Axor 34010821 Installation guide

Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

Axor 34010821 is a versatile bathroom sink faucet that combines style and functionality. With its sleek design and durable construction, this faucet is a perfect addition to any modern bathroom. It features a single lever handle for effortless control of water flow and temperature, making it easy to find the perfect setting for your needs. The faucet also boasts a high spout that provides ample clearance for washing hands or filling containers. Additionally, the Axor 34010821 is equipped with a pop-up drain assembly for easy use and maintenance.

Axor 34010821 is a versatile bathroom sink faucet that combines style and functionality. With its sleek design and durable construction, this faucet is a perfect addition to any modern bathroom. It features a single lever handle for effortless control of water flow and temperature, making it easy to find the perfect setting for your needs. The faucet also boasts a high spout that provides ample clearance for washing hands or filling containers. Additionally, the Axor 34010821 is equipped with a pop-up drain assembly for easy use and maintenance.

Axor Citterio M
34010xx1
34016xx1
34017xx1
Axor Citterio M
34120xx1
34127xx1
Axor Citterio M
34210xx1
Installation Instructions / Warranty
3
*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater.
* Vous devez connaître et respecter tous les codes de plomberie locaux applicables pour le réglage de la température du
chauffe-eau.
*Debe conocer y cumplir todos los códigos locales aplicables para ajustar la temperatura del calentador de agua.
Recommended water
pressure
Pression d’eau recommandée Presión recomendada
en servicio
15 - 75 PSI
Max. water pressure Pression d’eau maximum Presión en servicio max. 145 PSI
Recommended hot
water temp.
Température recommandée
d'eau chaude
Temperatura recomen-
dada del agua caliente
120� - 140� F*
Max. hot water temp Température maximum d'eau
chaude
Temperatura del agua
caliente max.
176�F*
Flow rate - lavatory Capacité nominale - lavatory Caudal máximo
- lavatory
1.5 GPM
Flow rate - bidet Capacité nominale - bidet Caudal máximo - bidé 2.2 GPM
Hole size in mounting
surface
Dimension du trou dans la
surface de montage
Tamaño del orificio en
la superficie de montaje
1⅜"
Max. depth of mount-
ing surface
Profondeur maximale de la
surface de montage
Profundidad máxima de
la superficie de montaje
1⅝"
Technical Information / Données techniques / Datos tecnicos
34016xx1 34210xx1
4
À prendre en considération pour l’installation
Pour de meilleurs résultats, Hansgrohe re-
commande que ce produit soit installé par un
plombier professionnel licencié.
Veuillez lire attentivement ces instructions
avant de procéder à l’installation. Assurez-
vous de disposer de tous les outils et du
matériel nécessaires pour l’installation.
Pour empêcher des blessures par ébouil-
lantement, la température de sortie maximale
du robinet de douche ne doit pas excéder
120°F. Au Massachusetts, la température de
sortie maximale du robinet de douche ne doit
pas excéder 112°F.
Conservez ce livret et le reçu (ou une autre
preuve sur laquelle figurent la date et l’endroit
de l’achat) pour ce produit dans un endroit
sûr. Le reçu est requis si vous commandez des
pièces sous garantie.
Installation Considerations
For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
To prevent scald injury, the maximum output
temperature of the shower valve should be
no higher than 120°F. In Massachusetts, the
maximum output temperature of the shower
valve can be no higher than 112°F.
Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
Consideraciones para la instalación
Para obtener mejores resultados, la
instalación debe estar a cargo de un plomero
profesional matriculado.
Antes de comenzar la instalación, lea estas
instrucciones detenidamente. Asegúrese
de tener las herramientas y los insumos
necesarios para completar la instalación.
Para evitar escaldaduras, la máxima
temperatura de salida de la válvula de la
ducha no debe exceder los 120°F. En
Massachusetts, la máxima temperatura de
salida de la válvula de la ducha no debe
exceder los 112°F.
Mantenga este folleto y el recibo (u otro
comprobante del lugar y fecha de compra)
de este producto en lugar seguro. El recibo
se requiere en caso de ser necesario solicitar
piezas bajo garantía.
5
Replacement Parts / Pièces détachées / Repuestos
23x2
34093xx0
96762000
98863xx0
98864000
97685000
98865000
98866000
95382000
96923xx0
98987000
13961000
92036xx0
94005xx0
xx = colors / couleurs / acabados
00 = chrome
82 = brushed nickel
96321001 18"
96316001 35"
94159xx0
97592000
96100000
88623000
not included
non compris
no incluidos
6
English
Installation
Install the drain pull rod.
Place the faucet and sealing ring on the mounting
surface.
Install the fiber washer, metal washer and mount-
