Valor 714BPB Owner's manual

714 Backing Plate

INSTALLATION INSTRUCTIONS

Use with Valor 700 Models only

The 714 plate is intended to be used on Valor heater model 700 only. Mounting of the 714 does not affect

clearances or other specications listed in the heater installation manuals.

inner trims

sold separately

714BPB

Installation

1. Place backing plate behind engine and position

replace anges between plate legs.

2. Attach the plate to anges with 4 screws (2 per

side top/bottom).

The 714 backing plate can be used where necessary to

cover larger replace openings, it is compatible with all

optional inner trim kits.

42” (1067 mm) coverage

29” (737 mm) coverage

700 engine

Overview

Legend g3.5

4003410-02

Locate the plate

around the appliance

Secure from the

inside with 4

screws supplied

Page is loading ...

Download PDF