PRODUCT OF
DO927BFK
Handleiding Koelkast en diepvries
Mode d’emploi Frigo et congélateur
Gebrauchsanleitung Kühlschrank und Gefrierschrank
Instruction booklet Refridgerator and freezer
Manual de instrucciones congelador
Lees aandachtig alle instructies - bewaar deze handleiding voor latere raadpleging.
Lisez attentivement les instructions - gardez le mode d’emploi pour utilisation ultérieur.
Lesen Sie genau die Anweisungen - bewahren Sie die Gebrauchsanleitung für spätere
heranziehung.
Read all instructions carefully - save this instruction manual for future reference.
Lea detenidamente todas las instrucciones - Conserve este manual para futura referencia.
budoucího nahlédnutí.
budúceho nahliadnutie.
NL Nederlands 3
FR Français 14
DE Deutsch 25
EN English 36
ES Espagnol 46
CZ 56
SK 66
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
10
DO927BFK
NL
1.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
2.
scharnier. Verplaats deze naar de andere kant.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
3.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
4.
scharnier. Verplaats deze naar de andere kant.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
5.
overeenkomstige positie aan de tegenovergestelde kant van de bodem.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
21
DO927BFK
www.domo-elektro.be
FR
CHANGEMENT DU SENS D’OUVERTURE DE LA PORTE
technicien.
débranché et vide. Il est recommandé d’utiliser un tournevis cruciforme et une clé (ces deux
outils ne sont pas fournis).
1.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
2.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
3.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
4.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
22
DO927BFK
FR
5.
l’appareil.
6.
5. Reverse the middle hinge. Screw the
middle hinge onto the opposite side of
the unit.
6. Carefully set the upper door back into
place, inserting in onto the middle hinge.
7. Insert the upper hinge and screw it
tightly to the top of the unit.
Middle hinge
Ensure the lower door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
Ensure the upper door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
4. Remove the lower screws and lower
hinge from the unit bottom. Reverse the
lower hinge, move and secure it with
the lower screws to the opposite side of
the unit bottom. Carefully set the lower
door back into place, inserting it onto the
lower hinge.
8. Put the hinge cover back.
9
INSTALLATION
LFC60W16_IB_160201_grace.indd 9 1/2/16 10:43 am
7.
Replacez la charnière et vissez-la.
5. Reverse the middle hinge. Screw the
middle hinge onto the opposite side of
the unit.
6. Carefully set the upper door back into
place, inserting in onto the middle hinge.
7. Insert the upper hinge and screw it
tightly to the top of the unit.
Middle hinge
Ensure the lower door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
Ensure the upper door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
4. Remove the lower screws and lower
hinge from the unit bottom. Reverse the
lower hinge, move and secure it with
the lower screws to the opposite side of
the unit bottom. Carefully set the lower
door back into place, inserting it onto the
lower hinge.
8. Put the hinge cover back.
9
INSTALLATION
LFC60W16_IB_160201_grace.indd 9 1/2/16 10:43 am
8.
replacez le cache de protection.
5. Reverse the middle hinge. Screw the
middle hinge onto the opposite side of
the unit.
6. Carefully set the upper door back into
place, inserting in onto the middle hinge.
7. Insert the upper hinge and screw it
tightly to the top of the unit.
Middle hinge
Ensure the lower door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
Ensure the upper door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
4. Remove the lower screws and lower
hinge from the unit bottom. Reverse the
lower hinge, move and secure it with
the lower screws to the opposite side of
the unit bottom. Carefully set the lower
door back into place, inserting it onto the
lower hinge.
8. Put the hinge cover back.
9
INSTALLATION
LFC60W16_IB_160201_grace.indd 9 1/2/16 10:43 am
9.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
32
DO927BFK
DE
REINIGUNG
1. Ziehen Sie den Stecker aus der Steckdose.
2. Entnehmen Sie die Lebensmittel und bewahren Sie diese an einem kühlen Ort auf.
3.
4.
5.
Reinigungsmittel.
6.
gründlich ab.
7. Stecken Sie den Stecker nach der Reinigung in die Steckdose und stellen Sie den
Temperaturregler erneut in der gewünschten Temperatur ein.
8. Legen Sie die Lebensmittel wieder in das Gerät.
ÖFFNUNGSRICHTUNG DER TÜR ÄNDERN
anerkannten Fachmann zu kontaktieren und ihn diese Arbeiten durchführen zu lassen. Bevor
einen Maulschlüssel zu verwenden (beide nicht im Lieferumfang enthalten).
