Legrand Wire & Seam Clip & End Fittings Installation guide

Use a #8 (5/16", 7.9mm head size) pan head fastener or equivalent to attach fittings to mounting surface.

Utilisez une attache à tête panoramique de calibre 8 [tête de 7.9mm (5/16")] ou une fixation équivalente pour

assujettir les raccords à la surface de montage.

Use un sujetador de cabeza plana #8 (5/16" tamaño de cabeza 7.9mm) o su equivalente para sujetar las

instalaciones a la superficie de montaje.

NM2000WC

NM2010B

NM2027S

NM2006

2306

The Wiremold Company 60 Woodlawn St. W. Hartford, CT 06110 41366R2 0603

Poly Bag 41366R2

NOTE: This device features internal protection

that will disconnect the surge protective

component at the end of its life but

will maintain power to the load – now

unprotected. If this situation is

undesirable for the application,

follow manufacturer’s instructions

for replacing the device.