Page is loading ...
IMPORTANT
The instructions of this manual are for reference about the product. There may
be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
Before using your new Steren´s product, please read this instruction
manual to prevent any damage.
CAUTIONS
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
01 800 500 9000
Product design and specications are subject to change without notice.
Product: Ultrasmart acid battery charger
Part number: BR-600
Brand: Steren
CONNECTION
OPERATION
1. Select the type of tips that t your needs and
connect the harness to the charger.
2. Connect the black lead of the charger to the
negative terminal of the battery.
3. Connect the red lead of the charger to the positive
terminal of the battery.
4. Plug the power cord of the charger into a home
outlet. The power LED will turn on.
1. Select operation mode according to the voltage of
the battery (6 or 12V) using the MODE button.
2. The charging will begin and the led indicators
will light up one by one according to the charge
level. If battery has very low voltage or chemical
level, the charger will enter in recovery mode and
the corresponding LED will turn on (a moment may
pass). When charging is complete, the charger will
turn off for 30 minutes and turn on for another 30
minutes to maintain the battery. When the battery is
charged, you can disconnect the charger.
3. To disconnect the charger, remove the power cord
from the outlet, rst remove the red lead, and nally,
disconnect the black tip.
SPECIFICATIONS
Input: 110 to 120 V~ 50/60 Hz 22 W max.
Output: 12.6 /6.3 V --- 0.9 A
Consumption: 13 W/h
Stand-by power consumption:1.8 W/h
-If the battery is unrecoverable, the error LED indicator will
light. Replace the battery with one in good condition.
-When the battery is not connected, the reverse polarity LED
will light up.
- The harness with eyelet connectors has a fuse. If this
blows, open the lid and replace the fuse with one of the same
characteristics.
E
6V
12V
25%
50%
75%
100%
• The smart charger can be used on 6 V and 12 V acid-lead batteries.
• It can reestablish the charge on batteries almost drained.
• It features indicators for battery status, inverted connection, charge error, and
damaged battery.
• Their alligator connectors allow using any kind of battery no matter of their connectors.
• Manufactured in high resistance ABS plastic.
• Charge indicator.
• Damaged battery indicator.
• Medium and high capacity battery support.
• Restore almost drained batteries.
HIGHLIGHTS
CONTROLS
PARTS
1. Mode button
2. Charge level
3. Mode
4. Recovery
5. Reverse polarity
6. Power
7. Error
1. Harness with alligator connectors
2. Harness with eyelet connectors
3. Charger
1
2
3
• Before to connect the battery, please verify the voltage of it.
• Make sure about power output from the electrical network.
• Do not use this charger in humid or wet environments.
• Never leave the clamps disconnected, if you still don´t unplug the charger from the
outlet.
POWER
MODE
6V
12V
25%
50%
6V
12V
75%
100%
ERROR
1
2
3
4
5
6
7
- This chart is only a reference, the charging time may vary depending on the battery type and
use conditions.
-
1
-
2
