none FPKIT User guide

Type
User guide
Lightweight Fire Pit Kit Assembly
Installation Step 1
Choose a clear, flat area - 42" x 42" - free of overhanging branches and other flammable
material. Check with local building codes to determine how close to building structures you are allowed to
install your new Fire Pit Kit with Screen Cover.
Step 2
Form the first row, setting each block end to end to form a circle. No need to measure,
each block fits with the next to form the circle automatically.
Step 3
Place the second layer of block on top of the first layer, making sure to alternate the
seams so that they don't line up. This will give the block wall some strength and give the Fire Pit that
"Stacked Stone" look that is visually appealing.
Final Step
After repeating Step 3 to place the 3rd row of block, check the Fire Pit for gaps and
spaces. When you are satisfied with the look of the Fire Pit, place the Fire Pit Bowl in place on top of the 3rd
row of block. Follow this with the Charcoal Grate and then the Screen Cover. Your Fire Pit Kit is ready to
use!
  • Page 1 1

none FPKIT User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI