Assembly Instruction
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
Customer Support
NEED HELP? For help with assembly, or if you are missing a
part, please call Furinno Customer Service, 1-773-299-8111
from Mon-Fri, 9am-5pm (CST) or email: [email protected]
www.furinno.com
Attach Square Leg(3)to Panel(B) and tighten it.
STEP 3
Recommended Maximum Weight
Furinno Set of Two End Table
1212720140709
12127 (2 in 1)
*Unit in Pound(lbs)
10
10
No Tools Required
Recomm. 1 Person
Approx. 10 minutes
STEP 2
Attach Square Pole(1) to Panel(A) and tighten it.
STEP 1
Fix Insert Cap(2)into Panel(A) by using rubber mallet.
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
8pcs
8pcs
8pcs
A 2pcs
Top Panel
Square Leg
No Hardware List Qty No QtyParts List
SQ.Long Pole
Insert Cap
B 2pcs
Shelf Panel
Note: All hardware quantity are for two set.
-
1
-
2
Furinno 12127GYW/BK Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Furinno 17046 Installation guide
-
-
-
-
-
-
-
-
-