Shine Company 7604TO Installation guide

Back

Front

Step 1: Attach both & Front Legs to Top Panel using four (650 m/m)

Bolts with four Nuts. Attach & Back Legs to Top Panel using

four (650 m/m) Bolts with four Nuts.

Step 2: Use the included Wrench Tool to help hold the Nuts in place while screwing

the Bolts in from the other end. Tighten all Bolts & Nuts. Enjoy your new

ottoman!

PARTS INCLUDED:

8 PCS

Nuts

1 PC

Wrench

Tool

Top Panel

How To Assemble Your Ottoman (Rev. 03/2017)

8 PCS

Bolts

(650 m/m)

2 PC Bolts (650 m/m)

with

2 PC Nuts

2 PC Bolts (650 m/m)

with

2 PC Nuts

TOOLS NEEDED: Philips screwdriver, power drill optional

CAUTION: When assembling ottoman,

DO NOT completely tighten the bolts

and nuts until all the parts and holes are properly aligned.

Do not sit on ottomans.

Right Left

Front Legs

Back Legs