MOWA H3322-5050-GD Installation guide

MOWA

Installation Guide--Topmount Sink

1. Position Template

Make sure clearance is suitable for backsplash,

faucet, and plumbing for the sink

2.Clean the top and underside of the counter and the rim

of the sink.

3.Attach Mounting Hardware

Attach mounting hardware to the prongs protruding

from the underside of the sink rim

4. Apply Silicone or Plumber’s Putty

Turn the unit upside down to apply sealant. Apply silicone-based

sealant (not included) underneath the edge of the sink

5. Secure Sink to Countertop

Insert the sink into the opening,Tighten the screws in the front of the sink

Remove excess silicone-based sealant,Rest sealant to set for 30-60 minutes

Sink

Sealant or Putty

oun

ert

Fasten the screw

Push

ush

See Details

6.Connect the trap to the drain.Complete the faucet connections. Run water and check for leaks.

This manual is also suitable for

Download PDF