LG Electronics WM8100HVA User manual

LG Electronics
Brand
LG Electronics
Model
WM8100HVA
Category
Washing machines
Type
User manual
18
PREPARATION
u Check all pockets to make sure that they are
empty.
- Items such as clips, matches, pens, coins, and
keys can damage both your washer and your
clothes.
u Close zippers, hooks, and drawstrings to prevent
these items from snagging or tangling on other
clothes.
u Pretreat heavily stained areas before washing.
- Doing so will produce clean, stain-free results.
u Combine large and small items in a load. Load
large items first.
u Large items should not be more than half of the
total washload.
u The washer can be fully loaded, but the drum
should not be tightly packed with items.
-The door of the washer should close easily.
u Do not wash single items, except for bulky items
such as blankets. Make sure to wash laundry in
similar types of loads.
- Washing a single small item may result in the tub
becoming unbalanced, vibrating and making a
noise.
u Do not wash waterproof clothes.
- This may cause abnormal vibration, or may
cause the load to bounce, which could damage
the tub.
u Check if there are any other foreign objects in the
door seal and take extra care that clothes do not
get caught there.
- Foreign objects in the door seal may stain
clothes, and water may leak if clothes get caught
in the door seal.
u Wash underwear or small, light items in a laundry
net.
- Small, light items may get caught in the door
seal, and a brassiere hook may damage other
items or the tub.
u Brush heavy soil, dust, or hair off fabrics before
washing.
- Laundry may not wash clean if there is dirt or
sand on the fabrics, or they may damage due to
particles rubbing against sheer fabrics.
u Wash blankets individually.
- Washing more than one blanket together may
produce unclean results due to tangling or an
unbalanced load.
u Always separate fabrics according to their colors
and wash them separately to prevent colors from
running.
- Fabrics may damage or become stained due to
fabric dyes running, or due to foreign objects
transferring from one fabric to another.
u For best performance, load clothes as shown.
1
3
2
4
- Load clothes loosely, and do not overfill the
drum. Clothes need room to circulate in order
to get clean.
- Do not press down on items while stacking
them in the drum.
PREPARATION
Sorting Wash Loads
Read and observe the following to prevent shrinkage or damage to clothes.
19
ENGLISH
PREPARATION
Category Label Directions
Washing
Hand Wash
Machine Wash, Normal Cycle
Use Permanent Press/Wrinkle
Resistant washing machine
setting (which has a cool
down or
cold spray before the reduced
spin)
Use Gentle/Delicate washing
machine setting (slow
agitation and/ or reduced
wash time).
Do Not Wash
Do Not Wring
Water Temperature
Hot
Warm
Cold/Cool
Bleach symbols
Any Bleach (When Needed)
Only Non-Chlorine Bleach
(When Needed)
Do Not Bleach
Colors
Whites / Lights / Darks
Soil
Heavy / Normal / Light
Fabric
Delicates / Easy Care / Sturdy Cottons
Lint
Lint Producers / Lint Collectors
Fabric Care Labels
Most articles of clothing feature fabric care labels
that include instructions for proper care.
Sorting Laundry
It is recommended that you sort laundry into similar
loads that are washable in the same cycle.
Refer to the following chart for sorting clothes
20
PREPARATION
Loading the Dispenser
The detergent dispenser drawer of the washing
machine has a dispenser compartment for each
detergent type. Add each detergent to its appropriate
compartment.
1
Pull out the detergent dispenser drawer.
2
Add the appropriate detergent to its appropriate
compartment.
- If you use a liquid detergent, check if the liquid
detergent cup is in place.
- If you use a powdered detergent, remove the
liquid detergent cup and put the powder in the
main wash detergent compartment.
Liquid chlorine
bleach
compartment
Liquid
detergent
Cup
Main wash
detergent
compartment
Pre-wash
detergent
compartment
Liquid fabric
softener
compartment
3
Close the detergent dispenser drawer slowly.
- Slamming the detergent dispenser drawer may
result in the detergent overflowing into another
compartment or pouring into the tub earlier than
programmed.
NOTE
y
It is normal for a small amount of water to
remain in the dispenser compartments at the
end of the cycle.
Using Detergent/Fabric Softener
Recommended Detergent
Make sure to use HE (High-Efficiency) detergent
for front-loading washing machines. HE detergents
dissolve more efficiently and produce fewer suds to
ensure efficient washing and rinsing. Use the correct
amount of detergent as indicated on the label of the
detergent packaging.
Designed specially to use only
HE (High-Efficiency) detergent
NOTE
y
Only use HE detergents, since using a regular
detergent may produce excessive suds.
y
HE detergents produce fewer suds, dissolve
more efficiently to improve washing and rinsing
performance, and help to keep the interior of
your washer clean.
y
Use less detergent for soft water.
y
Wipe up any spills immediately, as liquids could
damage the finish and the control panel of the
washing machine.
y
Using too much detergent can cause a build-
up in the tub resulting in unsatisfactory
performance and machine malfunction.
y
If you use a detergent that does not dissolve
easily or a detergent with high viscosity, it will
leave a residue on the tub, which may not rinse
properly.
21
ENGLISH
PREPARATION
Liquid Bleach Compartment
This compartment holds liquid chlorine bleach,
which will be dispensed automatically at the proper
time during the wash cycle.
NOTE
y
Do not add powdered or liquid color-safe bleach
to this compartment.
y
Always follow the manufacturer’s
recommendations when adding bleach. Do not
exceed the maximum fill line. Using too much
bleach can damage fabrics.
y
Never pour undiluted liquid chlorine bleach
directly onto the load or into the drum. Fabric
damage can occur.
Fabric Softener Compartment
This compartment holds liquid fabric softener, which
will be automatically dispensed during the final rinse
cycle.
NOTE
y
Always follow the manufacturer’s
recommendations when adding fabric softener.
Do not exceed the maximum fill line. Using
too much fabric softener may result in stained
clothes.
y
Dilute concentrated fabric softeners with warm
water. Do not exceed the maximum fill line.
y
Never pour fabric softener directly onto the load
or into the drum.
Pre-wash Detergent Compartment
Add liquid or powdered detergent to this
compartment when using the pre-wash option.
Always use HE (High-Efficiency) detergent with your
washing machine.
NOTE
y
If liquid detergent is to be used for the main
wash when using the pre-wash option, the
liquid detergent cup accessory must be used
in main wash dispenser to prevent the main
wash liquid detergent from being dispensed
immediately.
y
The amount of detergent added for the pre-
wash option is 1⁄2 the amount recommended for
the main wash cycle. For example, if the main
wash cycle requires one measure of detergent,
add 1⁄2 measure for the pre-wash option.
Main Wash Detergent Compartment
This compartment holds laundry detergent for the
main wash cycle, which is added to the load at
the beginning of the cycle. Always use HE (High-
Efficiency) detergent with your washing machine.
Never exceed the manufacturer’s recommendations
when adding detergent. Using too much detergent
can result in detergent buildup in clothing and the
washer. Either powdered or liquid detergent may be
used.
NOTE
y
Liquid or powdered color-safe bleach may be
added to the main wash compartment with
detergent of the same type.
y
When using liquid detergent, make sure the
liquid detergent cup and insert are in place. Do
not exceed the maximum fill line.
y
When using powdered detergent, remove
the insert and liquid detergent cup from the
compartment. Powdered detergent will not
dispense with the liquid detergent cup and
insert in place.
22
OPERATION
OPERATION
Using the Washer
Load the laundry into the washing machine and close the door.
1
2
3
4
5
6
Press
A
.
- The lights around the cycle selector knob will illuminate and a chime will sound.
Turn
B
to the desired cycle.
- The proper default option is automatically set according to the wash cycle. See
page 23,
Cycle guide
, for more detailed default options for each cycle.
- See page 24,
Main cycle
, for details on the wash cycles.
- To change the options, press the option button and select the desired option.
See page 25,
Setting options before cycle
, for more details on options.
- Skip to step 4 to use the default setting without changing the options.
Add the proper amount of detergent and additions (bleach, softener) into the
detergent dispenser drawer.
- See page 20,
Using detergent/fabric softener
, for more details on using detergent.
Press
C
.
- The washing machine will start.
When the melody plays, the wash cycle is finished.
- When the washing cycle is finished, the door will unlock. Open the door and
remove the laundry immediately.
- Make sure to check around the door seal when taking out the finished load.
Small items may be caught in the door seal.
NOTE
y
The front-load washing machine rotates the laundry in a way that allows it to use less water while still
fully saturating your clothing. It is normal to not be able to see water during the wash cycle.
y
If the temperature or the water level inside the machine is too high, the door locks and cannot be
opened. To open the door while washing, use the Rinse + Spin feature.
WARNING
y
To reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance.
23
ENGLISH
OPERATION
Cycle Guide
The cycle guide below shows the options and recommended fabric types for each cycle.
●
= Available option
CYCLE FABRIC TYPE
DISPLAY
TIME(MIN)
BASIC OPTION (
=DEFAULT) ADDITIONAL OPTIONS
Wash
Temp.
Spin
Speed
Soil
Level
Steam
Cold
Wash™
Delay
Wash
Extra
Rinse
Pre
Wash
Turbo
Wash™
Allergiene™
Cotton, underwear,
pillow covers,
bed sheets, baby
wear
103~138
-
Extra High
High
★
Medium
Low
No Spin
-
Sanitary Heavily soiled
underwear, work
clothes, diapers,
etc.
116~129
Extra Hot
★
Extra High
High
★
Medium
Low
No Spin
Heavy
Normal
★
Light
Bright
Whites
™
White Fabrics 72~85 Hot
★
Warm
Cold
Tap Cold
Extra High
High
★
Medium
Low
No Spin
Heavy
Normal
★
Light
Bulky/Large Large items such as
blankets and
comforters
84 Hot
Warm
★
Cold
Tap Cold
Medium
★
Low
No Spin
Heavy
Normal
★
Light
Heavy Duty
Heavy soiled Cotton
Fabrics
91~132 Extra Hot
Hot
Warm
Cold
Tap Cold
Extra High
★
High
Medium
Low
No Spin
Heavy
★
Normal
Light
Cotton/
Normal
Cotton, linen,
towels, shirts,
sheets, jeans,
mixed loads
26~53 Extra Hot
Hot
Warm
★
Cold
Tap Cold
Extra High
High
★
Medium
Low
Heavy
Normal
★
Light
Jumbo Wash Comforter 84 Hot
Warm
★
Cold
Tap Cold
High
★
Medium
Low
No Spin
Heavy
Normal
★
Light
Towels
Towels 61~74 Hot
Warm
★
Cold
Tap Cold
Extra High
★
High
Medium
Low
No Spin
Heavy
Normal
★
Light
Perm.Press Dress shirts/pants,
wrinkle-free
clothing, poly/
cotton blend
clothing,
tablecloths
37~47 Hot
Warm
★
Cold
Tap Cold
High
Medium
★
Low
Heavy
Normal
★
Light
Hand Wash/
Wool
Items labeled
“hand-washable”
55 Warm
★
Cold
Tap Cold
Low
★
No Spin
Normal
★
Light
Delicates Dress shirts/
blouses,
nylons, sheer or
lacy garments
41 Warm
Cold
★
Tap Cold
Medium
★
Low
No Spin
Heavy
Normal
★
Light
Speed Wash Lightly soiled
clothing
and small loads
15 Hot
★
Warm
Cold
Tap Cold
Extra High
★
High
Medium
Low
No Spin
Heavy
Normal
Light
★
Small Load Normally soiled
and small loads.
49~51 Hot
Warm
★
Cold
Tap Cold
Extra High
High
★
Medium
Low
No Spin
Heavy
Normal
★
Light
Tub Clean This cycle is
designed to remove
a mildewy or musty
smell.
93~95
Cycle time depends on type and amount of load and detergent,water pressure and chosen additional options.
- If the Turbo Wash™ option is on, you cannot select “No Spin” as your Spin Speed.
(If the Turbo Wash™ option is off, you can select “No Spin” as your Spin Speed.)
24
OPERATION
Heavy Duty
: Heavily Soiled Items
This cycle is for washing heavily soiled laundry
though more powerful tub rotation.
Jumbo Wash
: Comforters
This cycle is for washing king or queen comforter.
Perm. Press
: Wrinkle-Free Items
This cycle is for washing items such as wrinkle-free
clothes or tablecloths to minimize wrinkles.
Delicates
: Sheer Items
This cycle is for washing lingerie or sheer and lacy
clothes which can easily be damaged.
Towels
This cycle is for washing towels.
Small Load
: Washing a Few Items
This cycle is for normally soiled and small loads.
Hand Wash/Wool
: Items Labeled Wool or
Hand-Wash
This cycle is for washing shrinkable woolen or hand-
washable items requiring delicate care. Only wash
woolen items that are labeled machine washable or
hand-washable.
NOTE
y
Laundry weight should be less than 8 pounds
(3.6 kg) to prevent damage to the fabric.
y
Use only natural or wool-safe detergent
harmless to fabrics and load 1/2 of the normal
amount of detergent.
y
The Hand Wash/Wool cycle uses a gentle
tumble rotation angle and low speed spin for
the ultimate fabric care.
Speed Wash
: Washing Quickly
Use the Speed Wash cycle to quickly wash lightly
soiled clothing and small load. For high wash and
rinse efficiency, it is recommended to wash small
loads of 2-3 lightly soiled garments.
NOTE
y
Use very little detergent in this cycle. If you
want more rinsing, you can add an extra rinse
by using the Extra Rinse option button.
Wash Cycles
You can wash laundry items more thoroughly by
selecting the wash cycle that best suits the type
of items to be washed. Turn the
B
to the desired
cycle. When you select a wash cycle, the light for
the corresponding wash cycle will turn on. See page
22,
Basic operation
, for more details on operating
methods.
Allergiene™
: Reducing Laundry Allergens
This cycle is a powerful, high temperature cycle
designed specifically to reduce certain allergens.
NOTE
y
Selecting the Allergiene™ cycle automatically
incorporates steam into the wash cycle.
y
The Allergiene™ cycle can significantly reduce
allergens in bedding and clothing.
y
The Allergiene™ cycle helps reduce dust mite
populations and helps reduce allergens.
y
Due to the higher energy and temperatures
used, the Allergiene™ cycle is not
recommended for wool, silk, leather, or any
other delicate or temperature sensitive items
Sanitary
: Reducing Laundry Bacteria
This wash cycle reduces 99% of bacteria on laundry
through high temperature.
Protocol P172
Sanitization Performance of Residential and
Commercial, Family Sized Clothes Washers
NOTE
y
This cycle has been certified by NSF using Tide
HE powder.
Bright Whites™
: White Fabrics
This cycle is for washing white items only.
Bulky/Large
: Blankets or Bulky Items
This cycle is for washing blankets or bulky items.
Cotton/Normal
: Normal Items
Use this cycle to wash all normal items, except
delicate fabrics such as wool or silk.
NOTE
y
If you press
A
and then
C
without selecting
another cycle, the washing machine proceeds
to Cotton/Normal.
25
ENGLISH
OPERATION
Cycle Modifier Buttons
Each cycle has preset settings that are selected
automatically. You may also customize the settings
using the cycle modifier buttons. Press the button for
that option to view and select other settings.
The washer automatically adjusts the water level for
the type and size of wash load for best results and
maximum efficiency. It may seem there is no water
inside the drum in some cycles, but this is normal.
NOTE
y
To protect your garments, not every wash/rinse
temperature, spin speed, soil level, or option is
available with every cycle. See the Cycle Guide
for details.
Setting Options Before Cycle
You can select and add the desired optional functions
before you start the washing machine.
Wash Temp.
Set the water temperature for the wash cycle. Set the
appropriate temperature, as specified in the fabric
care label.
1
Press
A
and turn
B
to the desired cycle.
2
Press repeatedly to select the desired
water
temperature:
- When an optional item is selected, an indication
light for the corresponding optional item turns
on.
3
Press the desired option button to use the other
options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press
C
.
NOTE
y
Cold rinses use less energy.
y
Your washer features a heating element to boost
the hot water temperature for Extra Hot settings.
This provides improved wash performance at
normal water heater settings.
y
Select the water temperature suitable for the
type of load you are washing. Follow the fabric
care label for best results.
Spin Speed
You can set the desired spin speed.
Use this feature properly according to the
characteristics of the load.
1
Press
A
and turn
B
to the desired cycle.
2
Press repeatedly to select the desired spin
speed.
- When an optional item is selected, an indication
light for the corresponding optional item turns
on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press
C
.
NOTE
y
The Spin Speed button also activates the Drain
& Spin cycle to drain the tub and spin clothes;
for example, if you want to remove clothes
before the cycle has ended.
Soil Level
You can wash your laundry more thoroughly by
setting the proper soil level on the washing machine.
1
Press
A
and turn
B
to desired cycle.
2
Press repeatedly to select a soil level.
- When an optional item is selected, an indication
light for the corresponding optional item turns
on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press
C
.
NOTE
y
This feature needs more time for heavily soiled
loads or less time for lightly soiled loads.
26
OPERATION
Signal
The washing machine plays a melody when the
wash cycle is finished. The buttons make a sound
each time a button is pressed. Use this option to
adjust the volume of the melody and button tones.
1
Press
A
.
2
Turn
B
to the desired cycle.
3
Press . Adjust the melody and button tones
as desired.
4
Press the desired option to use the other options.
5
Press
C
.
Prewash
Prewash for 15 minutes when clothes are covered in
dirt or dust. This feature is suitable for heavily soiled
items.
1
Press
A
and turn
B
to the desired cycle.
2
Press
.
- light will turn on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press
C
.
Rinse+Spin
Use this cycle to rinse detergent from load.
1
Press
A
and turn
B
to the desired cycle.
2
Press .
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press
C
.
Drum Light
The drum is equipped with a white LED light that
illuminates when the washer is turned on. This light
automatically turns off when the door is closed and
the cycle starts. To turn on the light during a cycle.
1
Press
A
and turn
B
to the desired cycle.
2
Press
C
.
3
Press and hold
for 3 seconds during the
wash cycle.
- The drum light will illuminate and then turn off
automatically after 4 minutes.
- Clothes and the gasket may look like yellow due
to lights of the lamp, but it is normal.
Fresh Care
Use this function when you are not able to take out
your clothes as soon as the wash cycle ends.
This function provides periodic tumbling for up to
about 19 hours to prevent wrinkles. Press the Start/
Pause or Power button to unload laundry at any
time.
1
Press
A
and turn
B
to the desired cycle.
2
Press and hold for 3 seconds during the
wash cycle.
- light will turn on.
3
Select any desired options.
- Skip to step 4 if you would like to use the default
settings without changing or adding any options.
4
Press
C
.
Extra Rinse
You can add an extra rinse cycle to the default rinse
cycle.
1
Press
A
and turn
B
to the desired cycle.
2
Press .
- light will turn on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press
C
.
27
ENGLISH
OPERATION
Delay Wash
You can set the desired start time.
1
Press
A
and turn
B
to the desired cycle.
2
Press the desired option to use the other options.
3
Press
repeatedly to select the desired start
time.
-
light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay time
by one hour, up to 19 hours.
4
Press
C
.
Steam
Adding the Steam option to these cycles help to
enhance washing performance.
By using a hot steam fabrics get the cleaning benefits
of a super hot wash.
1
Press
A
and turn
B
to the desired cycle.
2
Press . The washer will automatically
adjust the cycle settings.
3
Set any other desired options.
4
Press
C
.
WARNING
y
Do not touch the door during steam cycles.
The
door surface can become very hot. Allow the
door lock to release before opening the door.
y
Do not attempt to override the door lock
mechanism or reach into the washer during a
steam cycle.
Steam can cause severe burns.
NOTE
y
The steam option cannot be used with all cycles.
y
Steam may not be clearly visible during the
steam cycles. This is normal. Too much steam
could damage clothing.
y
Do not use steam with delicate fabrics such as
wool, silk, or easily discolored fabrics.
Cold Wash™
Adding the Cold Wash™ option reduces energy
usage and provides the same washing performance
as a warm water wash.
By using 6 different washing motion (Tumbling,
Rolling, Stepping, Scrubbing, Swing, Filtration),
fabrics get the cleaning benefits, without the energy
usage.
1
Press
A
and turn
B
to the desired cycle.
2
Press . The washer will automatically
adjust
the cycle settings.
3
Set any other desired options.
4
Press
C
.
NOTE
y
When you select the Cold Wash™ option, wash
time will be increased up to 10 minutes.
y
For high wash efficiency, it is recommended to
use less than 8 pounds.
Turbo Wash™
Adding the Turbo Wash™ option reduces cycle time
and provides good performance in normal cycle.
By using the Turbo Wash™, We can save the time
without sacrificing performance.
1
Press
A
and turn
B
to the desired cycle.
2
Press . The washer will automatically
adjust
the cycle settings.
3
Set any other desired options.
4
Press
C
.
NOTE
y
The Turbo Wash™ option cannot be used with
all cycles.
y
Turbo Wash™ is available in the beginning of
the Cotton/Normal and Perm. Press cycles.
y
Press and hold the Turbo Wash™ button to
change the default settings.
28
OPERATION
Setting Options During Cycle
You can add the desired options during the wash
cycle.
Child Lock
This feature locks the controls to prevent children or
others from changing the cycle settings by pressing
the buttons during the cycle. The feature does not
lock the door.
Enabling Child Lock
Press and hold for 3 seconds during the wash
cycle.
- When Child Lock is enabled, a
N
message and the
remaining wash time are displayed, in turn, on the
display panel of the washing machine.
Disabling Child Lock
Press and hold for 3 seconds during the wash
cycle.
NOTE
y
Once the washer has shut off, the Power button
allows the machine to be turned on, but the
controls are still locked. Press and hold the
Rinse + Spin button for 3 seconds to disable
Child Lock.
Add Garments
Use this function to add garments or remove foreign
objects like coins or keys after the cycle has started.
1
Press . The cycle pauses and the door
unlocks.
2
Open the door, add garments or remove foreign
objects, and close the door.
3
Press
C
to restart the cycle. The cycle continues
automatically.
NOTE
y After checking the water level/temperature
conditions for safety, the door unlocks once the
wash movement has stopped . (Door Lock LED
turns off.)
- This may take several seconds depending on
the water level. When a lot of water is in the
tub, the door unlocks after water drains to a
safe level.
- If the temperature in the tub is higher than
113°F (45°C), a short warning chime sounds
and Add Garments is NOT allowed for safety.
y Add Garments is disabled during the Tub Clean
cycle for safety.
y To preserve wash performance, wash time may
be extended depending on when garments are
added to a cycle.
WARNING
y
Be careful when opening the door as wet laundry
may drip or fall out when the door is opened.
y
Do not attempt to force the door to open when
locked. Doing so could result in damage to the
machine, malfunction, or personal injury.
y
Make sure the area around the door seal is clear
before closing the door. If laundry gets caught
between the door and the seal, it can damage the
rubber gasket and may result in leaking.
29
ENGLISH
MAINTENANCE
Regular Cleaning
Care After Wash
After the cycle is finished, wipe the door and the
inside of the door seal to remove any moisture.
Leave the door open to dry the washer tub interior.
Wipe the body of the washing machine with a dry
cloth to remove any moisture.
WARNING
y
Unplug the washer before cleaning to avoid
the risk of electric shock.
Failure to follow this
warning can cause serious injury, fire, electric
shock or death.
y
Never use harsh chemicals, abrasive cleaners, or
solvents to clean the washer.
They will damage the
finish.
y
Do not use volatile substances (benzene, paint
thinner, alcohol, acetone, etc.) or detergents
with strong chemical components when cleaning
the washing machine.
Doing so may cause
discoloration or damage to the machine, or it
may cause a fire.
Care in Cold Climates
Long-Term Storage
Follow these instructions when storing the washer
for an extended period where it might be exposed to
freezing temperatures.
1
Turn off the faucets connected with the water
lines.
2
Unscrew the water lines from back of the washer.
3
Empty any water out of the water lines.
4
Press
A
.
5
Open the door and add 1 gallon (3.8 L) of nontoxic
recreational vehicle (RV) antifreeze to the empty
washer tub. DO NOT use automotive anti-freeze.
Close the door.
6
Press for draining and spinning.
MAINTENANCE
7
Press
C
.
- Drain the water from the washing machine for
1 minute. Not all of the RV antifreeze will be
expelled.
8
Press
A
to turn off the washing machine and pull
out the power plug.
9
Dry the tub interior of the washer tub with a soft
cloth, and close the door.
10
Press down hard on the disengage button and
pull out the detergent dispenser drawer.
11
Drain the water from the detergent dispenser
drawer and dry out each compartment.
12
Store the washing machine in an upright position.
NOTE
y
To remove the antifreeze after storing the
washing machine, add detergent to the
dispenser, and run one cycle. Do not load any
laundry at this time.
Thawing Frozen Water Lines
1
Turn off the faucets connected with the water
lines.
2
Pour hot water on the frozen faucets to thaw the
water lines and pull them out.
3
Immerse the water lines in hot water to thaw
them.
4
Connect the water lines with the water inlets of
the washing machine and faucets.
- See page 14,
Connecting the water lines
for
details.
5
Turn on the faucets.
6
Press
A
.
7
Press .
8
Press
C
.
- Verify the water fills properly.
30
MAINTENANCE
Thawing Frozen Drain Lines
1
Pour hot water in the washer tub and close the
door.
- Leave it for 10 minutes.
2
Press
A
after 10 minutes.
3
Press
for draining and spinning.
4
Press
C
.
- Check if the water drains.
Cleaning
Periodically clean the washing machine to help
maintain its performance and to minimize the chance
of malfunction.
Tub Clean
“Improper installation or use of the washing
machine in a humid space for a long period of time
potentially could lead to a buildup of detergent
residue in the washing machine that may produce
mildew or musty smells. If you clean the washer tub
regularly on a monthly basis using Tub Clean it will
minimize the possibility that detergent residue will
build up and mildew or musty smells may occur.”
1
Add tub cleaner or lime scale remover into the
detergent dispenser drawer.
- Do not exceed the maximum detergent limit line
when you add it. Detergent may remain in the
washer tub after cleaning.
-
When you use liquid chlorine bleach,
load it into
the liquid chlorine bleach compartment.
-
When you use a powdered cleaner,
pull out the
liquid detergent cup and add it into the main
wash detergent compartment.
-
When you use cleaning tablets,
place them directly
into the washer tub. (Do not add tablet cleaner to
the drawer.)
2
Press
A
.
3
Turn
B
to Tub Clean.
-
O
message appears in the display.
- The indication light for Tub Clean turns on.
4 Press
C
.
NOTE
y
Never load laundry while using Tub Clean. The
laundry may be damaged. Make sure to clean
the washer tub when it is empty.
y
It is recommended to leave the door open after
finishing the laundry to keep the tub clean.
y
It is recommended that Tub Clean should be
repeated monthly.
y
If you notice mildew or musty smells, run Tub
Clean for 3 consecutive weeks.
y
Safely and conveniently secure the door slightly
ajar with a magnetic door plunger. This will
promote air circulation and help the machine to
dry.
31
ENGLISH
MAINTENANCE
Automatic Alert
When the power is on and the
O
message blinks,
it means the washer tub needs cleaning. Use Tub
Clean to clean the washer tub. The automatic
indication alert for cleaning the washer tub depends
on the frequency of use, however, the message will
generally blink every 1~2 months.
Removing Mineral Buildup
If you live in an area with hard water, mineral scale
can form on the internal components of the washing
machine. Take extra care to periodically clean the
mineral buildup on the internal components to
extend the lifespan of the washing machine.
Check if the descaler is suitable for cleaning the
washer tub before using it and run the Tub Clean
cycle. See page 30,
Tub Clean,
for details on tub
clean.
NOTE
y
In areas with hard water, it is recommended to
use a water softener.
y
Make sure to remove all loads from the washer
tub before cleaning the washer tub. Cleaning
the washer tub together with a load may result
in contamination of or damage to the laundry.
Removing Lime Buildup on Stainless Steel
Wipe lime buildup or other spots on stainless steel
with a soft cloth soaked in stainless steel cleaner.
NOTE
y
Never use steel wool or abrasive cleansers. Doing so
may damage the washing machine.
Cleaning the Detergent Dispenser
Drawer
Leaving detergent in the detergent dispenser drawer
for an extended period of time or using the washing
machine for a long period of time may cause the
build-up of scales in the detergent dispenser drawer.
