Lenco PA-90 User manual

1

Model: PA-90

User Manual Portable speaker with bluetooth, FM Radio and USB

Gebruikshandleiding Draagbare luidspreker met Bluetooth, FM-radio en USB

Bedienungsanleitung Tragbarer Lautsprecher mit Bluetooth, UKW-Radio und

USB

Mode d’emploi Enceinte portative avec Bluetooth, radio FM et USB

Manual del usuario Altavoz portátil con Bluetooth, radio FM y USB

Page is loading ...

3

English

PA-90

Dear customer,

Thank you for buying this Lenco product. Quality and usability is our top priority. In order

to let you fully enjoy this product, we have manufactured this product using high quality

standards, materials, components and care.

Safety Instructions

Read carefully before use

CAUTION - RISK OF ELECTRICAL SHOCK - DO NOT OPEN

CAUTION: TO PREVENT AN ELECTRICAL SHOCK, DO NOT REMOVE

ANY COVER SCREWS. THERE ARE NO USER SERVICEABLE PARTS

INSIDE. REQUEST A QUALIFIED SERVICE PERSON TO PERFORM

SERVICING.

CAUTION:

Usage of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

This unit should not be adjusted or repaired by anyone except qualified service personnel.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.

2. Clean only with a slightly damp cloth.

3. Do not cover or block any ventilation openings. When placing the device on a shelf,

leave 5 cm (2") free space around the whole device.

4. Install in accordance with the supplied user manual.

5. Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs

and the cable’s exit point. Do not place heavy items on the power adaptor, which

may damage it. Keep the entire device out of children’s reach! When playing with

the power cable, they can seriously injure themselves.

6. Unplug this device during lightning storms or when unused for a long period.

7. Keep the device away from heat sources such as radiators, heaters, stoves, candles

and other heat-generating products.

8. Avoid using the device near strong magnetic fields.

9. Electrostatic discharge can disturb normal usage of this device. If so, simply reset

and restart the device following the instruction manual. During file transmission,

please handle with care and operate in a static-free environment.

4

10. Warning! Never insert an object into the product through the vents or openings. High

voltage flows through the product and inserting an object can cause electric shock

and/or short circuit internal parts. For the same reason, do not spill water or liquid on

the product.

11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near

swimming pools.

12. Do not use this device when condensation may occur.

13. Although this device is manufactured with the utmost care and checked several

times before leaving the factory, it is still possible that problems may occur, as with

all electrical appliances. If you notice smoke, an excessive build-up of heat or any

other unexpected phenomena, you should disconnect the plug from the main power

socket immediately.

14. This device must be well ventilated at all time!

15. This device must operate on a power source as specified on the specification label.

If you are not sure of the type of power supply used in your home, consult your

dealer or local power company.

16. The socket outlet must be installed near the equipment and must be easily accessible.

17. Do not overload ac outlets or extension cords. Overloading can cause fire or electric

shock.

18. Devices with class 1 construction should be connected to a main socket outlet with a

protective earthed connection.

19. Devices with class 2 construction do not require a earthed connection.

20. Keep away from rodents. Rodents enjoy biting on power cords.

21. Always hold the plug when pulling it out of the main supply socket. Do not pull the

power cord. This can cause a short circuit.

22. Avoid placing the device on any surfaces that may be subject to vibrations or shocks.

23. To protect the device during a thunderstorm, unplug the ac power adaptor.

24. When the device is not in use for long periods, unplug the ac power adaptor for

safety reasons.

25. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids.

To remove severe stains, you may use a damp cloth with dilute detergent.

26. The supplier is not responsible for damage or lost data caused by malfunction,

misuse, modification of the device or battery replacement.

27. Do not interrupt the connection when the device is formatting or transferring files.

Otherwise, data may be corrupted or lost.

28. The usb memory stick should be plugged into the unit directly. Don’t use an usb

extension cable because it can cause interference resulting in failing of data.

29. The apparatus shall not be exposed to dripping or splashing and make sure that no

objects filled with liquids, such as vases, are placed on or near the apparatus.

