Unbranded UVUR4 Operating instructions

Brand: Unbranded

Model: UVUR4

Type: Operating instructions

This manual is also suitable for

UVUR1
UVUR6

UTILITY VEHICLE UTILITY RACK

MODEL: UVUR1 (Polaris Ranger), UVUR2 (Kawasaki Mule), UVUR3 (Polaris Ranger

400) & UVUR4 (Honda Big Red), UVUR5 (Kubota 500) & UVUR6 (Kubota 900)

READ ALL INSTRUCTIONS BEFORE INSTALLING UTITLITY RACK.

NOTE: Failure to read instructions before use could result in injury or death.

Instructions for Installation and Use:

Fig.1

Fig.2

Contents: See Fig. 1

2ea. Utility rack side frames w/

eyebolts installed.

1ea. Rear horizontal bar w/ load

stops and eyebolts. (2 pcs.)

1ea. Front horizontal bar. (2 pcs.)

2ea. Load securing straps.

4ea. 5/16 x 2-1/2 bolts.

2ea. 5/16 x 1-3/4 bolts.

6ea. 5/16 locknuts.

20ea. 5/16 flat washers.

4ea. ¼ x 1-1/4 lag screws.

4ea. ¼ x 1-1/4 bolts.

4ea. ¼ locknuts

Assemble front and

rear horizontal bars

using 5/16 x 1-3/4 bolts,

flat washers, and

locknuts. Tighten

securely. (see Figs 2 &

3). NOTE: Fig.4 shows

assembled rear bar and

Fig.5 shows assembled

front bar.

Fig.3

Fig. 4

Fig.5

Fig.6 Fig.7

Attach rear horizontal

bar, (Fig.6), and front

horizontal bar, (Fig.7),

to utility rack side

frames using 5/16 x 2-

1/2 bolts, flat washers,

and locknuts.

Fig.8 Fig.9

Fig.10 Fig.11

Fig.12

Tighten all bolts

securely. (Figs.

8 & 9)

Place assembled rack

onto bed rails in the

desired position and

mark holes for drilling,

(Fig.10). Move rack to

expose marks and drill

holes in bed rail. (Fig.

11). NOTE: If lag

screws are to be used,

drill 1/8” hole. If

underside of bed rail

can be reached and

bolts are used, drill ¼”

hole.

Place utility rack over

drilled holes and secure

to bed rails using the ¼”

x 1-1/4” lag screws and

flat washers or ¼ x 1-

1/4 bolts, flat washers,

and locknuts.(Fig.12).

NOTE: To avoid

stripping plastic bed

rails, do not over-tighten

lag screws.

: PLEASE READ AND FOLLOW ALL INSTRUCTIONS AND WARNINGS FURNISHED

WITH #UVUR UTILITY RACKS.

: MAXIMUM WEIGHT CAPACITY 100 LBS.

: NEVER ALLOW ANYONE TO SIT OR CLIMB ON UTILITY AT ANY TIME.

: NEVER USE UTILITY RACK FOR ANY PURPOSE OTHER THAN INTENDED USE.

: NEVER TRANSPORT A LOAD ON UTILITY RACK WITHOUT IT BEING PROPERLY

SECURED.

For more information about this or other products, contact us at:

Great Day, Inc.

604 Kimbrough Dr. * Tallulah, LA 71282 * (866) 649-1918 * www.greatdayinc.com

Secure load to

utility rack by

attaching “S”

hooks on straps to

eyebolts on utility

rack, (Fig.13), and

pulling tight

through cam

buckle, (Fig.14).

Unbranded UVUR4 Operating instructions

Brand: Unbranded

Model: UVUR4

Type: Operating instructions

This manual is also suitable for

UVUR1
UVUR6

Download PDF

report

Unbranded UVUR4 Operating instructions

This manual is also suitable for

Unbranded UVUR4 Operating instructions

Other documents