Active Ventilation ASF-14-RF-WD Installation guide

Type
Installation guide
Installation Instructions for
Aura Vent, Aura Solar Fan & Pop Vent
Retro-Fit Products
Lastly use the four #8 self-taping screws (included in
the box) to attach the vent heads. Screws should be
placed at 12:00, 3:00, 6:00, 9:00.
Now slide your
replacement
head over the
existing collar
Collar
Base
* Before you install, make sure that
the replacement cap is the right size
diameter for your existing base.
Remove the old turbine “head” off the
collar. Leave the collar attached to the
turbine base on the roof.
  • Page 1 1

Active Ventilation ASF-14-RF-WD Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI