PLD Series
Mod D.E. Aboveground Systems
pumps / filters / heaters / heat pumps / automation / lighting / cleaners / sanitizers / maintenance products
www
.staritepool.com
Phone: 800-831-7133 Fax: 800-284-4151
12/05 Part # P1-716
©2005 P
entair
W
ater Pool and Spa, Inc. All rights reserved.
V
iew from the top
T
op-mounted pressure gauge is conveniently positioned for
e
asy reading.
Y
ear-in, year-out toughness
R
ugged, high-density composite resin stands tough against
c
orrosion and weathers the elements.
E
asy access
P
osi-Ring
®
c
losure provides safe, easy access to the filter
m
odule.Tank design permits rinse-in-place cleaning. Fast in,
f
ast out!
T
he joy of low maintenance
Large capacity trap collects more dirt and extends the time
between cleanings.
A dynamic duo
The PLD system incorporates a performance-matched pump and filter,
which increase energy efficiency and reduce sound emissions. And, with
your leisure time in mind, the components are designed to need only
occasional maintenance.
Less maintenance . . .YES!
The balanced-flow tank design directs water through
both sides of the filter module, which dramatically
increases filter surface area and dirt-loading capability.
And that means a longer time between cleanings.
Easy, two-way cleaning
For quick cleaning, simply move the valve lever to
the backwash position – that’
s i
t! For more thorough
cleaning, remove the tool-free tank lid and spray-rinse
the module
*
while it’s still in place. In minutes, it’s
ready f
or another season.
*Modules used in conjunction with certain pool/spa
sanitizers may require soaking in special cleaning solutions.
Available from:
Filter Performance
For Pools Optimal
1
D.E.
Pump up to (Gal.) Performance Required
2
Model (HP) 8 Hr.Turnover at this GPM (lbs.)
PLD50JWAE 1 21,600 45 6
PLD50JWAF 1
1
⁄2 26,400 55 6
1
Operating at this GPM will provide the longest filter cycles combined with the
best and greatest dirt-loading capacity.
2
Do not use more D.E. than shown here. Mixed results with D.E. alternatives.
Operating Limits – Maximum continual operating pressure is 30 PSI. For pool/
spa (bather) applications, the maximum operating water temperature within the
filter is 104°F (40°C).
One-year limited warranty. See warranty for details.