DIRECT WICKER PAD-3233B-1, DWD-3233B-Brown, PAD-3233B, PAD-3233B-P Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the DIRECT WICKER PAD-3233B-1 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
TABLE ASSEMBLY INSTRUCTIONS . DIRECT WICKER
TABLE
ASSEMBLY INSTRUCTIONS
BEFORE YOU START ASSEMBLING YOUR
FURNITURE:
CHECK THAT YOU HAVE ALL THE
PIECES LISTED ON THE LEFT HAND
SIDE.
LAY A CLEAN SHEET ON A FLAT
SURFACE BIG ENOUGH TO ASSEMBLE
YOUR FURNITURE ON IN ORDER TO
PROTECT YOUR FURNITURE.
A
1
B
1
C
1
D
1
E
11
F
1
G
1
1.
Lay the tabletop (A) down so the frame is facing upwards.Withthe slit facing
upwards, attach chair legs (B), to the table top by aligning the screw holes
with thosein thetable top (A) . Insertscrews(E)throughthe washerandinto
theholesandlooselytightenwiththeallenkey(F).
Theninserttableleg(C)intopositionovertheslitoftableleg(B)andalignthe
screwholeswiththeholesinthetabletop(A).Insertscrews(E)throughthe
washerandintotheholesandlooselytightenwiththeallenkey(F)inthe
locationsshownintheimagebelow.
2.
Attach both the table legs together by placing the bracket (G) over the screw
holes on the bottomof table leg(B & C) as shown intheaboveimage and
inserting the three remaining screws (E) through the washers and into the
bracketandtablelegs.Fullytightenusingtheallenkey(F).
Fully tighten all of thescrews in the table usingthe allenkey (F) then place the
screwcapsoverallofthescrews.
TABLE ASSEMBLY INSTRUCTIONS . DIRECT WICKER
3.
Turnthetableuprightandplacethetemperedglass(D)
overthetabletop.
1/2