30. To completely disconnect the power input, the mains plug of the apparatus shall be

disconnected from the mains, as the disconnect device is the mains plug of apparatus.

5

31. The mains plug of the apparatus should not be obstructed or should be easily

accessed during intended use.

32. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

33. Minimum distance of 10cm around the apparatus is needed for sufficient ventilations.

34. The ventilation should not be impeded by covering the ventilation openings with

items such as newspapers, table-cloths, curtains etc.

35. No naked flame sources such as lighted candles should be placed on the apparatus.

36. Attention should be drawn to the environmental aspects of battery disposal.

37. The apparatus can only be used in moderate extremely cold or climates warm

environments should be avoided.

38. The rating label has been marked on the bottom panel of the apparatus.

39. This device is not intended for use by people (including children) with physical,

sensory or mental disabilities, or a lack of experience and knowledge, unless they’re

under supervision or have received instructions about the correct use of the device

by the person who is responsible for their safety.

40. This product is intended for household use only and not for commercial or industrial

use.

41. Make sure the unit is adjusted to a stable position. Damage caused by using this

product in an unstable position or by failure to follow any other warning or precaution

contained within this user manual will not be covered by warranty.

42. Never remove the casing of this apparatus.

43. Never place this apparatus on other electrical equipment.

44. Do not use or store this product in a place where it is subject to direct sunlight, heat,

excessive dust or vibration.

45. Do not clean this product with water or other liquids.

46. Do not block or cover the slots and holes in the product.

47. Do not push foreign objects into the slots or holes in the product.

48. Do not allow children access to plastic bags.

49. Please check that the voltage on the type plate of your appliance corresponds with

your house electricity supply (type plate is located on the back of the unit).

50. Protect the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

51. Only use attachments/accessories specified by the manufacturer.

52. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as the power supply cord or the plug,

when liquid has been spilled or objects have fallen into the apparatus, when the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

53. Do not use a damaged power cord or plug or a loose outlet. Doing so may result in

fire or electric shock.

6

Warning: prolonged exposure to loud sounds from personal music

players may lead to temporary or permanent hearing loss.

The USB memory stick should be plugged into the unit directly. Don’t use

an USB extension cable because it can cause interference resulting in

failing of data.

INSTALLATION

 Unpack all parts and remove protective material.

 Do not connect the unit to the mains before checking the mains voltage and before

all other connections have been made.

 Do not cover any vents and make sure that there is a space of several centimeters

around the unit for ventilation.

7

PART DESCRIPTIONS

1. HANDLE

2. RETRACTABLE HANDLE

3. RUGGEDIZED HOUSING

4. METAL MESH GRILL

5. POWER ON/OFF KEY

6. LINE IN

7. DC (15V, 2A ) INPUT

8. USB PORT

9. 1A CHARGER (5V)

10. MIC PORT1

11. MIC PORT2

12. WHEELS

13. POWER INDICATOR

14. BLUETOOTH INDICATOR

15. LED DISPLAY

16. BATTERY LOW INDICATOR

17. BATTERY FULL INDICATOR

18. LED LIGHT

19. ECHO (DOWN/UP)

20. MIC VOLUME (UP/DOWN) KEY

21. PAUSE/PLAY

(DISCONNECT) KEY

22. VOLUME (+/-) ROTATE

23. SOURCE/BT PAIR

24. TUNING DOWN/UP

25. REPEAT KEY/EQ KEY

26. LED LIGHT

13 14 15 16 17

181920

2122

23

24

2526

1

2

3

7

9

11

12

10

8

6

4

3

5

8

SAFETY INSTRUCTIONS

To ensure proper operation of the products and prevent fire or shock hazard, please

carefully read all information contained in these Safety instructions.

The lightning flash with

arrowhead symbol, within

an equilateral triangle, is

intended to alert the user

to the presence of

uninsulated "dangerous

voltage" within the

product's enclosure that

may be of sufficient

magnitude to constitute a

risk of electric shock to

persons.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TOREDUCE

THE RISK OF ELECTRIC

SHOCK, DONOT REMOVE

COVER (ORBACK). NO

USER-SERVICEABLE PART

SINSIDE. REFER

SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point

within an equilateral

triangle is intended to

alert the user to the

presence of important

operating and

maintenance (servicing)

instructions in the

literature accompanying

the appliance.

UNPACKING:

Check that all the following items should be included in the box.

- Main Unit

- AC Power Adaptor

- User Manual

POWER CONNECTION

- Unpack this product; ensure the power

ON/OFF switch is on "OFF".

- Connect the supplied AC adaptor to this

product; plug the AC adaptor to the wall

outlet.

- Battery GREEN LED indicator will turn to

RED.

POWER

LINE IN

DC JACK

USB Charge<1A

MIC 1

ON

OFF

MIC 2

wall outlet

9

BLUETOOTH CONNECTION

- Once the power switch is turned to "On", Bluetooth "BT" mode is set as default

- Blue LED indicator will flash in pairing mode. The RED LED display will show "bt"

- Turn on the Bluetooth function on your device and search for "Lenco PA-90" then

press to connect.

- Connected sound signal will be heard and the

blue led connection indicator will stop blinking

and stay steady.

- Bluetooth connection is completed.

- Select the music from your Bluetooth device

and start playing.

- Hold the BT DISCONNECT (BT PAIR) key to

disconnect paired device and enter pairing

mode.

FM RADIO

- Press the "Source" Button and select Radio, the FM Radio Frequency will show on

the RED LED display.

- Hold play/pause key to auto search and store.

- Press and hold the TU or TU buttons for choosing the next stored available

station. Short press them to fine tune.

USB PORT

- Press the "Source" Button and select USB, USB will show on the RED LED display.

- Insert the USB stick.

- Select your favorate music by pressing

TU or TU .

- Press "REP" once to repeat the current

selected song.

- Press "REP" the 2

nd

time to repeat all

songs.

- Press "REP" the 3

rd

times to random

- Press "REP" again to turn repeat off.

If unit is playing on Bluetooth mode "BT and LINE", it will automatically

switch to USB mode once insert the USB stick.

Important: The USB port is intended for data transfer only; other devices cannot be

used with this USB connection. The use of USB extension cords is not

recommended

Bluetooth function

1

2

3

10

LINE IN

- Press the "Source" Button and select LINE,

LINE will show on the RED LED display.

- Plug in your 3.5mm cable into the LINE Input

on the side panel and the unit will enter into

LINE IN mode.

- You can connect any audio device that has

3.5mm audio output jack and playback any

audio from the connected device.

Recharging

- Unit comes with a battery indicator alert.

- If Battery Low LED flash, it means the battery

level is low and recharging is required.

- By connecting the AC power, the Battery Full

LED will turn RED, it means the unit is under

recharging.

- The Battery Full LED become green, it means

the level of battery is fully charged.

It is recommended to charge the battery

about 6 hours before you start using the

unit for the first time.

Caution: To keep and protect the

rechargeable battery in good condition, users

should check the unit and be sure to turn the

Power On/Off switch on the side panel to

"Off" every time after using and before

storage, it is highly recommended that users

should fully recharge the battery at least

once in every two months.

POWER

LINE IN

DC JACK

USB Charge<1A

MIC 1

ON

OFF

MIC 2

wall outlet

POWER

LINE IN

DC JACK

USB Charge<1A

MIC 1

ON

OFF

MIC 2

11

SMART PHONES/TABLETS RECHARGING

- Smartphones recharging works on

both AC power and DC power.

CAUTION: When the low battery

red indicator lights up, that means

product needs to be recharged and

smartphones recharging can only

be done by AC power adaptor.

- Plug in the Power AC Adaptor to the

wall outlet.

- Plug in your smart phones/tablets

USB recharging cable into the side panel marked "1A charger".

- Connect the recharging cable to your smart phones/tablets. Recharging starts.

- Unplug your USB recharging cable when your smart phones/tablets are fully

recharged.

This jack is only designed for charging devices requiring 5V and 1A.

Otherwise it may lead to damage.

SING-A-SONG

- This product allows you to sing-a-long with

the songs are playing either on BT, USB or

LINE IN mode and allow 2 microphones at

the same time.

- Plug in your Microphone cable into the side

panel marked "MIC 1" and/or "MIC 2".

- Adjust the MIC Volume "MIC +/MIC -" or

main volume on the top control panel.

- Adjust the Echo level "ECHO +/ECHO -".

- Start to sing

WARNING: - If the MIC Volume and

ECHO level set too high or to the maximum, be caution with the high pitch

reflection tone.

SOUND EFFECTS

- "PA-90" has a built in Equalizer

- Press and select the preset sound effect for your music; FLAT, CLASSIC, POP,

ROCK and JAZZ

POWER

LINE IN

DC JACK

USB Charge<1A

MIC 1

ON

OFF

MIC 2

1

2

POWER

LINE IN

DC JACK

USB Charge<1A

MIC 1

ON

OFF

MIC 2

12

TROUBLESHOOTING

General

No power

- Check that AC power cord is securely inserted in the unit and the electrical outlet.

- Check the Power On/Off switch is turned to On position.

- If battery is flat Plug in the AC Power cord to charge and operate.

Keys no response

- Turn the Power On/Off switch to Off, wait one minute and then On again to reset the

unit.

- Unplug the AC Power cord and plug it back again.

No sound heard

- Make sure the LINE connected volume is turned to a reasonable level.

- Make sure the Bluetooth connected device output the audio via BT out.

- Make sure the Bluetooth connected device volume is turned to a reasonable level.

Bluetooth Operations

Audio quality is poor

- Bluetooth reception is poor. Move the Bluetooth device nearer to the Speaker.

Cannot pair to Bluetooth device

- Make sure both Bluetooth device and Speaker is not connected to any other

Bluetooth device.

- Make sure the Bluetooth On/Off switch located below Speaker is slide to On position.

- Make sure the Blue LED on the Speaker is fast flashing (Pairing mode).

- Turn Power switch to Off, and then On again, Press and hold BT button for

2 seconds to enter into pairing mode.

13

SPECIFICATIONS

General

Input Source:

Bluetooth/LINE/FM/USB

Power consumption:

40W

Bluetooth Range:

10M (33 feet)

LINE IN:

3.5mm

USB Playback:

Full Speed 2.0

USB Recharging:

1A

Control Buttons:

Power, Source, Bluetooth pairing, Volume Up/Down,

EQ, MIC (ECHO-/ECHO+), REP, LIGHT

LED Indicator:

Power (RED LED x 1)

Bluetooth (BLUE LED x 1)

Battery Level LED (RED LED x 1, GREEN LED x 1)

Battery:

Yes: 12V 5000MAH

Power Source:

DC 15V 2.0A

FREQ Range:

FM 87.5-108 MHz

Speaker Output Wattage:

60W (RMS)

Speaker Driver Size:

8" (Woofer) + 2" (Tweeter)

Speaker Grill:

Metal Speaker Grill

Full Range:

Yes

S/N:

> 50 dB

Cabinet Material:

Plastic

Dimension (W x H x D):

370 X 218 X496 (mm)

Weight (KG):

8.08KGS

Bluetooth

Bluetooth Version:

3.0 + EDR

Bluetooth Profile:

A2DP, AVRCP

Bluetooth Frequency Band:

2.402 GHz - 2.480 GHz

Bluetooth Range:

10 meters

About Sealed Lead-Acid Battery:

This unit works either on the battery pack (Model no.: Tianchang 6-FM-5A, 12V,

5000mAh) or the AC power: unplug the AC Power adapter from the DC input jack to

work on the battery pack (after fully charged); plugging the AC Power adapter while the

battery pack is attached initiates the charging of this battery. The charged LED indicator

lights red during charging, when the battery is fully charged the indicator is off. Fully

charging a run-out battery pack may take 8hours, A fully charged battery pack can

endure approximately 10 hours at 50% volume of continuous playback. This playing

time may vary with the surrounding environment, the volume level of the speaker and

the battery condition. It is advised that you wait 10-20 minutes before recharging the

battery pack if it has turned flat during operation.

14

Danger of explosion if battery is incorrectly replaced

15

Energy Saving:

To save enery the PA-90 will automatically go in stand-by mode when no music is

received during 20 minutes. To re-activate the speaker, move the Power switch to OFF,

wait for seconds and ON again.

This product operates at 2400 - 2483.5 MHz and is designated only to be used inside a

normal household environment. This product is suited for this purpose within all EU

counties.

Guarantee

Lenco offers service and warranty in accordance with the European law, which means

that in case of repairs (both during and after the warranty period) you should contact

your local dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non-official service center in any

way, the warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty

obligations of the manufacturer will be voided.

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some

of the instruction, specifications and pictures in this documentation may differ slightly

from your particular situation. All items described in this guide for illustration purposes

only and may not apply to particular situation. No legal right or entitlements may be

obtained from the description made in this manual.

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery

should not be disposed of as general household waste in Europe. To

ensure the correct waste treatment of the product and battery, please

dispose them in accordance to any applicable local laws of

requirement for disposal of electrical equipment or batteries. In so

doing, you will help to conserve natural resources and improve

standards of environmental protection in treatment and disposal of

electrical waste (Waste Electrical and Electronic Equipment

Directive).

Service

For more information and helpdesk support, please visit www.lenco.com

Lenco Benelux BV, Thermiekstraat 1a, 6361 HB, The Netherlands.

Page is loading ...

20

ONDERDEELBESCHRIJVING

1. HANDVAT

2. UITTREKBAAR HENDEL

3. ROBUUST UITGEVOERDE

BEHUIZING

4. METALEN ROOSTER

5. AAN-/UITTOETS

6. LIJNINGANG

7. DC-INGANG (15V, 2A )

8. USB-POORT

9. 1A LADER (5V)

10. MIC-POORT 1

11. MIC-POORT 2

12. WIELTJES

13. INDICATIELAMPJE AAN/UIT

14. BLUETOOTH-INDICATOR

15. LED-SCHERM

16. INDICATOR LAGE BATTERIJ

17. INDICATOR VOLLE BATTERIJ

18. LED-LICHT

19. ECHO (OMLAAG/OMHOOG)

20. MICROFOONVOLUME

(OMHOOG/OMLAAG)

21. PAUZE/START

(ONTKOPPELEN) TOETS

22. VOLUME (+/-) DRAAIEN

23. BRON/BT PARING

24. AFSTEMMEN OMHOOG/OMLAAG

25. HERHAALTOETS/EQ-TOETS

26. LED-LICHT

13 14 15 16 17

181920

2122

23

24

2526

1

2

3

7

9

11

12

10

8

6

4

3

5

Page is loading ...

47

DESCRIPTION DES PIÈCES

1. POIGNEE

2. POIGNEE ESCAMOTABLE

3. BOITIER ROBUSTE

4. GRILLE EN TREILLIS

MÉTALLIQUE

5. TOUCHE MARCHE/ARRET

6. ENTREE DE LIGNE

7. ENTREE CC (15V, 2A )

8. PORT USB

9. CHARGEUR DE 1 A (5 V)

10. PORT MICRO 1

11. PORT MICRO 2

12. ROULETTES

13. TÉMOIN D’ALIMENTATION

14. VOYANT BLUETOOTH

15. ÉCRAN LED

16. INDICATEUR DE BATTERIE FAIBLE

17. INDICATEUR DE BATTERIE PLEINE

18. ECLAIRAGE

19. ÉCHO (+/-)

20. TOUCHE DE VOLUME DU MICRO

(HAUT/BAS)

21. PAUSE/LECTURE

TOUCHE (DÉCONNECTER)

22. MOLETTE DU VOLUME (+/-)

23. SOURCE/APPARIEMENT BT

24. RÉGLAGE +/-

25. TOUCHE RÉPÉTER/ÉGALISEUR

26. ECLAIRAGE

13 14 15 16 17

181920

2122

23

24

2526

1

2

3

7

9

11

12

10

8

6

4

3

5

Page is loading ...

Lenco PA-90 User manual

Lenco PA-90 User manual

in other languages

Related papers

Other documents