2. POLYWOOD
  3. NCT3772BL

POLYWOOD NCT3772BL Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the POLYWOOD NCT3772BL Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
B - .27 X 3 SOCKET WAFER A
8
A - .27 X 2-1/2 SOCKET WAFER A
16
4mm HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
TOOLS NEEDED
Table Frame
C
B
Foot
Leg
Brace
C
Leg
A
A
B
Removable table plug
included in table.
C - 1/4-20 X 2-1/2 WAFER SHCS
8
9/27/2012
ASSEMBLY INSTRUCTIONS
Attach braces to the leg assemblies using
Step 3
(8) .27x3" screws
Qty. Description
__(1) Table top
__(8) Leg
__(4) Foot
__(4) Brace
__(1) Hardware pack
Model:
NCCT3772, NCT3772, NCRT3772, NCBT3772
Step 2
Lay the table frame on a flat surface.
Attach the leg assemblies to the frame using
(16) .27x2½" screws - Do not tighten yet.
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
Step 4
Set table upright and tighten all bolts.
Step 1
Attach feet to legs using (8) 2½" Chair bolts.
/