Allied Brass PR-5/16TB-PB Installation guide

Type
Installation guide
Q
13.50
CARD-58 CAP
ANCHOR
DRILLED
HOLE
THREAD
INSERT
SCREW
DETAILED Q
Step 1:
Determine your desired location for installation and make a mark for the location . Make 2 marks where mounting screws will
be placed as shown below. Make sure shelf is level when marking for location of installation.Drill hole at each end of the
marks.
Drill holes in Wall for screw anchors
Attach Shelf to mounting Surface.
Step 2:
PR-5-16TB
INSTALLATION INSTRUCTIONS
No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.
  • Page 1 1

Allied Brass PR-5/16TB-PB Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI