SportsArt E872MP Owner's manual

Brand: SportsArt

Model: E872MP

Type: Owner's manual

Sports Art Industrial Co., Ltd. TUV-CERT ISO 9001/9002 Certied Quality Products 2012.11.28

ICARE E872M

Body Weight Support System Platform’s Manual

ICARE E872MP OWNER’S MANUAL CONTENTS

1. INTRODUCTION ...............................................................................2

2. SAFETY PRECAUTIONS .................................................................3

3. LIST OF PARTS ................................................................................4

4. ASSEMBLE THE PRODUCT ............................................................5

1. INTRODUCTION

Congratulations on your purchase of the SportsArt ICARE E872MP Body

Weight Support System Platform. Made through a partnership between

Madonna ICARE and SportsArt Fitness, this product was built specically

for physical rehabilitation.

Before this product is assembled or operated, we recommend that you famil-

iarize yourself with this manual. Understanding the correct methods of assembly

and operation will help ensure that exercisers obtain their goals safely and

successfully.

2. SAfETy PRECAUTIONS

Safety was an important consideration in the design of the SportsArt Fitness

ICARE E872MP Body Weight Support System Platform. However, during the use

of the physical rehabilitation elliptical trainer and the Body Weight Support System

Platform, you must pay careful attention to the safety.

● For safety, operate this product only as instructed, and install only SportsArt parts

onto this product.

● Assemble the Body Weight Support System Platform on a solid, level surface;

DO NOT use it outdoors or near water.

● Check the Body Weight Support System Platform before every use. Make sure

all parts are assembled, and all fasteners are tightened. DO NOT use the Body

Weight Support System Platform if the unit is not fully assembled.

● If this product is damaged in any way, stop operating it. If this product has

any issue or is broken, notify the SportsArt service department.

● DO NOT use accessories or parts that are not specically recommended

by the manufacturer. Such parts might cause injuries or cause the unit to

fail.

● All users must be supervised at all times while using this product.

● Children should never be allowed to play on or near the product.

3. LIST Of PARTS

PART # DESCRIPTION QTY

IC02-001 4" Leg 4

IC02-002 8" Leg 15

IC02-003 18" Leg 8

IC02-007 Toe Guard 2

IC02-201 Full Platform Section 4

IC02-202 Clinician Platform 2

IC02-203 Platform Ramp 2

IC02-204 Half Platform Section 2

IC1042 1/4-20 x 5/8" Carriage Bolt, Zinc 57

IC1043 1/4-20 Nylock Nut 57

IC1073 Leg Cap 27

IC02-002

IC02-101

IC02-007

IC02-201

IC02-203

IC02-202

IC02-201

IC02-003

IC1073

4. ASSEMBLE THE PRODUCT

(a). Lay the platforms face down and organize them into groups as shown

below.

(b). Identify the proper legs and place them in the appropriate corners as

shown.

(c). Insert the bolts from the outside; tighten the nuts from the inside. In some

instances the bolt will go through two platforms and then a leg.

(d). Platforms that require toe guard will need to be lifted slightly to connect

toe guards properly.

IC1042

57X

18" LEG

IC02-003

IC02-202

USE 3x - 18" LEGS

IC02-201

USE 2x - 8" LEGS

IC02-201

USE 2x - 8" LEGS

IC02-201

USE 2x - 8" LEGS

IC02-203

USE 1x - 8" LEGS

IC02-203

USE 2x - 8" LEGS

IC02-204

USE 4x - 4" LEGS

IC02-204

USE 2x - 8" LEGS

IC02-201

USE 4x - 8" LEGS

IC1042

IC1043

TOE GUARDS -

Must lift platform

to bolt properly

IC1043

57X

IC02-202

USE 5x - 18" LEGS

8"LEG

IC02-002

15x

4" LEG

IC02-001

SportsArt E872MP Owner's manual

SportsArt E872MP Owner's manual

SportsArt E872MP Owner's manual

Related papers

Other documents