Moen 6190BL Specification

Type
Specification
Specifications
DESCRIPTION
Metal construction with various nishes identied by sux
Flexible supply lines with 3/8" compression ttings
Includes metal pop-up waste assembly
Includes optional 3 hole deck plate (escutcheon)
Includes Red/Blue Temperature Indicators
OPERATION
Lever style handle
Temperature controlled by 100° arc of handle travel
FLOW
Water usage is limited to these maximum ow rates as indicated by the
corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
1255™ Duralast™ cartridge
Nonmetallic/nonferrous and ceramic material
STANDARDS
Third party certied to WaterSense,® ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein
Certied to NSF 61/9 & 372
Products marked with 1.2 gpm are compliant with California water
eciency regulations
Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
ALIGN™
Single-Handle Lavatory Faucet
Models: 6190 series
NOTE: THIS FAUCET IS DESIGNED
TO BE INSTALLED THROUGH 1 HOLE,
1-1/4" MIN. DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 4/17
6-3/8"
(162mm)
3-5/16"
(84mm)
2-1/2"
(63mm)
Max.
Optional
Escutcheon
6"
(152mm)
4-3/16"
(106mm)
3"
(76mm)
1-9/16"
(40mm)
2"
(51mm)
3/8"
(9.5mm)
5"
(127mm)
30"
(762mm)
Lift
Rod
There is more than 1 version of this model.
Page down to identify the version you have.
Specifications
DESCRIPTION
Metal construction with various nishes identied by sux
Flexible supply lines with 3/8" compression ttings
Includes metal pop-up waste assembly
Includes optional 3 hole deck plate (escutcheon)
Includes Red/Blue Temperature Indicators
OPERATION
Lever style handle
Temperature controlled by 100° arc of handle travel
FLOW
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
1255™ Duralast™ cartridge
Nonmetallic/nonferrous and ceramic material
STANDARDS
Third party certied to WaterSense,® ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein including NSF61/9 & 372
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
ALIGN™
Single-Handle Lavatory Faucet
Models: 6190 series
NOTE: THIS FAUCET IS DESIGNED
TO BE INSTALLED THROUGH 1 HOLE,
1-1/4" MIN. DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 4/17
6-3/8"
(162mm)
3-5/16"
(84mm)
2-1/2"
(63mm)
Max.
Optional
Escutcheon
6"
(152mm)
4-3/16"
(106mm)
3"
(76mm)
1-9/16"
(40mm)
2"
(51mm)
3/8"
(9.5mm)
5"
(127mm)
30"
(762mm)
Lift
Rod
  • Page 1 1
  • Page 2 2

Moen 6190BL Specification

Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI