SMART Technologies Board V280 is an interactive whiteboard that helps you engage your audience and make your presentations more dynamic. With its user-friendly software, you can easily create and deliver engaging lessons, presentations, and activities. You can also use the board to collaborate with others in real time, making it a great tool for brainstorming sessions and group projects.
SMART Technologies Board V280 is an interactive whiteboard that helps you engage your audience and make your presentations more dynamic. With its user-friendly software, you can easily create and deliver engaging lessons, presentations, and activities. You can also use the board to collaborate with others in real time, making it a great tool for brainstorming sessions and group projects.
SMART Notebook™ for
SMART Board™ V280
Interactive Whiteboards
Installation Guide
Linux® Operating Systems
Product registration
If you register your SMART product, we’ll notify you of new features and software
upgrades.
Register online at www.smarttech.com/us/Product+Registration
.
Keep the following information available in case you need to contact SMART
Technical Support.
Serial Number: ___________________________________________________
Date of Purchase: ___________________________________________________
Trademark notice
The SMART logo, SMART Board, SMART Notebook and smarttech are trademarks or registered trademarks of SMART
Technologies ULC in the U.S. and/or other countries. Linux is a registered trademark of Linus Torvalds. All other third-party
product and company names may be trademarks of their respective owners.
Copyright notice
©2010 SMART Technologies ULC. All rights reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system or translated into any language in any form by any means without the prior written
consent of SMART Technologies ULC. Information in this manual is subject to change without notice and does not
represent a commitment on the part of SMART.
Patent No. US6320597; US6326954; US6741267; US7151533; US7499033; and CA2252302. Other patents pending.
05/2010
Contents
1 Installing SMART Notebook .................................................................................. 1
Computer requirements .................................................................................. 1
Linux distributions tested.......................................................................... 1
Autopackage ............................................................................................ 1
Software installation........................................................................................ 2
A Customer support.................................................................................................. 5
Online information and support....................................................................... 5
Training........................................................................................................... 5
Technical support ........................................................................................... 5
General inquiries............................................................................................. 6
Registration..................................................................................................... 6
ii | CONTENTS
Chapter 1
Installing
SMART Notebook™
Computer requirements
• Pentium® III 1.2 GHz processor
• 512 MB of RAM (1 GB recommended)
• 350 MB of free hard disk space for minimum installation (900 MB for full
installation with Gallery collections)
• X Window System™ version 11 release 6 (X11R6) or later (must support XRender
and Xinerama™)
• glibc 2.3.3 (gcc 3.4.2) or later
• libstdc++6 or later
• GNOME™ 2.8.0+ (recommended)
Linux distributions tested
• Guadalinex V6 at kernel version 2.6.28-16-generic
• LLurex 9.09 at kernel version 2.6.27-17-generic
• MAX 5.0 at kernel version 2.6.28-18-generic
• Ubuntu® 9.04 at kernel version 2.6.28-18-generic
• Linkat 3.0 at kernel version 2.6.27.45-0.1-pae
NOTE
Only the kernels above are supported. All other distributions, including 64-bit
Linux, aren’t supported.
Autopackage
The SMART Notebook software 10 installer uses the Autopackage system. You need
your root password to install SMART Notebook software 10 and the Autopackage
system. For more information about Autopackage, go to www.autopackage.org
.
2 | CHAPTER 1 – INSTALLING SMART NOTEBOOK
Software installation
Before you install SMART Notebook, you must obtain a product key.
To obtain a product key 1. Go to smarttech.com/NB10ProductKey/
.
2. Type your SMART product’s serial number, choose your organization type, and
then click Continue.
3. Complete the customer information form.
SMART e-mails you a product key.
4. Continue the download and installation procedures while you wait for the e-mail.
During the installation, use the product key you receive from SMART to activate
your software.
NOTES
• You can activate every copy of SMART Notebook software 10 in your school
using the same product key.
• Until you activate the software, you have only a 30-day trial version.
To download SMART
Notebook software 10
1. Go to:
www2.smarttech.com/st/en-US/Support/Downloads/SBS/NBS10Linux.htm
2. Under the SMART Notebook software 10 full download heading, click Download.
3. Fill out the Download software form, and then click Start download.
The Download Confirmation page appears, and then the File Download dialog
box appears.
4. Click Save.
The Save As dialog box appears.
5. Browse to where you want to save the file, and then click Save.
The Download complete dialog box appears.
6. Click Close.
To install SMART
Notebook software 10
1. Browse to where you saved the file, and then double-click SMART Notebook
Software With Drivers 10.tar.gz.
Your file compression program opens.
2. Decompress SMART Notebook Software With Drivers 10.tar.gz, and then
browse to the decompressed folder.
3 | CHAPTER 1 – INSTALLING SMART NOTEBOOK
3. If you have Autopackage installed on your computer, double-click SMART
Notebook Software With Drivers 10.package, and then follow the on-screen
installation instructions.
OR
If you don’t have Autopackage installed on your computer, make the .package file
executable and run it on terminal. This installs Autopackage and then
the software.
NOTE
For instructions on installing software with Autopackage, go to:
www.autopackage.org/howtoinstall.html
When the installation finishes, you can access SMART Notebook software 10 through
the Applications menu in the GNOME window manager.
If SMART Notebook software 10 doesn’t appear in the Applications Menu, the version
or distribution of Linux doesn’t support menu installation. You can use the command
line to start SMART Notebook software 10 by typing notebook on terminal, or you can
browse to /opt/SMART Technologies/SMART Notebook/bin, and then double-click
notebook.
4 | CHAPTER 1 – INSTALLING SMART NOTEBOOK
Appendix A
Customer support
Online information and support
Visit www.smarttech.com/us/Support/Browse+Support to view and download user’s
guides, how-to and troubleshooting articles, software and more.
Training
Visit www.smarttech.com/us/Resources/Training for training materials and information
about our training services.
Technical support
If you experience difficulty with your SMART product, please contact your local
reseller before contacting SMART Technical Support. Your local reseller can resolve
most issues without delay.
NOTE
To locate your local reseller, visit www.smarttech.com/us/Where+To+Buy
.
All SMART products include online, telephone, fax and e-mail support:
Online www.smarttech.com/contactsupport
Telephone +1.403.228.5940 or
Toll Free 1.866.518.6791 (U.S./Canada)
(Monday to Friday, 5 a.m. – 6 p.m. Mountain Time)
Fax +1.403.806.1256
E-mail [email protected]
6 | APPENDIX A – CUSTOMER SUPPORT
General inquiries
Warranty
Product warranty is governed by the terms and conditions of SMART’s “Limited
Equipment Warranty” that shipped with the SMART product at the time of purchase.
Registration
To help us serve you, register online at www.smarttech.com/us/Product+Registration.
Address SMART Technologies
3636 Research Road NW
Calgary, AB T2L 1Y1
CANADA
Switchboard +1.403.228.5940 or
Toll Free 1.866.518.6791 (U.S./Canada)
Fax +1.403.228.2500
E-mail [email protected]
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
SMART Technologies V280 User manual
- Type
- User manual
- This manual is also suitable for
SMART Technologies Board V280 is an interactive whiteboard that helps you engage your audience and make your presentations more dynamic. With its user-friendly software, you can easily create and deliver engaging lessons, presentations, and activities. You can also use the board to collaborate with others in real time, making it a great tool for brainstorming sessions and group projects.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
SMART Technologies Audio 240 Template
-
-
-
-
-
-
-
-
-