The Brighter Choice
SOLAR PATH LIGHTS
Install Guide and Manual
HOW TO GET THE MOST OUT OF YOUR SOLAR PATH LIGHTS
EASY INSTALLATION
SPECIFICATIONS TROUBLESHOOTING
Power Supply
Battery Capacity
6-8 hours (in sunlight)
8-10 hours (fully recharged)
Steel
1 year
Built-in Ni-Mh battery
600mAh
Working Time
Housing
Warranty
Charging Time
Switch the path light on and bring to a dark room. If the path
light still isn’t lighting up, then please allow the path light to
receive direct sunlight for a few hours (6-8 is best), then test
again in a dark room.
Check whether the battery is working.
Make sure the solar path light isn’t being obstructed by a tree,
bush, or building during the day. Additionally, ensure that the
path light isn’t under a light source at night such as a porch or
street light.
LIGHT WON’T TURN ON?
Attach Stake “A” Attach Stake “B” Final Assembly Turn on the switch
For the best results
place in full sun
Results in shorter
working time
Ready to charge
Stake into the ground
1.
2.
3.
Stake “A” Stake “B”
Allow the battery to charge for 6-8 hours before the first use.
In the event of extreme weather you will want to bring the path lights indoors.
For the best charge, ensure the solar panel stays clean.
1.
2.
3.
NOTE:
-
1
Sunco Lighting 12 Pack Solar Path Lights, Dusk-to-Dawn, 6000K, Cross Spike Stake for Easy in Ground Install, Solar Powered LED Landscape Lighting - RoHS/CE User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Harbor Freight Tools 93098 User manual
-
Hampton Bay CD0206-78HD Operating instructions
-
Kenroy Home 60631 Installation guide
-
One Stop Gardens 56680 Owner's manual
-
Portfolio 00735 Installation guide
-
-
-
Hampton Bay 29152 Installation guide
-
Hampton Bay 435616-41HD Installation guide
-
Luminar Outdoor 61444 Owner's manual
