Trek7 aasyn16 User manual

Type
User manual
How To Apply
1. Start with thoroughly clean and dry fabric free of soap residue. Follow the
manufacturer;s directions to remove all soiling and residue
2. Apply outdoors or in a well-ventilated area
3. Test for colorfastness in small inconspicuous area
4. Spray until item is evenly wet slightly overlapping sprays
5. if drops form on surface, wet a sponge with Aqua Armor and gently wipe drop. Do
not allow large drops to dry
6. Allow treated fabric to dry completely. Full sunlight is preferable. Leave out over
several days for best results
7. Test for waterproofing by sprinkling water on surface. If protection is not sufficient,
a second application may be necessary.
  • Page 1 1

Trek7 aasyn16 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI