Package Contents (continued)
Part Description Quantity
A
B
C
1
1
D
E
4
2
2
4
A
F
BB
CC
C
AA
DD
EE
E
Top tray
Bottom tray
Support
Swivel brake plastic caster
Swivel caster without brake
F
1
Tube handle 400mm
CC
D
B
Assembly
1 2
HUSKYTOOLS.COM
5 Please contact 1-888-HD-HUSKY for further assistance.
To install upright supports to trays
and side handle
Start with bottom tray(B). Slot in uprights(C) and attach
with M6x12 bolt(AA) and M6 serrated nut(CC).
Attach top tray(A) in same manner but use the two
M6x16 bolts(BB) when installing handle(F) through
upright support and tray(A,B).
Square up unit and tighten securely. See assembly
diagram.
To install casters
Carefully lay cart on its side, with cardboard or a
soft mat underneath for the purpose of protection.
Position the two swivel brake plastic casters(D) on the
same side of the cart bottom as tube handle(F). Insert
M8x12 hexagon head bolts(DD) thru bottom tray inside.
Repeat for the two swivel casters without brakes(E) on
the other side. See assembly diagram.
□ □
□
□
□
□
Tighten securely with M8 nylon nut(EE) outside.
Package Contents
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part
Description
AA
18
BB
Quantity
2
Bolt M6x16, black
16
EE
Nylon nut M8
20
CC
Nylon nut M6,black
Bolt M6x12, black
16
DD
Hexagon head bolt M8x12
AA
BB CC DD EE
Tools Required
Adjustable Wrench
Slotted Screwdriver
/