1. Entfernen Sie die Abdeckung der Schrauben. Entfernen Sie die Schrauben und
hoch und legen Sie diese zur Vermeidung von Kratzern auf einen weichen Untergrund.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
2.
des Scharniers. Versetzen Sie diese auf die andere Seite.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
33
DO927BFK
www.domo-elektro.be
DE
3.
an der anderen Seite ein. Heben Sie die Tür hoch und legen Sie diese zur Vermeidung von
Kratzern auf einen weichen Untergrund.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
4.
eine Abdeckung. Versetzen Sie diese auf die andere Seite.
des Scharniers. Versetzen Sie diese auf die andere Seite.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
5.
Entfernen Sie den Stellfuß der anderen Seite vom Boden und setzen Sie ihn an der
entsprechenden Position an der gegenüberliegenden Seite am Boden wieder ein.
6.
gegenüberliegenden Seite des Bodens.
5. Reverse the middle hinge. Screw the
middle hinge onto the opposite side of
the unit.
6. Carefully set the upper door back into
place, inserting in onto the middle hinge.
7. Insert the upper hinge and screw it
tightly to the top of the unit.
Middle hinge
Ensure the lower door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
Ensure the upper door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
4. Remove the lower screws and lower
hinge from the unit bottom. Reverse the
lower hinge, move and secure it with
the lower screws to the opposite side of
the unit bottom. Carefully set the lower
door back into place, inserting it onto the
lower hinge.
8. Put the hinge cover back.
9
INSTALLATION
LFC60W16_IB_160201_grace.indd 9 1/2/16 10:43 am
7.
bevor Sie das mittlere Scharnier vollständig festziehen. Setzen Sie das Scharnier wieder
ein und schrauben Sie es fest.
5. Reverse the middle hinge. Screw the
middle hinge onto the opposite side of
the unit.
6. Carefully set the upper door back into
place, inserting in onto the middle hinge.
7. Insert the upper hinge and screw it
tightly to the top of the unit.
Middle hinge
Ensure the lower door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
Ensure the upper door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
4. Remove the lower screws and lower
hinge from the unit bottom. Reverse the
lower hinge, move and secure it with
the lower screws to the opposite side of
the unit bottom. Carefully set the lower
door back into place, inserting it onto the
lower hinge.
8. Put the hinge cover back.
9
INSTALLATION
LFC60W16_IB_160201_grace.indd 9 1/2/16 10:43 am
Page is loading ...
Page is loading ...
36
DO927BFK
EN
WARRANTY
Dear client
+32 14 21 71 91 [email protected]
Monday – Thursday: 8.30 – 12.00 and 13.00 – 17.00
Friday: 8.30 – 12.00 and 13.00 – 16.30
This appliance has a two year warranty period. During this period the manufacturer is
failures occur the appliance will be repaired or replaced if necessary. The warranty will not be
or repairs executed by a third party. The guarantee is issued with the original till receipt. All
together with your receipt to the shop where you purchased it.
The guarantee on accessories and components that are liable to wear-and-tear is only 6
months.
The guarantee and responsibility of the supplier and manufacturer lapse automatically in the
following cases:
· If the instructions in this manual have not been followed.
·
·
·
· In case of repairs or alterations to the device by the consumer or non-authorised third
parties.
· If the customer used parts or accessories that are not recommended or provided by the
37
DO927BFK
www.domo-elektro.be
EN
SAFETY INSTRUCTIONS
READ THE INSTRUCTION BOOKLET CAREFULLY BEFORE USING THE APPLIANCE.
·
· This appliance is suitable to be in an household environment and in similar surroundings
such as :
·
· Farms
· Hotel or motel rooms and other surroundings with a residential character
· Guest rooms or similar
·
lack of experience and knowledge. On the condition that these persons have received the
necessary instruction on how to use this appliance in a safe way and they must also know
the dangers that can occur in using this appliance.
· Children cannot be allowed to play with the appliance.
·
year old.
·
and when replacing parts.
·
· Attention : This appliance can not be used with external timer or separate remote control.
·
· Keep the appliance and the power supply away from children under 16 years.