ing nut.
Tighten the mounting nut by hand.
Tighten the tensioning screws using a screwdriver.
8
English
Connect the supply hoses to the stops. Use two
wrenches as shown.
Do not allow the hoses to
twist.
Test the faucet. Check all connections for leaks.
10
English
Note: the temperatures given in the diagram
assume a water heater temperature of 140° F,
a cold water temperature of 50°F and a water
pressure of 45 PSI.
Replace the flange.
Replace the handle.
Tighten the handle screw.
Install the screw cover.
Set the High Temperature Limit
Stop (optional)
Use a 3 mm Allen wrench to push the screw cover
into the handle.
Use the 3mm Allen wrench to loosen the handle
screw 2 complete revolutions.
Remove the handle.
Retrieve the screw cover.
Remove the flange.
Remove the high temperature limit stop.
Replace the high temperature limit stop so that the
pin on the cartridge is in the desired slot on the
limit stop.
3 mm
2 x
12
English
Install the pop-up drain
Remove the plunger.
Unscrew the flange from the tee.
Unscrew the tailpiece from the tee.
Wrap the tailpiece threads with Teflon tape. Install
the tailpiece on the tee.
Install the sealing gasket on the flange.
Rest the flange in the sink outlet.
Install the mack gasket, friction ring and retainer
nut on the flange.
Install the tee and tailpiece on the flange.
Tighten the retainer nut.
Place the plunger in the drain.
Install the ball rod so that the end goes through
the loop in the bottom of the plunger.
Install and hand tighten the pivot ball nut.
Connect the swivel connector to the end of the
ball rod.
Connect the swivel connector to the end of the
pull rod.
Test the drain. Reposition the swivel connector if
necessary.
Tighten the swivel connector screws.
14
If the flow of water decreases over time, clean the aerator.
Si le débit d’eau diminue au fil du temps, retirez l'aérateur
et nettoyez-les.
Si el caudal de agua disminuye con el tiempo, lave el
aireador.
User Instructions / Instructions de service / Manejo
on
ouvert
abierto
off
fermé
cerrar
15
Cleaning Recommendation for Hansgrohe Products
Modern bathroom faucets, kitchen faucets and shower products are made from different materials to comply with the
needs of the market with regard to design and functionality. To avoid damage to the product, it is necessary to take
proper care of it.
For best results:
Prevent the buildup of mineral scale and /or soap residue by cleaning your Hansgrohe product(s) when
needed.
Select a cleaning agent specifically intended for the type of product.
Do not use these types of cleaners as they will cause damage to your Hansgrohe product:
Any cleaning agent containing hydrochloric acid, formic acid, lye, or acetic acid.
Abrasive cleaning powders, pads, or brushes.
Steam cleaners.
“No rinse” cleaning agents.
Always follow the instructions provided by the manufacturer of the cleaning agent.
Do not mix cleaning agents, unless directed by the manufacturer.
Do not spray cleaners directly onto the product as drops could enter openings and gaps and cause damage.
When using spray cleaners, spray the cleaner onto a soft cloth or sponge.
Always rinse your Hansgrohe product thoroughly with clear water and polish dry with a soft cloth after
cleaning.
Important
Residue from soaps and shampoos can cause damage. Rinse the product with clean water after each use.
Residue from basin/tub/tile cleaner can cause damage to faucets and fittings. Immediately rinse any
overspray from the Hansgrohe product.
Damage to the product caused by improper care or the use of improper cleaning agents is
not covered by the warranty.
If a component of the product is damaged, replace it, as there is risk of injury.
18
Limited Consumer Warranty
This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”).
This warranty is limited to Hansgrohe products that are purchased by a consumer in the United States or Canada
after March 1, 1996, and installed in either in the United States or in Canada.
WHO IS COVERED BY THE WARRANTY
This warranty extends to the original purchaser only. This warranty is non-transferable.
WHAT IS COVERED BY THE WARRANTY
The warranty covers only your Hansgrohe manufactured product. Hansgrohe warrants this product against defects in
material or workmanship as follows:
Hansgrohe will replace at no charge for parts only or, at its option, replace any product or part of the product that
proves defective because of improper workmanship and/or material, under normal installation, use, service and
maintenance. If Hansgrohe is unable to provide a replacement and repair is not practical or cannot be made in
timely fashion, Hansgrohe may elect to refund the purchase price in exchange for the return of the product.
LENGTH OF WARRANTY
Replacement or repaired parts of products will be covered for the term of this warranty, as stated in the following
two sentences. If you are a consumer who purchased the product for use primarily for personal, family or household
purposes, this warranty extends for as long as you own the product and the home in which the product is originally
installed. If you purchased the product for use primarily for any other purpose, including, without limitation, a
commercial purpose, this warranty extends only (i) for 1 year, with respect to Hansgrohe & Commercial products,
and (ii) for 5 years, with respect to Axor products.
THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR:
A. Conditions, malfunctions or damage not resulting from defects in material or workmanship.
B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper
maintenance, misuse, abuse, negligence, accident or alteration; (2) the use of abrasive or caustic cleaning agents
or “no-rinse” cleaning products, or the use of the product in any manner contrary to the product instructions; or (3)
conditions in the home such as excessive water pressure or corrosion.
C.Labor and other expenses for disconnection, deinstallation, or return of the product for warranty service
(including but not limited to proper packaging and shipping costs), or for installation or reinstallation of the
product.
D. Accessories, connected materials and products, or related products not manufactured by Hansgrohe.
E. Any Hansgrohe or Axor product sold for display purposes.
F. Rubbed Bronze finish is subject to a 3-year limited warranty. Chrome and all PVD finishes are covered by the
limited lifetime warranty.
G. Hansgrohe Water Filtration System is subject to a 1-year limited warranty. Warranty does not include
replacement filters.
TO OBTAIN WARRANTY PARTS OR INFORMATION
Contact your Hansgrohe retailer, or contact Technical Service at:
Hansgrohe, Inc.
1492 Bluegrass Lakes Parkway
Alpharetta, GA 30004
Toll-free 800-334-0455
In requesting warranty service, you will need to provide:
1. The sales receipt or other evidence of the date and place of purchase.
2. A description of the problem.
3. Delivery of the product or the defective part, postage prepaid and carefully packed and insured, to:
Hansgrohe, Inc.
1492 Bluegrass Lakes Parkway
Alpharetta, GA 30004
Toll-free 800-334-0455
19
When warranty service is completed, any repaired or replacement product or part will be returned to you postage
prepaid.
EXCLUSIONS AND LIMITATIONS
REPAIR OR REPLACEMENT (OR, IN LIMITED CIRCUMSTANCES, REFUND OF THE PURCHASE
PRICE) AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER.
HANSGROHE NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO CREATE FOR IT ANY
OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH THIS PRODUCT. HANSGROHE SHALL
NOT BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, ARISING OUT OF BREACH OF THIS WARRANTY OR ANY IMPLIED
WARRANTY (INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY).
Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation
or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights
that vary from state to state.
TO THE EXTENT PERMITTED BY LAW, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THE EXPRESS
WARRANTY.
Some states do not allow limitations on how long an implied warranty may last, so the above limitations may not
apply to you. You may be required by law to give us a reasonable opportunity to correct or cure any failure to
comply before you can bring any action in court against us under the Magnuson-Moss Warranty Act.
PRODUCT INSTRUCTIONS AND QUESTIONS
Upon purchase or prior to installation, please carefully inspect your Hansgrohe product for any damage or visible
defect. Prior to installing, always carefully study the enclosed instructions on the proper installation and the care and
maintenance of this product. If you have questions at any time about the use, installation or performance of your
Hansgrohe product, or this warranty, please write us or call us toll-free at 800-334-0455.
Hansgrohe, Inc. 1490 Bluegrass Lakes Parkway Alpharetta, GA 30004
Tel. 770-360-9880 Fax 770-360-9887
www.hansgrohe-usa.com
US - Installation Instructions Part No. 90438025 Revised 08/2011
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Axor 34010821 Installation guide

Category
Sanitary ware
Type
Installation guide
This manual is also suitable for

Axor 34010821 is a versatile bathroom sink faucet that combines style and functionality. With its sleek design and durable construction, this faucet is a perfect addition to any modern bathroom. It features a single lever handle for effortless control of water flow and temperature, making it easy to find the perfect setting for your needs. The faucet also boasts a high spout that provides ample clearance for washing hands or filling containers. Additionally, the Axor 34010821 is equipped with a pop-up drain assembly for easy use and maintenance.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI