Danfoss Scroll PSH051-064-077
Electrical Box Gasket
Instructions
FRCC.PI.037.A1.61 - 8510279P01A © Danfoss | DCS (CC) | 2015.05
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Instructions for PSH Electrical Box Gasket
Before mounting the electrical box on the
compressor, make sure that the gasket is properly
positioned in the groove.
Instructions pour joint de boitier électrique
PSH
Avant de monter le boîtier électrique sur
le compresseur, s’assurer que le joint est
correctement positionné dans la gorge.
Istruzioni per la guarnizione della scatola
electtrica PSH
Prima di montare la scatola elettrica sul
compressore, assicurarsi che la guarnizione sia
posizionata correttamente nella gola.
Gasket
Joint
Guarnizione