· Do not use an extension cord. Use an exclusive wall outlet. Do not connect your
refrigerator to extension cords or together with any other appliance in the same wall
outlet. Do not splice the cord.
·
reduces the risk of electrical shock by providing an escape wire for the electrical current.
·
·
·
a hazardous situation.
· An empty refrigerator is a very dangerous attracti
it harmless.
38
DO927BFK
EN
PARTS
1. Temperature control knob
2. Shelves
3. Cover for vegetable container
4. Vegetable container
5. Door shelves
6. Freezer drawers
7. Levelling feet
BEFORE THE FIRST USE
·
cabinet.
·
·
·
nearby will cause higher electricity consumption.
·
·
voltage could damage the appliance.
· The appliance must be grounded. The manufacturer is not responsible for damages that
may occur as a result of usage without grounding.
·
·
can settle.
· Allow the appliance to run empty for 24 hours so the compartment can cool to the
appropriate temperature.
· This appliance is designed to operate in ambient temperature between 16°C and 38°C.
correctly.
· The appliance may only be used indoors.
· The freezer makes noise when the compressor pumps the coolant. This is normal.
6
1
2
3
4
5
7
39
DO927BFK
www.domo-elektro.be
EN
USE
TEMPERATURE CONTROL
Refrigerator
The refrigerator is regulated by a temperature regulator that is located inside the appliance.
Set the regulator at the desired position.
· FAST COOL: this function can be used if a lot of food has to be cooled in the refrigerator at
2.5 hours. The refrigerator then automatically switches to the previously set temperature.
·
the door is opened and the temperature of the room the fridge is located in.
·
Freezer
The temperature setting for the freezer is located behind the
coldest.
STORING FOOD IN THE FRIDGE
The fridge helps to extend the storage times of fresh perishable foods.
Fresh food care for best results:
·
· Ensure that food is well wrapped or covered before it is stored. This will prevent food from
also prevent odour transfer.
· Make sure that strong smelling foods are wrapped or covered and stored away from foods
· Cool hot foods down before placing them in the fridge.
40
DO927BFK
EN
FREEZING AND STORING FOOD IN THE FREEZER
Use the freezer
· To store deep-frozen food.
· To make ice cubes.
· To freeze food.
Note: Ensure that the freezer door has been closed properly. Avoid opening the freezer
drawers unnecessarily.
Purchasing frozen food
· Packaging must not be damaged.
·
·
Freezing fresh food
Note: Keep food to be frozen away from food which is already frozen.
·
·
Packing frozen food
1. Place food in packaging.
2. Remove air.
3. Seal the wrapping.
4. Label packaging with contents and dates of freezing.
containers.
41
DO927BFK
www.domo-elektro.be
EN
Recommended storage times of frozen food in the freezer
These times vary depending on the type of food. The food that you freeze can be preserved
from 1 to 12 months (minimum at -18°C).
Food Storage time
1 month
2 months
3 months
4 months
-
6 months
12 months
Never forget:
·
them before the expiry of this date.
·
completely must not be refrozen.
·
POWER FAILURE
·
blacking dry ice on top of packages.
·
· Do not refreeze frozen foods that have thawed completely. The food may be dangerous to
eat.
MOVING YOUR APPLIANCE
·
·
standing upright for at least 10 minutes before turning on.
42
DO927BFK
EN
Your appliance uses isobutane (R600a) as a refrigerant. Although R600a is an environmentally
installation to prevent your appliance’s cooler elements from being damaged. In the event of
sources and ventilate the room where the appliance is located for a few minutes.
CLEANING
Do not use abrasive cleaning agents or solvents.
1. Disconnect the mains plug from the mains socket.
2. Take out the food and store in a cool location.
3.
can be placed in the freezer.
4.
5.
6.
7.
8. Put the food back into the appliance.
DOOR CONVERSION
1. Remove the cover plate of the screws. Remove the three screws and then the upper
prevent scratching.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
2.
Move this to the other side.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
43
DO927BFK
www.domo-elektro.be
EN
3.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
4.
this to the other side.
Move this to the other side.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
5.
position on the opposite side of the base.
6.
5. Reverse the middle hinge. Screw the
middle hinge onto the opposite side of
the unit.
6. Carefully set the upper door back into
place, inserting in onto the middle hinge.
7. Insert the upper hinge and screw it
tightly to the top of the unit.
Middle hinge
Ensure the lower door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
Ensure the upper door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
4. Remove the lower screws and lower
hinge from the unit bottom. Reverse the
lower hinge, move and secure it with
the lower screws to the opposite side of
the unit bottom. Carefully set the lower
door back into place, inserting it onto the
lower hinge.
8. Put the hinge cover back.
9
INSTALLATION
LFC60W16_IB_160201_grace.indd 9 1/2/16 10:43 am
7. Carefully replace the bottom part of the door into position. Make sure that the door is
aligned horizontally as well as vertically so that the seal is closed on all sides before you
tighten the centre hinge completely. Return the hinge to its positions and fasten it.
5. Reverse the middle hinge. Screw the
middle hinge onto the opposite side of
the unit.
6. Carefully set the upper door back into
place, inserting in onto the middle hinge.
7. Insert the upper hinge and screw it
tightly to the top of the unit.
Middle hinge
Ensure the lower door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
Ensure the upper door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
4. Remove the lower screws and lower
hinge from the unit bottom. Reverse the
lower hinge, move and secure it with
the lower screws to the opposite side of
the unit bottom. Carefully set the lower
door back into place, inserting it onto the
lower hinge.
8. Put the hinge cover back.
9
INSTALLATION
LFC60W16_IB_160201_grace.indd 9 1/2/16 10:43 am
44
DO927BFK
EN
8.
replace the cover plate.
5. Reverse the middle hinge. Screw the
middle hinge onto the opposite side of
the unit.
6. Carefully set the upper door back into
place, inserting in onto the middle hinge.
7. Insert the upper hinge and screw it
tightly to the top of the unit.
Middle hinge
Ensure the lower door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
Ensure the upper door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
4. Remove the lower screws and lower
hinge from the unit bottom. Reverse the
lower hinge, move and secure it with
the lower screws to the opposite side of
the unit bottom. Carefully set the lower
door back into place, inserting it onto the
lower hinge.
8. Put the hinge cover back.
9
INSTALLATION
LFC60W16_IB_160201_grace.indd 9 1/2/16 10:43 am
9.
and that the seal closes on all sides before you tighten the upper hinge completely. If
TROUBLE SHOOTING
shooting guide for a possible solution.
Does not work
· Check connection of power cord to power source.
· Plug in unit
· Use proper voltage.
Cools too frequently
·
· Close door securely.
· Be sure that food is cool before inserting.
· Do not keep door open for too long and MINIMIZE door openings.
· Do not place unit close to heat sources Or direct sunlight.
Intemal temperature not cold enough
· Check connection of power cord to Power source.
· Plug in unit
·
· Close door securely.
· Be sure that food is cool before inserting.
·
· Allow room for airto circulate around unit..
· Use proper voltage.
· Do not place unit close to heat sources or direct sunlight.
45
DO927BFK
www.domo-elektro.be
EN
Freezer is not cold enough
·
· Close door securely.
· Be sure that food is cool before inserting.
· Do not keep door open for too long.
· Use proper voltage.
ENVIRONMENTAL GUIDELINES
This symbol on the product or on its packaging indicates
that this product may not be treated as household waste.
Instead it must be brought to the applicable collection point
inappropriate waste handling of this product. For more
service or the shop where you purchased the product.
The packaging is recyclable. Please treat the packaging
ecologically.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
53
DO927BFK
www.domo-elektro.be
ES
2.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
3.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
4.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
5.
correspondiente en el lado opuesto de la parte inferior.
6.
inferior.
5. Reverse the middle hinge. Screw the
middle hinge onto the opposite side of
the unit.
6. Carefully set the upper door back into
place, inserting in onto the middle hinge.
7. Insert the upper hinge and screw it
tightly to the top of the unit.
Middle hinge
Ensure the lower door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
Ensure the upper door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
4. Remove the lower screws and lower
hinge from the unit bottom. Reverse the
lower hinge, move and secure it with
the lower screws to the opposite side of
the unit bottom. Carefully set the lower
door back into place, inserting it onto the
lower hinge.
8. Put the hinge cover back.
9
INSTALLATION
LFC60W16_IB_160201_grace.indd 9 1/2/16 10:43 am
54
DO927BFK
ES
7.
por todos los lados antes de unir completamente la bisagra central. Vuelva a colocar la
bisagra y atorníllela.
5. Reverse the middle hinge. Screw the
middle hinge onto the opposite side of
the unit.
6. Carefully set the upper door back into
place, inserting in onto the middle hinge.
7. Insert the upper hinge and screw it
tightly to the top of the unit.
Middle hinge
Ensure the lower door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
Ensure the upper door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
4. Remove the lower screws and lower
hinge from the unit bottom. Reverse the
lower hinge, move and secure it with
the lower screws to the opposite side of
the unit bottom. Carefully set the lower
door back into place, inserting it onto the
lower hinge.
8. Put the hinge cover back.
9
INSTALLATION
LFC60W16_IB_160201_grace.indd 9 1/2/16 10:43 am
8.
colocar la chapita.
5. Reverse the middle hinge. Screw the
middle hinge onto the opposite side of
the unit.
6. Carefully set the upper door back into
place, inserting in onto the middle hinge.
7. Insert the upper hinge and screw it
tightly to the top of the unit.
Middle hinge
Ensure the lower door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
Ensure the upper door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
4. Remove the lower screws and lower
hinge from the unit bottom. Reverse the
lower hinge, move and secure it with
the lower screws to the opposite side of
the unit bottom. Carefully set the lower
door back into place, inserting it onto the
lower hinge.
8. Put the hinge cover back.
9
INSTALLATION
LFC60W16_IB_160201_grace.indd 9 1/2/16 10:43 am
9.
PROBLEMAS Y SUS SOLUCIONES
ponerse en contacto con nuestro servicio de posventa.
El aparato no funciona.
Asegúrese de insertar el enchufe en la toma de corriente.
El frigoríco rebota frecuentemente.
intensidad para enfriarla.
La puerta ha estado abierta demasiadas veces o durante demasiado tiempo.
El aparato está demasiado cerca de una fuente de calor o está expuesto directamente a la luz
solar.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
63
DO927BFK
www.domo-elektro.be
CZ
3.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
4.
druhou stranu.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8 1/2/16 10:43 am
5.
6.
5. Reverse the middle hinge. Screw the
middle hinge onto the opposite side of
the unit.
6. Carefully set the upper door back into
place, inserting in onto the middle hinge.
7. Insert the upper hinge and screw it
tightly to the top of the unit.
Middle hinge
Ensure the lower door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
Ensure the upper door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
4. Remove the lower screws and lower
hinge from the unit bottom. Reverse the
lower hinge, move and secure it with
the lower screws to the opposite side of
the unit bottom. Carefully set the lower
door back into place, inserting it onto the
lower hinge.
8. Put the hinge cover back.
9
INSTALLATION
LFC60W16_IB_160201_grace.indd 9 1/2/16 10:43 am
7.
5. Reverse the middle hinge. Screw the
middle hinge onto the opposite side of
the unit.
6. Carefully set the upper door back into
place, inserting in onto the middle hinge.
7. Insert the upper hinge and screw it
tightly to the top of the unit.
Middle hinge
Ensure the lower door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
Ensure the upper door is aligned
horizontally and vertically, so that
the seals are closed on all sides
before finally tightening the hinge.
4. Remove the lower screws and lower
hinge from the unit bottom. Reverse the
lower hinge, move and secure it with
the lower screws to the opposite side of
the unit bottom. Carefully set the lower
door back into place, inserting it onto the
lower hinge.
8. Put the hinge cover back.
9
INSTALLATION
LFC60W16_IB_160201_grace.indd 9 1/2/16 10:43 am
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Domo DO927BFK Le manuel du propriétaire
- español: Domo DO927BFK El manual del propietario
- Deutsch: Domo DO927BFK Bedienungsanleitung
- Nederlands: Domo DO927BFK de handleiding
- slovenčina: Domo DO927BFK Návod na obsluhu
- čeština: Domo DO927BFK Návod k obsluze
Related papers
-
Domo DO989BFK Owner's manual
-
-
-
-
-
Domo DO939K Owner's manual
-
-
-
Domo DO990TDK Owner's manual
-
Other documents
-
Electrolux ERN29850 User manual
-
Thomson TH-TTRL3WH Owner's manual
-
Inventum IKV1781S User manual
-
Inventum RKV1771ROOD User manual
-
Inventum KV1430 User manual
-
Inventum KK500 Owner's manual
-
Proline PLF212W User manual
-
-
LORD R2 Owner's manual
-
BASF inge dizzer XL Series Assembly Instructions Manual
