LG VC4220NHTY Owner's manual

Page is loading ...

IMPORTANT SAFETY INSTRUCTIONS

4

Page is loading ...

3

Button

Attachment Point

Hose slide Type

Rotary Type

Connecting the hose to the vacuum cleaner

มุ่ป

นุ่ฝดูดยาสบยีสเงอ่ช

3

การต่อสายดูดฝุ่นเข้ ื่องดูดฝุ่นรคเวับตักา

Push the fitting pipe on the flexible hose into the attachment point

on the vacuum cleaner.

To remove the flexible hose from the vacuum cleaner, press the

button situated on the fitting pipe, then pull the fitting pipe out of the

vacuum cleaner.

นุ่ฝดูดงอ่ืรคเงอขยาสบยีสเงอ่ชบักา้ขเนุ่ฝดูดยาสอ่ต

ณวเิรบงรตมุ่ปดก้หใกออนุ่ฝดูดยาสดอถรากงอ้ตา้ถ

นุ่ฝดูดยาสงอขนบนา้ด งอ่ืรคเวัตกาจกอองึดะลแ

10

Page is loading ...

32

Park mode

2

Storage

3

• To store during vacuuming, for example

to move a small piece of furniture or a rug,

use park mode to support the flexible hose

and nozzle.

- Slide the hook on the nozzle into the slot

on the side of vacuum cleaner.

• When you have switched off and

unplugged the vacuum cleaner,

press the cord reel button to

automatically rewind the cord.

• You can store your vacuum cleaner

in a vertical position by sliding the

hook on the nozzle into the slot on

the underside of the vacuum cleaner.

ู่ยอนาง้ชใะณขบ็กเราก บ็กเราก

งัย่ีทะณขุ่ฝดูดงอ่ืรคเบ็กเรากน็ปเ

ู่ยอนาง้ชใ

- ่ีทปไา้ขเดูดวัหนบวย่ีกเ่ีทนอ่ืลเ

ปูรงัดนุ่ฝดูดงอ่ืรคเงอขงา้ขนา้ดงอ่ช

•

์ซติวสดิปนา่ทอ่ืมเ ถอดปลั๊ก และ

ว้ลแฟไยาสบ็กเ

้ดไนา่ทงอขนุ่ฝดูดงอ่ืรคเบ็กเถรามาสนา่ท

้ึขนุ่ฝดูดงอ่ืรคเง้ัตยดโ น และสอดท วย่ีกเ่ี

งอขงลนา้ดบยีสเงอ่ชงรตปไงลดูดวัหนบ

ปูรงัดนุ่ฝดูดงอ่ืรคเ

•

12

Page is loading ...

How to use Using the sani punch nozzle

Sani punch nozzle(depending on model)

Set the suction power control switch to MAX POWER before vacuuming.

Depending on the type of bedding, handling may be awkward or it may

cause a lot of noise.

If this is the case, adjust the suction power control switch to a lower setting.

This nozzle picks up even dust inside through beating.

The bottom part can be separated to be cleaned.

Since the bottom does not stick to the surface, vacuuming is easy.

Features

Follow the directions below for proper use.

Assembly

Connect the nozzle to the telescopic tube.

How to use

hcnuP inaS าฟซโะลแ นอน่ีทบัรหำสนุ่ฝรไดูดวัหนาง้ชใราก

)นุ่ระาพฉเ( hcnuP inaS าฟซโะลแ นอน่ีทบัรหำสนุ่ฝรไดูดวัห

19

วิธีการใช้งาน

When using on the bed

Lay out the blanket

and vacuum it on the bed

When using on the floor

It is easier to clean a light blanket or sheet

by pushing the nozzle in the direction of the arrow.

To increase cleaning efficiency for light blankets,

lay on top of a bulky blanket and then clean.

This sani punch nozzle is for effective cleaning of beds and blankets to remove mites and dust.

Effective cleaning

Bed & blanket

Bulky & heavy blanket

Light blanket & sheet

hcnuP inaS ดูดวัห

20

Since the vibrator inside is composed of precision parts, never disassemble the body.

Be careful not to let foreign objects clog the air suction part on top of the vacuum nozzle.

Since removal of the punch bar may cause performance problems, do not warp or remove it.

Attach the bottom plate properly before using. Without this bottom plate, it may not function.

For simple cleaning of the vacuum nozzle, detach the Sani Punch nozzle from the telescopic tube and attach the crevice tool

to vacuum dust.

mottoBpoT

Since this vacuum nozzle has been made exclusively for cleaning beds, blankets and

upholstery, use it only for these cleaning purposes.

(Using it to clean the floor may result soiling it or a drop in performance, do not use it

for such purposes.)

21

Press the button on the

rear side of the vacuum

nozzle to separate the

bottom plate.

Straighten the punch bar

on the lower section.

Insert the attachment

projections on bottom

plate to the vacuum

nozzle grooves.

Push down the tabs

to secure.

Wipe all the soiled parts

of the vacuum nozzle

body with a cloth.

Wash the removed bot-tom

plate with water and dry it.

Follow the instruction below for through washing.

(Do not soak the entire body of the vacuum nozzle in water, it may cause the vibrator to malfunction)

22

Bottom plate

Punch bar

Bottom plate

Push the button 2-3 times

when the dust is filled in

the dustbin while cleaning

Take the bin to fix into

the projection part and

then turn it clockwise to

connect.

When the dust is fully

filled after cleaning,

take the bin and turn it

counterclockwise to

disconnect

Waste the dust in

the bin

23

Projection

Page is loading ...

1

2 3

Dusting Brush (depending on model)

Dusting brush is for vacuuming picture

frames, furniture frames, books and other

irregular surfaces.

Crevice Tool(depending on model)

Crevice tool is for vacuuming in those normally

hard-to-reach places such as reaching

cobwebs or between the cushions of a sofa.

Upholstery Nozzle(depending on model)

Upholstery nozzle is for vacuuming upholstery,

mattresses etc.

How to use Using accessory nozzles

Crevice tool

Upholstery nozzle

Dusting brush

วิธีการใช้งาน

การใช้งานหัวดูดต่างๆ

หัวดูดตามซอกมุม

า้ผะาบเ / าฟซโดหัวดู

หัวดูดแบบแปรง

หัวดูดตามซอกมุมใชสำหรับ

ดูดในพื้นที่ที่ยากต่อการเข้าถึง

อืรห มุมตามซอกมุมงมแยใ น่ชเ

็นต้นปเ ะาบเ ,าฟซโงอบริเวณร่

ชใ าฟซโดหัวดู ้สำหรับดูดโซฟา

และเบาะผ้าต่างๆ

ชใ งรปแบบแดหัวดู ้สำหรับดูดกรอบรูป

ื้นผิวที่พะลแ อังสืนห ,เฟนอร์นิเจอร์

ไม่เรียบต่างๆ

มกอซมาตดหัวดู )เฉพาะรุ่น( มุ

ระาพฉเ( าฟซโดหัวดู )ุ่น

ระาพฉเ( งรปแบบแดหัวดู )ุ่

น

25

1

2

3

Page is loading ...

LG VC4220NHTY Owner's manual

LG VC4220NHTY Owner's manual

Related papers

Other documents