Hillsdale Furniture 4142-888 Installation guide

Type
Installation guide
MONACO NESTING TABLES
Model #101885-104969 (4142-888) 3 Tables, Sm. Med. Lg.
PARTS LIST
(2) Leg Panels
(1) Leg Support
(1) Table Top
E
F
G
HARDWARE LIST
(30) Allen Bolts 1/4” x 5/8”
(30) Spring Washer 1/4”
(30) Flat Washer 1/4”
(1) Allen Wrench 1/4”
A
B
C
D
A B C D
* These components
come in three sizes:
Small, Medium & Large.
IMPORTANT: Before assembly
begins, match each same size
component with one another to
prevent using wrong parts during
assembly.
STEP 1
Begin assembly by attaching each
Leg Support (F) to the inside of
each same size Leg Panel (E) by
aligning with the hole on each metal
bracket and securing with 1 Allen
Bolt (A), 1 Spring Washer (B) & 1
Flat Washer (C) per each end.
Tighten all bolts using the Allen
Wrench (D) that has been provided.
A
B
C
A
B
C
A
B
C
G
F
E
E
Small
Medium
Large
STEP 2
Attach each Table Top (G) to
the top of each same size Leg
Panels (E) by aligning holes
and securing with 2 Allen Bolts
(A), 2 Spring Washers (B) & 2
Flat Washers (C) per each
corner. Tighten all bolts. The
assembly is now complete.
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 02-08-2017
Page 1 of 1
CARE & MAINTENANCE
:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
  • Page 1 1

Hillsdale Furniture 4142-888 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI