Kohler 410-K-NA Dimensions Guide

Category
Faucets
Type
Dimensions Guide
Features
Brass construction.
2.2 gal/min (8.3 l/min) maximum flow rate.
Dual control wall-mounted.
Ceramic disc valves.
Codes/Standards
ASME A112.18.1/CSA B125.1
NSF/ANSI 61
NSF/ANSI 372
All applicable US Federal and State material
regulations
DOE - Energy Policy Act 1992
KOHLER
®
Faucet Lifetime Limited
Warranty
See website for detailed warranty information.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-16-2018 02:46
Falling Water
®
Wall-mount Valve
K-410-K
4" (102 mm)
Notes
Technical Information
Install this product according to the installation
guide.
All product dimensions are nominal.
Faucet:
Three 1-5/8" (4.1 cm) diameter cutout holes are
required for the spout and handles.
2.2 gal/min (8.3 l/min)Flow rate:
Follow the installation dimensions precisely as
there is no deep roughing-in kit available for this
product.
WARNING: Risk of property damage. For exterior
wall installations, ensure proper wall insulation
to prevent frozen pipes.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-16-2018 02:46
Falling Water
®
Wall-mount Valve
K-410-K
  • Page 1 1
  • Page 2 2

Kohler 410-K-NA Dimensions Guide

Category
Faucets
Type
Dimensions Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI