Pure Acoustics BQ 360, BQ260, BQ450 User manual

Hello! I am an AI chatbot trained to assist you with the Pure Acoustics BQ 360 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Take the cardboard template that comes with the speakers and

place it where you want the speaker to be mounted.

Draw around the template and cutout the speaker mounting hole.

Run quality speaker wire (12-16 gauge ) to that location.

Carefully pry off the grill from the speaker either using a small

screwdriver at the edge of the grill or with a small awl catching the

grill by one of its holes.

Connect the speaker wire to the speaker terminals and insert the

speaker into the hole.

There are screws around the perimeter of the face of the speaker

(6 on the inwalls). These screws connect to ‘wings’ in the rear of the

speaker which will swing out and clamp the speaker to the wall as they

are tightened.Secure the speaker to the wall by tightening these screws

until the speaker is securely mounted.

Reattach grill.

That’ s It ! Enjoy !

In-wall Speakers

Cutout Dimension

BQ260: 183x183mm

BQ108: 247x247mm

BQ260/108