 3

Thenremovethecircuitboardfromthebox(usesofttoolorfingernailtoremove)



Insertanewbatteryasshownbeingcarefulnottotouchandexposedelectronicsintheprocess.

Finallyre‐attachthecoverandtightenthefastenerscrewsagain(becarefulnottoovertighten).



ConnectingtoaDataLogger

ToconfigureorretrievedatafromaloggeryouwillneedaWindowsPCrunningWindowsXP,Windows

Vista,Windows7orWindows8.ConnectthedataloggertoyourPCusingtheprovidedUSBcable.AnyUSB

portonthePCcanbeused.



Revision 1.0.4 Page 4



ConfiguringaDataLogger

InstallationoftheOmegaOM‐90SeriesDataLoggerSoftwareisverysimple.Thedataloggerneedsno

specialdriverssinceitisaUSBHIDdeviceandsuchdevicescanmakeuseofthestandarddriversthatcome

withWindows.



IntheWindowsStartMenulaunchtheOmegaPC

Application.



ThefrontpageoftheGUIisanoverviewofthelogger.PresstheConfigurationbuttontogettothenext

page.

Revision 1.0.4 Page 5

Connecttheloggerandyouwillseetheconnectedindicationchangestoblue.



Nextfillouttheconfigurationsettings.Forexample:‐



Cor

F

 loggingstartto"OnDisconnection"

 loggingintervaltosay10seconds

 temperaturealarmenabledandthresholdsset

 humidityalarmsenabledandthresholdsset



Pressthe“ConfigureButton”sothatthesettingsareupdatedinyourlogger.Pleasewaituntilthesoftware

hasfinishedupdatingthe

logger.

Disconnectthelogger.Youshouldseethatloggingwillstartautomaticallyindicatedbya1secondgreen

light.Thegreenlightwillthenflashevery6secondstoindicatethattheunitislogging.Theredlightwill

flashalsointhecasethatthetemperatureorhumiditygoesoutside

oftheallowedlimitsandtriggersthe

alarms.

Iftheloggerbecomesfullthenalllightswillstopflashing.



Revision 1.0.4 Page 6

RetrievingData

Connectyourdatalogger.Theloggerredlightwillilluminatefor1secondindicatingloggingisstopping.

StarttheOM‐90SeriesDataLoggerSoftwareandnavigatetotheConfigurationpage.

Press"ReadLoggerConfiguration/Data"toretrievetheconfigurationanddatafromtheconnectedlogger.

Waituntilallinformationisretrieved

fromthelogger.



Thegraphandspreadsheetwillbefilledwiththeloggeddata.

Zoominginandoutofthegraphscanbeachievedbythefollowingcontrols:

• toZoomIn‐dragtheleftmousebutton

• toZoomOut‐clicktherightmousebutton

• whenzoomed

inyoucanmovearoundusingthe key‐boardarrowsorthemousescrollwheel



Towritedataandconfigurationtofile,pressthesaveicon.



Revision 1.0.4 Page 7

MoreAdvancedTopics

Thisdocumenthasshownthemostbasicwaytoconfigurethedataloggerinorderforyoutogetstarted

veryquickly.

Thereareforexampleotherloggerstartmodessuchasbuttonpress,startatadefinedtimeandrealtime

logging.ForamoreexhaustivedescriptionofallfeaturesoftheloggerthenpleaseconsultthefullOM‐90

SeriesUserGuideincludedontheCD. The software is also available on the OM-90 web page for download.

ProductSupport

FortechnicalsupportquestionspleasecontactOmegaat:

1‐800‐USA‐WHEN(1‐800‐872‐9436)

orviaemailto[email protected]

WARRANTY/DISCLAIMER

OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months

from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product

warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.

If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an

Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to

be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANTY does not apply to defects resulting from any action

of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper

repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with or shows

evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration; improper specifica-

tion; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in which wear is not war-

ranted, include but are not limited to contact points, fuses, and triacs.

OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes respon-

sibility for any omissions or errors nor assumes liability for any damages that result from the use of its products

in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only that the parts

manufactured by the company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES

OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL

IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are

exclusive, and the total liability of OMEGA with respect to this order, whether based on contract, warranty, negli-

gence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which

liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.

CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10

CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any

Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way,

OMEGA assumes no responsibility as set forth in our basic WARRANTY / DISCLAIMER language, and, additionally, purchaser will

indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) in

such a manner.

FOR WARRANTY RETURNS, please have the following infor-

mation available BEFORE contacting OMEGA:

1. Purchase Order number under which the product was

PURCHASED,

2. Model and serial number of the product under warranty, and

3. Repair instructions and/or specific problems relative to the

product.

FOR NON-WARRANTY REPAIRS,

consult OMEGA for current

repair charges. Have the following information available BEFORE

contacting OMEGA:

1. Purchase Order number to cover the COST of the repair,

2. Model and serial number of the product, and

3. Repair instructions and/or specific problems relative to the

product.

OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and

engineering. OMEGA is a registered trademark of OMEGA ENGINEERING, INC.

medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.

RETURN REQUESTS / INQUIRIES

Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING ANY

PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER

SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the

outside of the return package and on any correspondence.

The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.

Servicing North America:

U.S.A. Omega Engineering, Inc.

Headquarters: Toll-Free: 1-800-826-6342 (USA & Canada only)

Customer Service: 1-800-622-2378 (USA & Canada only)

Engineering Service: 1-800-872-9436 (USA & Canada only)

Tel: (203) 359-1660 Fax: (203) 359-7700

e-mail: [email protected]

For Other Locations Visit omega.com/worldwide

omega.com [email protected]

The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the

right to alter specifications without notice.

MQS5440/1017

Omega OM-90 Series Owner's manual

Related papers