Instruction manual
TP-solar 60W solar Charger
TP-Solar Technik GmbH, 41468 Neuss,DE
-1-
1. Overview
Thank you for choosing portable solar charger, please read this instruction manual
carefully before use. And please keep the instruction manual properly for your referring
on necessary time.
Powered by monocrystalline silicon solar panel, Portable Solar Charger is designed to
provide emergency power for users to power digital devices or 12V battery.
Dual USB 5V output and 18V DC output for cellphone and laptop tablet GPS power
generator or other 5 -18V device, the solar charger is easy to use with fashionable
appearance and compact structure.
2. Use Direction
Package Contents
1 x 60W Foldable Triple-Port Solar Charger Bag
1 x DC to DC Cables for 18V Device
1 x Alligator Clip Cable for 12V Battery
1 x Cigarette Lighter Plug Cable for Car
1 x Compatible with MC4 connector cable
1 x USB to 55x21mm female connector cable for 12V battery
1 x 10-in-1 Connector Cable for Laptops
USB 5V output:
For iphone7/7Plus/6Plus/6s/6s plus/5s/5/5c, Galaxy s8/s7/s6/s5/A7/A5/A9, HTC, Nexus,
LG
For iPad Air, Pro, mini2/3/4, iPod touch 4/5/6, Galaxy Tab S/S3/S2/A/Pro, Galaxy Book,
Galaxy
DC 18V output
1- 10-in-1 Connector Cable for Laptops& solar generators
For laptop Dell, HP, Asus, Acer, Lenovo, Samsung, Square Trade, Toshiba, ALIENWARE.
For solar generators - Compatible with most solar generator, portable power station on the
market.
2- Alligator Clip Cable and Cigarette Lighter Plug
Works for any cars, motorcycle, boat, marine, tractor, RV, Power sports, snowmobile 12V
battery.
Note: please use the 14.5V USB to
55x21mm female connector cable to charge your 12V
battery.
Above are just typical operations. With appropriate fittings, it can be stuck on the glass,
hanged on the tent or similar situation;
When connected by USB output, it can offer emergency power for digital devices like
mobile phone, PAD etc.
This product can power most mobile phone models on the market. Whereas, certain
phone models may not be charged properly due to mobile phone charging circuit design
3. Product Parameter
Item
Product Model
60W Solar charger
S
olar panel
module
Solar panel type SUNPOWER Flexible Monocrystalline
Pmax 60 watt
Vmp 5.0V/19V
Imp 2A/3A
USB output
Output voltage DC 5V/9V/12V
Max output current 2A (support QC2.0 & 3.0)
DC output
Output voltage 19V
Max output current 3A
Indicator
illustration
light on Normal solar radiation, charging
Light off No sunshine/insufficient sunshine
Dimension
Expanded L785mm × W580 mm × H3 mm
Folded L290mm × W175 mm × H60 mm
Weight 1.4KG
4. Notice
When charging, please ensure solar panel surface facing the sun to get the Vertical
sunlight incidence angle, and make sure no other objects block the sunshine;
Solar panels with thin-film encapsulation should be avoided from the rocks, metal objects
striking, and other sharp objects;
● Do not bend the solar panel too much in case it will break off;
Keep the panel surface clean while charging, and the panel need to clean up from time to
time in order to keep the high efficiency of the solar power;
● Keep solar panels away from fire and the heat;
Try to prevent it from rain, if wet, please make it dry then continue to use;
To extend battery service life, conduct a charging maintenance every 3 months;
When the products haven’t put into work, should be folded and storage.
This manual mentioned product specifications and information are for reference only, if there are any
updates, without prior notice, unless there is a special agreement, this manual is used only as a guide
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI