2. Jet Tools
  3. JBTS-10BT-3

Jet Tools JBTS-10BT-3, JBTS-10LS-2 User manual

  • Hello! I am an AI chatbot trained to assist you with the Jet Tools JBTS-10BT-3 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the maximum rip cut capacity of the Jet Tools JBTS-10LS-2?
    What is the maximum cut depth at 45 degrees?
    What is the maximum cut depth at 90 degrees?
    What is the maximum width of dado?
    What is the arbor speed of the Jet Tools JBTS-10LS-2?
    What is the table size without extension wings?
    What is the table size with extension wings?
    What is the overall dimension of the Jet Tools JBTS-10LS-2?
    What is the net weight of the Jet Tools JBTS-10LS-2?
jettools.com
10" Bench Top Tablesaw
For a fast set-up and a quick cut, choose the new
JET 10" Bench Top Tablesaw. Exclusive features include the
Smooth Speed™ Belt Drive Transmission with Poly-V Belt,
which eliminates vibration to the blade, and the
Precision-Rule™ Measurement System for quick
identification of cutting capacity. Keep wood supported
through the cut by use of rapid extension wings and
a rear outfeed support, standard on both models.
708315LSB
708315BTC
BUILT BET TER TO BUILD BET TER
™
Bench Top Tablesaw Sell Sheet.indd 1 8/17/05 3:30:21 PM
STOCK NUMBER 708315BTC 708315LSB
Model
JBTS-10BT-3 JBTS-10LS-2
Rapid Wing Extensions
1 2
Leg Stand with Steel Storage Shelf
No Yes
Dust Collection Adaptor Port
No Yes
Motor
15 Amp, 120V 15 Amp, 120V
Blade Diameter (in.)
10 10
Arbor Diameter (in.)
5/8 5/8
Maximum Rip Cut Capacity (in.)
24-1/2 24-1/2
Maximum Cut Depth at 45º (in.)
2-1/2 2-1/2
Maximum Cut Depth at 90º (in.)
3 3
Maximum Width of Dado (in.)
1/2 1/2
Table Height from Surface/Ground (in.)
12 35
Table Size without Extension Wing(s) (L x W/in.)
18 x 33 18 x 33
Table Size with Extension Wing(s) (L x W/in.)
18 x 41 18 x 55
Overall Dimensions (W x D x H/in.)
33-1/2 x 18 x 14 39 x 18 x 35
Arbor Speed (RPM, no load)
5,000 5,000
Net Weight (lbs.)
52 79
jettools.com
10" BENCH TOP TABLESAW
5
YEAR
WARRANTY
10" BENCH TOP TABLESAW
See-through blade guard
with splitter and
anti-kickback fingers
Table insert for
easy blade and
dado changes
Smooth Speed™
Belt Drive Transmission
with Poly-V Belt
On-board
storage for
power cord,
rip fence,
miter gauge,
saw blade
and wrenches
Rear outfeed
support
Precision-Rule™
Measurement
System
Rapid wing
extension
708315BTC
708315LSB
■ Exclusive Design
Constructed with steel corner posts
for the toughest applications
■ Smooth Speed™ Belt Drive
Transmission with Poly-V belt
Eliminates vibrations to the blade and extends life of motor,
provides quieter operation and better transfer of power
■ Precision-Rule™ Measurement System
Provides quick identification of cutting capacity
up to 24-1/2" (when wing is fully extended)
■ Rapid Wing Extension
Expands work surface up to 41" (with single extension)
or 55" (with two extensions) for additional support
■ Leg Stand with Steel Storage Shelf
Converts tablesaw from benchtop to stationary
(standard with 708315LSB)
■ Precision Machined Miter Slots
Provides direct control of miter gauge resulting in better cuts
■ Dust Collection Adaptor Port
Connects either 2-1/2" shop vacuum or 4" dust collection
system (standard with 708315LSB)
■ Dual Function Hand Wheel
Raises and bevels blade for quick and accurate setup
■ Rear Outfeed Support
Provides outfeed support and also converts
to a left side extension
■ Contoured Side Handles
Allows easy lifting and mobility of saw
■ On-Board Storage
Convenient storage for power cord, rip fence,
miter gauge, saw blade and wrenches
Stock No. 900792
10M 08/05
©2005 WMH TOOL GROUP, Inc. All Rights Reserved.
Bench Top Tablesaw Sell Sheet.indd 2 8/17/05 3:30:28 PM
/