Jet Tech RW-100 Datasheet

Brand: Jet Tech

Model: RW-100

Type: Datasheet

RACK AND CART WASHER

MODEL RW-100

STANDARD EQUIPMENT:

•

#16 gauge polished 304 stainless steel housing

with #12 gauge 2B finish 304 stainless steel tank

•

10 HP wash pump delivers 300 gal. of wash solution

at 40 psig. This water, through nozzles on both

rotating side wash arms, is blasted onto the soiled

racks and wares

•

All wash piping and nozzles are stainless steel

•

All rinse piping and nozzles are brass

•

Brass steam injector, with temperature control valve

for tank heat

•

2-1/2” diameter gauges for easy readability

•

Stainless steel control panel enclosure

•

16” diameter vent opening

NOTE: The machine will be shipped knocked down

(to be assembled at site by the customer)

UTILITY REQUIREMENTS

•

Fresh (rinse) water: 20 gpm @ 22 psig and

180-185º F at the machine

•

Steam tank heat: 350 lb./hr. @ 12-15 psig

•

Electrical:

- 208v-3ph-60hz, 8kw, 36 amp

- 230v-3ph-60hz, 8 kw, 32 amp

- 460v-3ph-60hz, 8 kw, 16 amp

OPTIONAL EQUIPMENT:

•

Second door for pass-thru operation

•

Stainless steel temp-coils and steam trap

for the tank heat

•

Powered vent fan

•

Rinse water temperature booster;

steam heated or electric

Steam booster requirements:

Fresh (rinse) water: 20 gpm @ 22 psig

and 120-140º F at the machine

- Steam flow rate for 120º F water: 650 lb./hr.

@ 12-15 psig. (Actual consumption: 100 lb./hr.)

Steam flow rate for 140º F water: 450 lb./hr.

@ 12-15 psig. (Actual consumption: 70 lb./hr.)

• Racks:

Custom racks per customer’s requirement

INDUSTRIAL DIVISION

Washes racks and carts up to 36” W. x 72” D. x 78” H.

The walk-in design, when utilizing the appropriate loading racks, can

also be used as a pot and pan washer.The standard model is built with

one door. Optional second door can be supplied for pass-thru operation.

INDUSTRIAL DIVISION

MODEL RW-100

JET TECH SYSTEMS CORP.

TEL: (514) 737-9701 TOLL FREE: (888) ASK 4 JET FAX: (514) 342-3854

Engineering Offices (CENTPAR INDUSTRIES): N.J. TEL: (908) 322-6150 FAX: (908) 322-6110

www.jet-tech.com e-mail: [email protected]

In line with our continuing policy on research and product development, we reserve the right to alter specifications without notice.

Jet Tech RW-100 Datasheet

Jet Tech RW-100 Datasheet

Related papers

Other documents