Pull out and clean the detergent dispenser drawer
once a week.
1
Pull out the detergent dispenser drawer.
2
Press down hard on the disengage button and
pull out the detergent dispenser drawer.
3
Remove the inserts from the drawer.
4
Clean them with warm water.
- Use a soft cloth or brush for cleaning and
remove any residue.
5
Wipe any moisture with a dry towel or cloth after
cleaning.
6
Replace the detergent dispenser drawer.
WARNING
y
Do not spray water inside the washing machine.
Doing so may cause fire or electric shock.
NOTE
y
Use water only when you clean the detergent
dispenser drawer. Make sure to use Rinse+Spin
to rinse the washer tub before the wash cycle
when you use a cleaning detergent to clean the
washer tub.
32
MAINTENANCE
WARNING
y
Unplug the power cord and turn off the faucets
before cleaning.
Failure to do so may cause
electric shock.
y
Do not use the washing machine without the
inlet filters.
If you use the washing machine
without the inlet filters it will cause leaks and
malfunction.
y
If you use the washing machine in an area with
hard water, the inlet filter may clog due to lime
buildup. Contact your nearest LG customer
service center if the inlet filter is not clean or is
missing.
NOTE
y
P
message will blink on the display when the
water pressure in the detergent drawer is weak
or an inlet filter is clogged with dirt. Clean the
inlet filter.
Cleaning the Water Inlet Filters
Clean the water inlet filters periodically to prevent
clogging. Take extra care to clean the water inlet filters for
areas using hard water. Water may not be supplied if there
are foreign objects, such as rust, sand, or stones in the
water inlet filters.
1
Press
A
to turn off the washing machine and
pull out the plug.
2
Turn off the faucets connected with the water
inlets.
3
Remove the water inlets.
4
Pull out the water inlet filter.
Inlet Filter
5
Remove foreign objects from the water filter inlet.
- Soak the water filter inlets in white vinegar or
a lime scale remover or use a toothbrush to
remove foreign objects and rinse thoroughly.
6
Press the water filter inlets back into place.
7
Reattach the water lines to the washing machine.
33
ENGLISH
MAINTENANCE
Cleaning the Drain Pump Filter
The washing machine fails to drain if the drain pump
filter is clogged. Periodically clean the drain filter to
prevent clogging with foreign objects.
1
Press
A
to turn off the washing machine and
pull out the plug.
2
Open the drain pump filter cover.
3
Unclip the drain hose and remove the plug from
the drain hose to drain the remaining water.
4
Twist the pump filter counterclockwise to remove.
5
Clean the pump filter and opening.
6
Recap the plug onto the drain hose and reattach
the drain hose.
7
Insert the drain pump filter.
8
Close the drain pump filter cover.
WARNING
y
Make sure to pull out the plug before cleaning.
Failure to do so may cause electric shock.
y
Opening the drain filter will result in water
overflowing if there is water in the washer tub.
Make sure to check if the water is completely
drained before opening the drain filter.
y
If you use the washing machine with the drain
filter reassembled incorrectly after cleaning it,
or if you use the machine without the filter, it
may cause leaks or malfunction of the washing
machine.
NOTE
y
Q
message will blink when the drain pump
filter is clogged with dirt. Clean the drain pump
filter.
34
MAINTENANCE
Cleaning the Door Seal
Clean the door seal once a month to prevent build-
up of dirt in the door seal.
1
Wear rubber gloves and protective goggles.
2
Dilute 3/4 cup (177 ml) of liquid chlorine bleach in
1 gallon (3.8 L) of water.
3
Soak a sponge or a soft cloth in this diluted
solution and wipe down all around the door seal.
4
Wipe any moisture with a dry towel or cloth after
cleaning.
5
Leave the door open to allow the door seal to dry
completely.
CAUTION
y
Cleaning the door seal with undiluted bleach
may cause malfunction of the door seal and
washing machine parts. You must add water to
the bleach before using it.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

LG Electronics WM8100HVA User manual

LG Electronics
Brand
LG Electronics
Model
WM8100HVA
Category
Washing machines
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents